Bigben XBHS10 Manual de Usario

Lee a continuación 📖 el manual en español para Bigben XBHS10 (17 páginas) en la categoría Auriculares. Esta guía fue útil para 15 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/17
2
XBHS10 gaming headset for use with XBOX360
Introduction
Thank you for purchasing the XBHS10 gaming headset, for use with XBOX360™, by Bigben Interactive. This
product has been designed to enhance the audio experience of your console. Please follow the instructions
carefully to ensure your product is set up correctly.
Contents
• XBHS10 headset
• Stereo RCA adaptor extension cable
• Controller chat cable
• User manual
Use
Installing the headset
Before you start connecting cables you should adjust some settings within your XBOX360™ console to ensure
the correct audio signals are being sent. To do this, follow these steps:
1. Press the XBOX360™ guide button in the centre of your controller to open the Dashboard.
2. Navigate to the right to the Settings area and scroll down to “Preferences” from the menu. Then press the
“A” button.
3. On the Preferences screen, select the “Voice” option and Press “A”.
4. Select the “Play Through Headset” option and then set the Volume to 10.
You are now ready to start setting up your cables.
3
Connecting directly to your console
1. If you are using the original composite cable supplied with your XBOX360™ console (ending with the 3
yellow, red and white connection plugs) simply unplug the red and white connections and plug them into the
round sockets on the RCA extension cable.
2. Then plug the RCA extension cable back into the TV in the exact same sockets you removed them from.
3. Plug the green coloured 3.5mm plug from your headset into the green coloured female 3.5mm socket on
your extension cable.
4. Plug the USB cable into a spare USB socket on the front or rear of your console.
5. Plug the 2.5mm jack on the controller chat cable into the headset socket on the front of your controller. Plug
the other end of the controller chat cable, into the chat socket on the remote unit.
6. Set the selection switch on the remote to XB mode and adjust the volume control on the remote to your
desired level and ensure that the Mic control is switched to the on position. If you do not want players to
hear you, slide the Mic position to off.
7. Adjust the chat level volume control to your desired level so you can clearly hear other players on Xbox live.
TV
SPK
MIC
XBOX 360tm
Connecting your headset if you are using an HDMI cable
If you are using an HDMI cable on your console and you do not have RCA audio outputs on your TV you will
need to purchase an XBOX360™ audio adaptor. This then allows you to take your sound from the console
even when you are using HDMI. These adaptors can be purchased from online retailers.*
1. To use the adaptor, rstly connect the main plug to the AV socket on the rear of your XBOX360™ console. It
is situated next to the HDMI output.
2. Then plug the RCA extension cable back into audio adaptor, using the red and white plugs.
3. Plug the green coloured 3.5mm plug from your headset into the green coloured female 3.5mm socket on
your extension cable.
4. Plug the USB cable into a spare USB socket on the front or rear of your console.
5. Plug the 2.5mm jack on the controller chat cable into the headset socket on the front of your controller. Plug
the other end of the controller chat cable, into the chat socket on the remote unit.

Especificaciones del producto

Marca: Bigben
Categoría: Auriculares
Modelo: XBHS10

¿Necesitas ayuda?

Si necesitas ayuda con Bigben XBHS10 haz una pregunta a continuación y otros usuarios te responderán




Auriculares Bigben Manuales

Auriculares Manuales

Últimos Auriculares Manuales