Vermona Modular TAI-4 Manual de Usario

Vermona Modular No categorizado TAI-4

Lee a continuación 📖 el manual en español para Vermona Modular TAI-4 (4 páginas) en la categoría No categorizado. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/4

TAI-4

Owner's Manual

Introduction

Modular systems are just amazing. They are whatever you want them to be, as you

are the one who's responsible for the number and kind of installed modules. It can

be either a simple monophonic synthesizer or an extremely complex sound- and

e ect machine.!

The TAI-4 is an audio interface for your modular system that brings the internal

audio signals out of the system as well as external audio sources into the modular

system. We are aware of the fact that many modules already have audio in- and

outputs, so what's the reason behind making a special module with this

functionality?

Each of the TAI-4s in- and output channel uses an audio transformer that

galvanically isolates and balances the audio signal. Thus potential ground loops

were prevented, the signal stays clear of electro-magnetic interferences. The

TAI-4 should be the module of choice whenever you need to handle high-quality

audio signals.

We are proud to welcome you as VERMONA TAI-4 user. Enjoy the module and be

happy whenever using it during music production and performances.

Your VERMONA team

HDB electronic GmbH

Badesteig 20

08265 Erlbach

GERMANY

Phone: +49 37422 25 30

Fax: +49 37422 23 97

Email: info@vermona.com

http://www.vermona.com

- 1 -

Installation

The TAI-4 is compatible to eurorack modular systems and has to be connected to

the A-100 system bus for operation.

Follow instructions inthe safety and warnings stated your A-100s

manual when installing the module.

Before installing the to themodule be sure disconnect modular

system from mains!

• Connect the 10-pin connector on the TAI-4s rear to the ribbon cable that comes

with the TAI-4. The color marked stripe on the cable is oriented to the bottom.

(see illustration 1)

• Connect the other end of the ribbon cable to the 16-pin connector on the

eurorack style power distribution board of your modular system. The colored

stripe has to be oriented to the negative 12 volt supply line (bottom).

• Use the screws that came with your TAI-4 to mount the module into the modular

frame.

• Now connect the modular system to the mains and switch it on.

Illustration 1: Connecting the TAI-4 to the system bus

Owner's Manual VERMONA TAI-4 - transformer-isolated audio interface

- 2 -

Control Surface Features

Input Section

The input sections features two identical input channels.

(1) IN

balanced female XLR input

(2) LEVEL switch with CLIP LED

With this switch you can set the appropriate

input level.

If it is set to "0dB" the channels output level

equals the input level. Settings "6dB" and

"12dB" increases the level by the

corresponding value.

The CLIP LED indicates too high input levels.

The signal doesn't distort as soon as it

illuminates, there is still some headroom.

(3) OUT

unbalanced 3,5mm jack output

Output Section

The output section features two identical output channels.

(4) IN

unbalanced 3,5mm input jack

(5) LEVEL switch with CLIP LED

With this switch you can decrease the input

level.

If it is set to "0dB" the channels output level

equals the input level. Settings "-6dB" and

"-12dB" decrease the level by the

corresponding value.

The CLIP LED indicates too high input levels.

(6) OUT

balanced male XLR output

Owner's Manual VERMONA TAI-4 - transformer-isolated audio interface

- 3 -

Especificaciones del producto

Marca:	Vermona Modular
Categoría:	No categorizado
Modelo:	TAI-4
Color del producto:	Zilver
Manual de usuario:	Ja
Indicadores LED:	Ja
Control remoto:	IR
Tecnología de conectividad:	Bedraad
red LAN:	Nee
Guía de inicio rápido:	Ja
Tarjeta de garantía:	Ja
Número de puertos USB 2.0:	1
Número soportado de baterías/baterías:	2
Conexión para adaptador de red:	Ja
Interfaz:	USB 2.0
Cámara integrada:	Nee
Conecta y reproduce:	Nee
Salida de audio (izquierdo, derecho):	1
Audio digital, salida óptica.:	1
Cambio de hora:	Nee
Conexiones:	1x IR
Es posible actualizar el firmware:	Ja
Sistemas operativos compatibles:	Win 2000, XP, Vista\nLinux 2.6 +\nMac OS X 10.5 +
Compatibilidad con Mac:	Ja
Salida de vídeo compuesto:	1
Capacidad del disco duro:	0 GB
Interfaz de disco duro:	SATA
Vídeo de grupo de componentes (YPbPr/YCbCr):	1
PictBridge:	Nee
Requerimientos mínimos del sistema:	USB
Salida S/PDIF:	Ja
Tamaño del disco duro:	3.5 "
Capacidad máxima de almacenamiento:	1 TB
Mando a distancia incluido:	Ja
Propiedades especiales:	Chipset: ESS ES6425FF
Unidad, tamaño del búfer:	8 MB
Wifi.:	Nee
Tipo de Batería:	AAA
Sistemas de archivos compatibles:	FAT32
Accesorios adicionales:	Voetstandaard