Black Box LES1548A Manual de Usario

Black Box servidor LES1548A

Lee a continuación 📖 el manual en español para Black Box LES1548A (8 páginas) en la categoría servidor. Esta guía fue útil para 13 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/8
Works with LES1200, LES1300, and LES1500 Series
console servers.
OpenVPN for LES Series Console Servers
LES1200, LES1300, LES1500 Series
Order toll-free in the U.S. or for FREE technical support: Call 877-877-BBOX
(outside U.S. call 724-746-5500)
www.blackbox.com • info@blackbox.com
Contact
Information
OpenVPN connection on the Black Box console servers
The LES1200 Series (LES1202A-R2, LES1204A-R2, LES1203A-11G, LES1203A-M-R2, LES1204A-3G-R2), LES1300 Series
(LES1308A, LES1316A, LES1332A, LES1348A), and LES1500 Series (LES1508A, LES1516A, LES1532A, LES1548A)
console servers with Firmware V3.2 and later each have OpenVPN clients and server software embedded.
OpenVPN allows secure VPN tunneling of data through a single TCP/UDP port over an unsecured network. So an
OpenVPN tunnel could be established between a roaming Windows client and a console server within a data center.
Or, OpenVPN tunnels could be set up between distributed LES1204A-3G-R2 edge devices (which may not have any
publicly accessible IP addresses allocated from their carrier) and some third-party OpenVPN server at the enterprise
central management site.
Configuring OpenVPN can be complex, so Black Box provides a simple GUI interface for basic set up. More detailed
information on the OpenVPN Access server and client can be found at https://openvpn.net.
Enabling OpenVPN on your console server:
Select OpenVPN on the Serial & Networks menu.
Click Add and complete the Add OpenVPN Tunnel screen (see the illustration on the next page).
877-877-2269 | blackbox.com Page 2
OpenVPN for LES Series Console Servers
Enter any descriptive name you wish to identify the OpenVPN Tunnel you are adding, for example NorthStOutlet-VPN.
Check Enabled to enable the tunnel.
Check Control by Auto-Response if the tunnel is to be controlled by "Network Interface" Auto-Response action. If selected, the
default state for the tunnel will be Down
Select the authentication method to be used. To authenticate using certificates, select PKI (X.509 Certificates) or select Custom
Configuration to upload custom configuration files. Custom configurations must be stored in/etc/config
Page 3877-877-2269 | blackbox.com
OpenVPN for LES Series Console Servers
NOTE: If you select PKI (public key infrastructure), you will need to establish:
1. Separate certificate (also known as a public key). This Certificate File will be a *.crt file type.
2. Private Key for the server and each client. This Private Key File will be a *.key file type.
3. Master Certificate Authority (CA) certificate and key, which is used to sign each of the server and client certificates.
This Root CA Certificate will be a *.crt file type.
4. For a server, you may also need dh1024.pem (Diffie Hellman parameters). Refer to https://openvpn.net for a
guide to basic RSA key management, or for alternative authentication methods.
Select the Device Driver to be used, either Tun-IP or Tap-Ethernet. The TUN (network tunnel) and TAP (network tap) drivers are
virtual network drivers that support IP tunneling and Ethernet tunneling, respectively. TUN and TAP are part of the Linux
® kernel.
Select either UDP or TCP as the Protocol. UDP is the default and preferred protocol for OpenVPN.
In Tunnel Mode, nominate whether this console server is to be the Client or Server end of the tunnel. When running as a
Server, the console server supports multiple clients connecting to the VPN server over the same port.
Check or uncheck the Compression button to enable or disable compression, respectively.

Especificaciones del producto

Marca: Black Box
Categoría: servidor
Modelo: LES1548A

¿Necesitas ayuda?

Si necesitas ayuda con Black Box LES1548A haz una pregunta a continuación y otros usuarios te responderán




servidor Black Box Manuales

servidor Manuales

Últimos servidor Manuales