Yamaha NS-10MMTS Manual de Usario

Yamaha Sistema de altavoces NS-10MMTS

Lee a continuación 📖 el manual en español para Yamaha NS-10MMTS (5 páginas) en la categoría Sistema de altavoces. Esta guía fue útil para 16 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/5

English

E-1

Read this before using the speakers.

●

To assure the finest performance, please read this manual

carefully. Keep it in a safe place for future reference.

●

Install the speakers in a cool, dry, clean place – away from

windows, heat sources, sources of excessive vibration,

dust, moisture and cold. Avoid sources of humming

(transformers, motors). To prevent fire or electrical shock,

do not expose the speakers to rain or water.

● To prevent the enclosure from warping or discoloring, do

not place the speakers where they will be exposed to

direct sunlight or excessive humidity.

● Do not place the following objects on the speakers:

Glass, china, etc.

If glass etc. falls by vibrations and breaks, it may cause

personal injury.

A burning candle etc.

If the candle falls by vibrations, it may cause fire and

personal injury.

A vessel with water in it

If the vessel falls by vibrations and water spills, it may

cause damage to the speakers, and/or you may get an

electric shock.

● Do not place the speakers where foreign objects such as

water drips might fall. It might cause a fire, damage to

the speakers, and/or personal injury.

● Do not place the speakers where they are liable to be

knocked over or struck by falling objects. Stable

placement will also ensure better sound performance.

PRECAUTIONS

Thank you for selecting this YAMAHA NS-10MMTS speaker system.

● Placing the speakers on the same shelf or rack as the

turntable can result in feedback.

● Never put a hand or a foreign object into the port located

on the rear of the speaker as this might cause personal

injury and/or damage to the speaker.

● When moving the speaker, do not hold the port as it

might cause personal injury and/or damage to the

speaker.

● Any time you note distortion, reduce the volume control

on your amplifier to a lower setting. Never allow your

amplifier to be driven into “clipping”. Otherwise the

speakers may be damaged.

●

When using an amplifier with a rated output power higher

than the nominal input power of the speakers, care should

be taken never to exceed the speakers’ maximum input.

●

Do not attempt to clean the speakers with chemical solvents

as this might damage the finish. Use a clean, dry cloth.

● Do not attempt to modify or fix the speakers. Contact

qualified YAMAHA service personnel when any service

is needed. The cabinet should never be opened for any

reasons.

● Secure placement or installation is the owner’s

responsibility.

YAMAHA shall not be liable for any accident caused

by improper placement or installation of speakers.

Check that the following items are included.

Speaker cable (10m) x 1 Mounting bracket x 1 Screw x 2 Pad x 2

ACCESSORIES

NS-10MMTS Speaker System

OWNER’S MANUAL

E-2

Place the speaker precisely between the rear speakers as

shown in the figure below.

■ To mount the speaker on a wall by using

the provided mounting bracket

1 Attach the bracket to the rear of the speaker by using the

provided screws. Remove the provided pads from the

backing sheet and put them at the lower corners of the

speaker.

PLACING THE SPEAKER

2Fasten screws into a firm wall or wall support as shown

in the figure, and hang the holes of the mounting

bracket on the protruding screws.

* Make sure that the screws are securely caught by the

narrow parts of the holes.

WARNING

● This speaker weighs 1.5 kg (3 lbs. 5 oz.). Do not

mount it on thin plywood or a wall with soft surface

material. If mounted, the screws may come out of the

flimsy surface and the speaker may fall. This

damages the speaker or causes personal injury.

● Do not install the speaker to a wall with nails,

adhesives, or any other unstable hardware. Long-

term use and vibrations may cause it to fall.

● To avoid accidents resulting from tripping over loose

speaker cable, fix it to the wall.

● This speaker features a magnetically shielded design,

but there is still a chance that placing it too close to a

TV set might impair picture color. Should this

happen, move the speaker away from the TV set.

Rear R

60 mm

You can also use the screw holes on the bottom of the

speaker for installing the speaker on commericially

available speaker stand (if you do not use the provided

mounting bracket.)

A screw with a diameter of 4 mm can be

used.

(Hole depth : 10 mm)

Wall/ wall

support

Tapping screw (3.5–4 mm)

(Available at the hardware

store)

40 mm

Min.

20 mm

3 mm

Pad

Screw

Mounting bracket

Rear L

Subwoofer

Center

Main L

Main R

NS-10MMTS

English

E-3

–

REAR

CENTER

CONNECTIONS TO YOUR AMPLIFIER

Amplifier or

Receiver

Tighten

NS-10MMTS

Before making connections, make sure that the amplifier is switched off.

■ CONNECTIONS

• Connect the screw-type input terminals at the rear of the

speaker to the speaker output terminals of the amplifier

(or receiver) with the speaker cable.

• Connect the (+) terminals on the amplifier (or receiver)

and the speaker using one side of the cable. Connect the

(–) terminals on both components using the other side of

the cable.

• Connect the speaker to the rear center terminals of your

amplifier (or receiver), making sure not to reverse the

polarity (+, –). If the speaker is connected with reversed

polarity, the sound will be unnatural and lack bass.

How to connect:

1 Loosen the knob.

2 Remove the insulation coating at the extremity of each

speaker cable by twisting the coating off.

3 Insert the bare wire.

4 Tighten the knob and secure the cable.

Test the firmness of the connection by pulling lightly on

the cable at the terminal.

Note

Do not let the bare speaker wires touch each other as

this could damage the speaker or the amplifier, or both

of them.

Loosen

Black (–)

When using a banana plug

1 Remove the cover by pulling it toward you.

2 Tighten the terminal knob.

3 Simply insert the banana plug into the terminal.

Banana plug

Red (+)

–+

Especificaciones del producto

Marca:	Yamaha
Categoría:	Sistema de altavoces
Modelo:	NS-10MMTS
Color del producto:	Wit
Ancho:	- mm
Profundidad:	- mm
Altura:	- mm
Amable:	Zonder reservoir
Interruptor encendido / apagado:	Ja
Capacidad del tanque de agua:	80 l
Soporte de colocación:	Horizontaal/Verticaal
Termostato ajustable:	Ja
Temperatura (máx.):	75 °C
Rango de termostato:	30 - 75 °C
Termómetro:	Ja
Poder maximo:	1200 W
Carga de trabajo máxima:	5 bar
Material del tanque de agua:	Geëmailleerd staal
Consumo de energía (típico):	2000 W
Ubicación de calefacción:	Binnen
Soporte de baterías de energía solar.:	Nee
Combustible:	Electrisch
sistema de caldera:	Combi-boilersysteem
Capacidad de agua caliente:	- l/min
potencia minima:	800 W
Material del elemento calefactor:	Keramisch
Tipo de conexión de entrada:	G 1/2
Control electrónico de corriente.:	Ja
Espesor del aislamiento:	20 mm