Worx WG349.9 Manual de Usario

Worx máquina de aserrar WG349.9

Lee a continuación 📖 el manual en español para Worx WG349.9 (22 páginas) en la categoría máquina de aserrar. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/22

Cordless Pole Saw

P02

WARNING: Some dust created by

power sanding, sawing, grinding, drilling

and other construction activities contains

chemicals known to the state of California

to cause cancer, birth defects or other

reproductive harm. Some examples of these

chemicals are:

• Lead from lead-based paints;

• Crystalline silica from bricks and cement

and other masonry products and

• Arsenic and chromium from chemically-

treated lumber.

Your risk from these exposures varies,

depending on how often you do this type

of work. To reduce your exposure to these

chemical: work in a well ventilated area, and

work with approved safety equipment, such as

those dust masks that are specially designed

to ﬁlter out microscopic particles.

WARNING: This product can expose you

to chemicals including lead and Di(2-

ethylhexyl)phthalate (DEHP) which are known

to the State of California to cause cancer and

birth defects or other reproductive harm. For

more information go to www.P65Warnings.

ca.gov

WARNING: Read all safety warnings

and instructions. Failure to follow the

warnings and instructions may result in

electric shock, ﬁre and/or serious injury.

FOR ALL APPLIANCES:

1) Avoid Dangerous Environment - Don’t use

appliances in damp or wet locations.

2) Don’t Use In Rain.

3) Keep Children Away - All visitors should be kept at

a distance from work area.

4) Dress Properly - Do not wear loose clothing or

jewelry. They can be caught in moving parts.

Use of rubber gloves and substantial footwear

is recommended when working outdoors. Wear

protective hair covering to contain long hair.

5) Use Safety Glasses - Always use face or dust mask

if operation is dusty.

6) Use Right Appliance - Do not use appliance for any

job except that for which it is intended.

7) Don’t Force Appliance - It will do the job better and

with less likelihood of a risk of injury at the rate for

which it was designed.

8) Don’t Overreach - Keep proper footing and balance

at all times.

9) Stay Alert - Watch what you are doing. Use

common sense. Do not operate appliance when

you are tired.

10) Store Idle Appliances Indoors - When not in use,

appliances should be stored indoors in dry, and

high or locked-up place - out of reach of children.

11) Maintain Appliance With Care - Keep cutting

edge sharp and clean for best performance and

to reduce the risk of injury. Follow instructions

for lubricating and changing accessories. Keep

handles dry, clean, and free from oil and grease.

12) Check Damaged Parts - Before further use of the

appliance, a guard or other part that is damaged

should be carefully checked to determine that it will

operate properly and perform its intended function.

Check for alignment of moving parts, binding of

moving parts, breakage of parts, mounting, and

any other condition that may affect its operation.

A guard or other part that is damaged should be

properly repaired or replaced by an authorized

service center unless indicated elsewhere in this

manual.

FOR ALL BATTERY – OPERATED GARDENING

APPLIANCES:

1. Prevent unintentional starting. Ensure the switch

is in the off-position before connecting to battery

pack, picking up or carrying the appliance. Carrying

the appliance with your ﬁnger on the switch or

energizing appliance that have the switch on

invites accidents.

2. Disconnect the battery pack from the appliance

before making any adjustments, changing

accessories, or storing appliance. Such preventive

safety measures reduce the risk of starting the

appliance accidentally.

3. Recharge only with the charger speciﬁed by the

manufacturer .A charger that is suitable for one

type of battery pack may create a risk of ﬁre when

used with another battery pack.

4. Use appliances only with speciﬁcally designated

battery packs. Use of any other battery packs may

create a risk of injury and ﬁre.

5. When battery pack is not in use, keep it away from

other metal objects, like paper clips, coins, keys,

nails, screws or other small metal objects, that can

make a connection from one terminal to another.

Shorting the battery terminals together may cause

burns or a ﬁre.

6. Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact

accidentally occurs, ﬂush with water. If liquid

contacts eyes, additionally seek medical help.

Liquid ejected from the battery may cause irritation

or burns.

7. Do not use a battery pack or appliance that is

damaged or modiﬁed. Damaged or modiﬁed

batteries may exhibit unpredictable behavior

resulting in ﬁre, explosion or risk of injury.

8. Do not expose a battery pack or appliance to

ﬁre or excessive temperature. Exposure to ﬁre

or temperature above 265°F (130°C) may cause

explosion.

9. Follow all charging instructions and do not charge

the battery pack or appliance outside of the

temperature range speciﬁed in the instructions.

Charging improperly or at temperatures outside of

the speciﬁed range may damage the battery and

increase the risk of ﬁre.

10. Have servicing performed by a qualiﬁed repair

person using only identical replacement parts.

This will ensure that the safety of the product is

maintained.

11. Do not modify or attempt to repair the appliance or

the battery pack (as applicable) except as indicated

in the instructions for use and care.

POLE SAW SAFETY WARNINGS

WARNING - Do not operate near electrical power

lines. The unit has not been designed to provide

protection from electric shock in the event of contact

with overhead electric lines, Consult local regulations

for safe distances from overhead electric power lines

and ensure that the operating position is safe and

secure before operating the saw chain pole pruner.

a) Keep all parts of the body away from the saw

chain. Make sure the switch is off when clearing

jammed material. Saw chain continues to move

after the switch is turned off. A moment of

inattention while operating the pole pruner may

result in serious personal injury.

b) Carry the pole pruner by the handle with the saw

chain stopped. When transporting or storing the

pole pruner, always ﬁt the saw chain device cover.

