Azden SMX-30V Manual de Usario

Azden micrófono SMX-30V

Lee a continuación 📖 el manual en español para Azden SMX-30V (2 páginas) en la categoría micrófono. Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/2

Parts

① Stereo microphone

② Shotgun microphone

(mono)

③ Battery Compartment

④ Shock Mount

⑤Shoe Mount

⑥ 3.5 mm Audio Cable

⑦Stereo/Mono Mixing Dial

⑧ Low-cut Filter Switch

⑨ Gain Adjustment Switch

⑩ Power Switch

⑪ LED Battery Indicator

⑫Mic Output Jack

⑬Windscreen

Congratulations on your purchase of the Azden SMX-30V Stereo/Mono Mixable Video Microphone.

This product is eligible for coverage under Azden’s Limited 10 Year Warranty. To obtain your 10 year

warranty, please register your microphone online at within 90 days of www.azden.com/register

purchase.*

*Azden’s 10 year warranty is not available in all countries and not all Azden products are eligible.

See www.azden.com for details.

Azden Ten Year Limited Warranty

Azden Corporation warrants, to the first purchaser, that the Azden brand product purchased is free

from defects in material and workmanship. Azden’s sole obligation under this warranty shall be to

provide, without charge, repair or replacement (at Azden’s sole discretion), within ten years from the

date of purchase. A dated receipt is required to establish the date of purchase and online registration

within 90 days of purchase is required to receive warranty service under this Ten Year Limited

Warranty. The cost to ship a failed product to and from Azden or to its dealer shall not be covered by

this warranty.

This warranty is the sole and exclusive express warranty given with respect to the product and all

other warranties, expressed or implied, are hereby excluded. Neither Azden, nor the dealer who sells

this product, is responsible for indirect, incidental or consequential damages.

This warranty does not extend to any defect, malfunction or failure caused by misuse, abuse,

accident, act of God, faulty hookup, unauthorized modification, connecting this product to equipment

for which it is not intended or defective associated equipment.

10 YEAR WARRANTY

Customers in the Asia and Oceania markets contact:

Azden Corp., 1-12-17 Kamirenjaku Mitaka-shi, Tokyo, 181-8533 Japan

Tel: +81-1-422-55-5115 (Japan) • Fax: +81-422-55-0131 (Japan)

www.azden.co.jp • email: sales@azden.co.jp

Customers in the North/South America and European markets contact:

Azden Corp., 200 Valley Road, Suite 101, Mt. Arlington, NJ 07856

Tel: +1-973-810-3070 • Fax: +1-973-810-3076

www.azden.com • email: sales@azden.com

Caution

DO NOT ATTEMPT TO OPEN THE CASING OR MAKE ANY MODIFICATION TO THE INTERNAL

ELECTRICAL COMPONENTS. ELECTRIC SHOCK OR INJURY MAY RESULT. ANY

UNAUTHORIZED MODIFICATION TO THIS PRODUCT WILL VOID ALL APPLICABLE

WARRANTIES.

DO NOT STORE OR OPERATE THIS PRODUCT NEAR A HEAT SOURCE OR IN AN

ENVIRONMENT OF EXTREME TEMPERATURES. AVOID EXPOSURE TO RAIN OR ANY OTHER

SOURCE OF MOISTURE. DO NOT SUBMERGE IN WATER. IF EXTERIOR IS EXPOSED TO

WATER, WIPE DRY BEFORE USE.

REMOVE BATTERIES BEFORE STORING THIS MICROPHONE FOR AN EXTENDED PERIOD

OF TIME. OLD ALKALINE BATTERIES HAVE THE POTENTIAL TO LEAK AND CAUSE DAMAGE

TO THE INTERNAL COMPONENTS OF THE MICROPHONE. ADDITIONALLY, BATTERY ACID

CAN BE HARMFUL IF CONTACT IS MADE WITH THE SKIN OR EYES; IF THIS HAPPENS, WASH

WITH WATER IMMEDIATELY. USE CAUTION WHEN HANDLING DISCHARGED BATTERIES.

PLEASE TAKE THE TIME TO READ THIS MANUAL CAREFULLY AND KEEP IT FOR YOUR

REFERENCE.

AUTOBATTOFF

Specifications

Polar Pattern: Mono: Supercardioid

Stereo: 2x Cardioid

Freq Response: 40 Hz - 20 kHz

Sensitivity: -38 dB @ 1 kHz

Dyn Range: 118 dB

S/N Ratio: 82 dB, 1 kHz@1 Pa

Max Input Level: 126 dB SPL (1 kHz@ 1% T.H.D.)

Max Output Level: +10.2 dBu

Output Impedance: 75 Ω

Power Req: (2) AA batteries (not incl.)

Audio Output: 3.5 mm stereo TRS female

Power Switch: Off, Battery, Auto

Gain Control: -10 dB, 0 dB, +20 dB

LCF: 60 Hz, 3 dB/octave

Dimensions: 47 mm x 111 mm x 154 mm

Weight: 160 g (approx.)

