Azden PRO-XD Manual de Usario

Azden micrófono PRO-XD

Lee a continuación 📖 el manual en español para Azden PRO-XD (8 páginas) en la categoría micrófono. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/8
PRO-XD
DIGITAL WIRELESS
MICROPHONE SYSTEM
OPERATION MANUAL
SAFETY CAUTION
Congratulations on purchasing the Azden® i-Coustics™
PRO-XD Digital Wireless Microphone System. The
PRO-XD was designed to provide amateur and semi-
professional video producers alike with a high quality,
yet affordable wireless audio solution.
The PRO-XD is Azden’s first wireless system to use
2.4GHz digital wireless technology, which vastly
improves on sound quality (over VHF) and eliminates
interference issues with radio and TV frequencies.
Compatible with DSLR cameras, camcorders,
smartphones, tablets and computers, the PRO-XD is a
versatile wireless microphone and its compact and
simple design makes it very user friendly.
Each PRO-XD system includes a body-pack transmitter
(PRO-XDT), receiver with attached shoe mount (PRO-
XDR), a lapel microphone (EX-503XD), audio output
cable, a TRRS adapter cable (HX-i) and a USB
charging cable with AC adapter.
WARNING: DO NOT ATTEMPT TO OPEN THE CASING OR MAKE ANY MODIFICATION TO THE
INTERNAL ELECTRICAL COMPONENTS. ELECTRIC SHOCK OR INJURY MAY RESULT.
WARNING: ANY UNAUTHORIZED MODIFICATION TO THIS PRODUCT WILL VOID ANY APPLICABLE
WARRANTIES.
WARNING: DO NOT STORE OR OPERATE THIS PRODUCT NEAR A HEAT SOURCE OR IN AN
ENVIRONMENT OF EXTREME TEMPERATURES. AVOID EXPOSURE TO RAIN OR ANY OTHER SOURCE
OF MOISTURE. DO NOT SUBMERGE IN WATER. IF EXTERIOR IS EXPOSED TO WATER, WIPE DRY
BEFORE USE.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices).
Radiation Exposure Statement
This equipment complies with FCC RF and IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of 0.5 centimeters between the radiator and your body. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance
of at least 0.5 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
This device complies with Part 15 of the FCC Rules and with RSS-247 of the Industry Canada Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux
deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
PRO-XDT PRO-XDR
EX-503XD
HX-i TRRS
Adapter
AC Power
Adapter
USB-mini to
USB-A Cable Audio Output
Cable
PRO-XD Kit Contents
1
PRO-XDT Transmitter
Parts And Functions
①
Antenna
②
Power & Sync Button
③ Input Selector
④ Aux Input
⑤ Belt Clip
⑥ Reset
⑦ Power Indicator
⑧ Signal Indicator
⑨ Microphone Input
⑩ Mini USB Charging Port
Operation
Power On/Off
Turn on the PRO-XDT by pressing and holding the Power Button for 1 second. If the unit has sufficient ②
battery power the Power Indicator light will be green. This light will turn red when the remaining battery ⑦
life is low. To turn off the transmitter, press and hold the Power Button for 3 seconds until the Power ②
Indicator light goes off.⑦
Signal Indicator
The Signal Indicator on the transmitter has two statuses. When the light is lit solid green it means the ⑧
unit is broadcasting a wireless signal. If this light is flashing green, it indicates that the transmitter is in sync
mode and trying to establish a connection. See detailed instructions on pairing on page 4.
Input Selector
Select the audio input source with the Input Selector . This switch has 3 settings. Moving the switch ③
towards the microphone icon selects the Microphone Input (Fig. 1). Moving the switch towards the words ⑨
“AUX IN” selects the Aux Input (Fig 2.). Setting the switch in the middle will allow you to use both inputs ④
simultaneously (Fig. 3).
Microphone & Aux Inputs
The PRO-XDT has two audio inputs. The Microphone Input is a 3.5mm TRRS jack located at the top of ⑨
the unit and is designed to accept a mono, microphone level signal. Plug the EX-503XD lapel microphone in
to this input. The Aux Input is a 3.5mm TRS jack located on the side of the unit and is designed to accept ④
a stereo, line level signal. This can be used for transmitting audio from the headphone output of a
smartphone or line out of an audio mixer. Additional cables and adapters (not included with this system) may
be required in order to connect line level equipment.
Charging
To charge the transmitter, use the included USB cable and AC adapter. Plug the mini end of the USB cable
into the receiver’s Mini USB Charging Port and then plug the USB-A end into the included AC adapter (to ⑩
be plugged into a power socket). Alternatively, the USB-A end of the cable may be plugged into a computer
USB port. Charge time for an empty battery is approximately 3.5 hours. During charging the Power Indicator
⑦ will be red; once the battery is full, this light will turn off.
10
8 7
9
1
2
3
4
6
5
2
Fig. 1 Fig. 2 Fig. 3

Especificaciones del producto

Marca: Azden
Categoría: micrófono
Modelo: PRO-XD

¿Necesitas ayuda?

Si necesitas ayuda con Azden PRO-XD haz una pregunta a continuación y otros usuarios te responderán


micrófono Azden Manuales

Azden

Azden SGM-250CX Manual de Usario

6 Octubre 2024
Azden

Azden WMS-PRO Manual de Usario

15 Septiembre 2024
Azden

Azden PRO-XD Manual de Usario

22 Agosto 2024
Azden

Azden 1201URX/SI Manual de Usario

22 Agosto 2024
Azden

Azden SMX-10 Manual de Usario

15 Agosto 2024
Azden

Azden 2000XT Manual de Usario

11 Agosto 2024
Azden

Azden 2000URX/SI-S Manual de Usario

4 Agosto 2024
Azden

Azden SMX-30V Manual de Usario

27 Julio 2024
Azden

Azden SMX-15 Manual de Usario

23 Julio 2024
Azden

Azden SGM-1X Manual de Usario

22 Julio 2024

micrófono Manuales

Últimos micrófono Manuales

Shure

Shure SBC210LM Manual de Usario

25 Octubre 2024
Akg

Akg GN50 M Manual de Usario

25 Octubre 2024
Countryman

Countryman B6 Manual de Usario

19 Octubre 2024
Pyle

Pyle PMKSHUSB04 Manual de Usario

19 Octubre 2024
Trust

Trust 21670 Manual de Usario

18 Octubre 2024
Neumann

Neumann U 87 Ai Manual de Usario

18 Octubre 2024
BOYA

BOYA BY-PM700 Manual de Usario

18 Octubre 2024
Audio-Technica

Audio-Technica BP892xCW Manual de Usario

17 Octubre 2024
Audio-Technica

Audio-Technica BP4073 Manual de Usario

15 Octubre 2024
Power Dynamics

Power Dynamics PD524 Manual de Usario

15 Octubre 2024