Case-mate CM031201 Manual de Usario

Case-mate powerbank CM031201

Lee a continuación 📖 el manual en español para Case-mate CM031201 (7 páginas) en la categoría powerbank. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/7
MOBILE CHARGER
COMPATIBILITY
The Case-Mate Mobile Charger is compatible with the following Apple devices with a Lightning
connector port:
GETTING START ED
What’s Included
iPhone 6 Plus iPhone 6 iPhone 5/5s/5c iPod touch
5th Generation
charging port
Before You Begin
Make sure your Mobile Charger is fully charged before the fi rst use. Connect the included micro
USB charging cable to the charging port on the bottom of your Mobile Charger, then connect the
USB side of the cable to an available USB port on your computer or USB wall adapter.
Mobile Charger
(actual style may vary)
Charging CableQuick Start Guide
1
iPod nano
7th Generation
How to Recharge the Mobile Charger
Connect the included micro USB cable via the micro USB port on the bottom of the Mobile
Charger. You can recharge the Mobile Charger using a computer USB port or by using your
Apple or third-party USB wall adapter. You can also recharge your Mobile Charger while it
is connected to your device. The Mobile Charger features built-in pass-through technology
and will always charge the device to full capacity before recharging itself.
How to Charge Your Device
Power on the Mobile Charger by sliding up the large on/o switch on the side. The LEDs
on the bottom will turn on to indicate that the Mobile Charger has been powered on.
Plug the Lightning connector into your device to begin charging. Once you are fi nished
charging your device, simply disconnect the Lightning connector and slide down the on/
o switch to power it o .
2
on/o switch
Checking the Battery Level
You can check the battery level of the Mobile Charger by powering it on and checking the
status of the LEDs on the bottom:
battery indicator LEDs
LED 1 Blinking: 0 - 10%
LED 1 Illuminated: 10 - 25%
LED 2 Illuminated: 25 - 50%
LED 3 Illuminated: 50 - 75%
LED 4 Illuminated: 75 - 100%

Especificaciones del producto

Marca: Case-mate
Categoría: powerbank
Modelo: CM031201

¿Necesitas ayuda?

Si necesitas ayuda con Case-mate CM031201 haz una pregunta a continuación y otros usuarios te responderán




powerbank Case-mate Manuales

powerbank Manuales

Últimos powerbank Manuales