OPERATION

MANUAL

SMX-30V

Stereo/Mono Mixable

Video Microphone English

Quick Start Guide

Insert two AA batteries

matching the polarity inside

the battery compartment.

Slide the microphone’s

shoe into your camera’s

shoe slot.

Tighten the thumb wheel

by turning it counter-clock-

wise to secure the

microphone. WARNING:

Do Not Overtighten!

Connect one end of the

audio output cable to the

microphone’s output jack.

Connect the other end of

the audio output cable to

the mic input on your

camera.

The SMX-30V requires AA batteries in order to function. Please install before use.

Power Switch

The microphone is powered off and will not drain the batteries.

The microphone is powered on and will continue to drain the batteries even

when disconnected from a camera.

The microphone will be powered on/off in conjunction with the connected

camera, and will be automatically powered off when disconnected. In order to

work, the AUTO feature requires the connected camera’s MIC input to provide

plug-in power. If the AUTO feature is not working, consult your camera’s manual.

The LED Battery Indicator light illuminates RED continuously to indicate good battery life.

From the time the LED first goes out, about 1 hour of battery life will remain; It is

recommended to change the batteries as soon as possible once this occurs.

Postition of the power switch

  



OFF BATT AUTO OFF BATT AUTOOFF BATT AUTO

Stereo/Mono Mixing Dial

By turning the mixing dial, you can vary the balance of audio

captured by the stereo microphone and shotgun microphone.

To record only from the stereo microphone, turn the dial fully

counter-clockwise. To record only from the shotgun

microphone, turn the dial fully clockwise. Or set the dial at any

place in-between to create the desired mix of sound from the

two microphones.

STEREO MONO

Gain Adjustment Switch

Reduces the audio output level by 10 dB. Use this setting if the level going

into your camera is initially too loud. The level reduction occurs before the

microphone’s gain stage so to protect against internal distortion as well.

Disengages the gain adjustment and the output level is left unaffected.

Increases the audio output level by 20 dB. This setting is best for recording

very soft sounds or for optimizing signal-to-noise ratio with DSLR cameras.

-10

+20

Shock Mount

When the subject is located near the edge of the visual field, the swivel function in the

mount lets you point the microphone towards the subject without changing the position

of your camera, via a horizontal rotation adjustment of approximately 30 degrees to

the left or right. After attaching your camera to the microphone, rotate the microphone

to the position you like. Attach the cable firmly to one of the notches on the shock

mount to reduce noise produced by contact. For more effective attachment, run the

cable along the shoe adapter before attaching it to a notch.

Windscreen

The Windscreen is designed to

protect against light wind condition

when recording outdoors.

Cable (3.5 mm)

Connect each end of the cable

to the microphone’s output jack

and your camera’s input jack.

Function

MIC

Low-Cut Filter Switch

The low-cut filter switch can be used to help mitigate low-frequency noise when it’s

present in the surrounding environment by reducing the gain of low frequencies

recorded by the microphone. Examples of low-frequency noise include the hum

from a fan, vehicles passing on a busy nearby street, buzz from fluorescent lights,

air blowing from an HVAC system, etc.

The low-cut filter switch has two positions, indicated by a flat line and an angled line.

Low-Cut Filter is OFF Low-Cut Filter is ON

Especificaciones del producto

Marca:	Azden
Categoría:	micrófono
Modelo:	SMX-30V
Color del producto:	Zwart
Peso.:	23000 g
Ancho:	261 mm
Profundidad:	506 mm
Altura:	398.7 mm
Color:	Nee
Bluetooth:	Ja
Mostrar.:	LCD
Diagonal de la pantalla:	3.5 "
Puerto USB:	Ja
Tecnología de conectividad:	Bedraad en draadloos
red LAN:	Ja
Cables suministrados:	AC
Número de puertos USB 2.0:	2
Memoria interna:	1024 MB
Bluetooth de bajo consumo (BLE):	Ja
Tipo de procesador:	Ja
Memoria flash:	256 MB
Resolución-Máxima:	203 x 203 DPI
Diámetro máximo del rollo:	80 mm
tecnología de impresión:	Direct thermisch/Thermische overdracht
Idiomas de descripción de la página:	DP, DPL, XML, ZPL II, IPL
Ancho máximo de impresión:	108 mm
Velocidad de impresión (métrica):	- mm/sec
voltaje-de-entrada-de-CA:	100 - 240 V
Frecuencia-de-entrada-de-CA:	50/60 Hz
Temperatura de funcionamiento (TT):	5 - 40 °C
Humedad relativa de funcionamiento (VV):	20 - 85 procent
Código del Sistema Armonizado (SA):	84433210
Diámetro central:	25 mm
Ancho de la cinta:	110 mm
Resorte de cinta:	450 m
Longitud mínima de impresión:	4800 mm