Proper handling of the pole pruner will reduce

possible personal injury from the saw chain.

c) Hold the pole pruner by insulated gripping surfaces

only, because the saw chain may contact hidden

wiring or its own cord. A saw chain contacting a

“live” wire may make exposed metal parts of the

pole pruner “live” and could give the operator an

electric shock.

d) Keep cable away from cutting area. During

operation the cable may be hidden in shrubs and

can be accidentally cut by the saw chain.

e) Do not use the pole pruner in bad weather

conditions, especially when there is a risk of

lightning. This decreases the risk of being struck by

lightning.

f) To reduce the risk of electrocution, never use near

any electrical power lines. Contact with or use near

power lines may cause serious injury or electric

shock resulting in death.

g) Always use two hands when operating the pole

pruner. Hold the pole pruner with both hands to

avoid loss of control.

h) Always use head protection when operating the

pole pruner overhead. Falling debris can result in

serious personal injury.

Safety Warnings for battery pack

a) Do not dismantle, open or shred battery

pack.

b) Do not expose battery pack to heat or ﬁre.

Avoid storage in direct sunlight.

c) Do not short-circuit a battery pack. Do not

store battery packs haphazardly in a box or

drawer where they may short-circuit each

other or be short-circuited by other metal

objects.

When battery pack is not in use, keep it

away from other metal objects, like paper clips,

coins, keys, nails, screws or other small metal

objects, that can make a connection from one

terminal to another. Shorting the battery terminals

together may cause burns or ﬁre.

d) Do not remove battery pack from its

original packaging until required for use.

e) Do not subject battery pack to mechanical

shock.

f) In the event of battery leaking, do not allow

the liquid to come in contact with the skin

or eyes. If contact has been made, wash

the affected area with copious amounts of

water and seek medical advice.

g) Observe the plus (+) and minus (–) marks on

the battery back and equipment and ensure

correct use.

h) Do not use any battery pack which is not

designed for use with the equipment.

i) Keep battery pack out of the reach of

children.

j) Seek medical advice immediately if a cell or

battery has been swallowed.

k) Always purchase the battery pack

recommended by the device manufacturer

for the equipment.

l) Keep battery pack clean and dry.

m) Wipe the battery pack terminals with a

clean dry cloth if they become dirty.

n) Battery pack needs to be charged before

use. Always use the correct charger and

refer to the manufacturer’s instructions

or equipment manual for proper charging

instructions.

o) Do not leave battery pack on prolonged

charge when not in use.

p) After extended periods of storage, it may

be necessary to charge and discharge

the battery pack several times to obtain

maximum performance.

q) Battery pack gives its best performance

when it is operated at normal room

temperature (20 °C ± 5 °C).

r) When disposing of battery packs, keep

battery packs of different electrochemical

systems separate from each other.

s) Recharge only with the charger speciﬁed

by WORX. Do not use any charger other

than that speciﬁcally provided for use with

the equipment.

A charger that is suitable for one

type of battery pack may create a risk of ﬁre when

used with another battery pack.

t) Retain the original product literature for

future reference.

u) Use only the battery pack in the application

for which it was intended.

v) Remove the battery pack from the

equipment when not in use.

w) Dispose of properly.

SAVE THESE INSTRUCTIONS

Especificaciones del producto

Marca:	Worx
Categoría:	máquina de aserrar
Modelo:	WG349.9

¿Necesitas ayuda?

Si necesitas ayuda con Worx WG349.9 haz una pregunta a continuación y otros usuarios te responderán

Tu nombre*

Tu correo electrónico*

Escribe tu pregunta aquí

máquina de aserrar Worx Manuales

Worx WX529L.9 Manual de Usario

20 Septiembre 2024

Worx WA4301 Manual de Usario

19 Septiembre 2024

Worx WG349.9 Manual de Usario

17 Septiembre 2024

Worx WA0307 Manual de Usario

15 Septiembre 2024

Worx WX437 Manual de Usario

15 Septiembre 2024

Worx WX523L.9 Manual de Usario

15 Septiembre 2024

Worx Nitro WX542.9 Manual de Usario

14 Septiembre 2024

Worx WX473 Manual de Usario

14 Septiembre 2024

Worx WX801L.1 Manual de Usario

30 Agosto 2024

Worx WG385 Manual de Usario

16 Agosto 2024

máquina de aserrar Manuales

Últimos máquina de aserrar Manuales

Hikoki C 6BU3 Manual de Usario

27 Octubre 2024

Dedra DED7060 Manual de Usario

27 Octubre 2024

Einhell KGS 190 Manual de Usario

27 Octubre 2024

Sun Joe SWJ599E Manual de Usario

27 Octubre 2024

McCulloch CSE1935S Manual de Usario

27 Octubre 2024

Hikoki C10FSB Manual de Usario

27 Octubre 2024

Metabo STA 18 LTX 150 BL Manual de Usario

26 Octubre 2024

Craftsman 917.377662 Manual de Usario

26 Octubre 2024

Maruyama MCV51 Manual de Usario

26 Octubre 2024

Powerplus POWX53300T Manual de Usario

22 Octubre 2024