Celestron Elements ThermoTorch 10 Manual de Usario

Celestron banco de energía Elements ThermoTorch 10

Lee a continuación 📖 el manual en español para Celestron Elements ThermoTorch 10 (2 páginas) en la categoría banco de energía. Esta guía fue útil para 11 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/2
1
2
3
4
5
6
7
8
Thank you for purchasing the ThermoTorch 10 3-in-1 Hand
Warmer, Flashlight and Power Bank! With a traditional tactical
flashlight design, it’s CNC aluminum housing is water resistant,
dust proof and drop tested. It has a built in hand warmer feature
that will provide up to 10 hours of scent free heat, a 300 lumen,
CREE ® 5W LED 3 mode flashlight and is capable of charging
your personal electronic devices, with its powerful 10000 mAh
rechargeable lithium ion battery. It is a must have for any serious
outdoor enthusiast!
WARNING: Read all instructions and warnings thoroughly before
using the ThermoTorch 10. Improper use of this product
may result in product damage, excess heat, toxic
fumes, fire or explosion. Not intended for children.
INCLUDED IN THE BOX ARE:
1 - ThermoTorch 10
1 - USB Cable
1 - Rugged canvas holster with belt loop
PARTS CALLOUT:
1. Flashlight with CREE® 300 lumen LED
2. Power Button with Hand warmer LED indicator
3. Main Heating surface/handle
4. End cap
5. Battery indicator LEDs (4)
6. Mini USB “IN” port
7. USB “OUT” port 1: (standard 2.0) 5V - 2.1A
8. USB “OUT” port 2: (standard 2.0) 5V - 1A
1. CHARGING THE INTERNAL LITHIUM
ION BATTERY
Your ThermoTorch 10 has an internal, 10000 mAh rechargeable lithium
ion battery, which allows for up to 12 hours of continuous use at
a constant temperature of up to 45° Celsius (113° Fahrenheit).
The ThermoTorch 10 ships with a partial charge, but you
should charge it completely before using it for the first time.
STEPS
1. Unscrew the End cap (4) to expose the USB ports (the cap
will stay tethered to the main housing via nylon cord).
2. Plug the standard USB plug end of the included USB cable into
a USB port on a PC, laptop, car charger or USB 5V 2.1A Max
adapter plug.
3. Plug the mini USB end of the included USB cable into the “IN”
port (6) on your ThermoTorch 10.
4. Once plugged in, the blue LEDs (5) will start blinking indicating
a charge is in progress.
5. Charging is complete when all 4 blue LEDs (5) stop blinking.
2. USING THE FLASHLIGHT
Press and release the power button (2) to turn on the flashlight.
The flashlight has 3 modes: Low, Medium and High.
Each press and release of the power button will toggle through
the modes and then power the flashlight off.
3. USING THE HAND WARMER FEATURE
Press and hold the power button (2) until the button illuminates blue.
This indicates the Hand warmer is in use and the Main heating
surface (3) will begin to heat up. In minutes, it will reach its
maximum temperature.
Press and hold the power button (2) to turn off the hand warmer.
NOTE: To maintain water resistance, the end cap (4) must be
secured tight. Bear this in mind when checking battery
indicator LEDs (5).
4. CHARGING AN EXTERNAL DEVICE
Simply plug your device’s USB 2.0 plug into one of the standard
USB “OUT” ports (7 or 8)) on the ThermoTorch 10 while the other
end of your charging cable is connected to your smartphone, tablet,
camera or MP3 player.
The internal battery will automatically start charging your device.
NOTE: You may charge 2 devices at one time- by plugging into
each of the USBOUT” ports.
NOTE: USB OUT Port 1 (7) is rated at 5v-2.1A out, which is designed
to work best with tablets.
The battery indicator LEDs (5) will display the battery power
while you charge (1 LED- 25%, 2 LEDs- 50%, 3 LEDs- 75%,
4 LEDs- 100%)
5. SPECIFICATIONS
BATTERY: Rechargeable lithium ion battery10000 mAh
INPUT: Mini USB Connector / 5V 1.8A Max
HAND WARMER CONTINUOUS USE TIME: Up to 10 hours
continuous use (based on fully charged battery)
HAND WARMER TEMPERATURE RANGE:
UP TO 4 C (113° F)
IP-65 RATED: Complete dust protection (6) Water resistant (5)
FLASHLIGHT FEATURE: CREE®
XLAMP® XP-G2- 5W
3 MODES
1. LOW: 60 lumens
2. MED: 100 lumens
3. HIGH: 300 lumens
C-LINK FEATURE: Compatible with other Celestron Elements
power banks for extending heat time and recharging the
internal battery
OUTPUT: 2 Standard 2.0 USB ports (Smart Charge Technology):
1. 5V - 2.1A
2. 5V - 1A
AUTO-CHARGE FEATURE: Plug into either USBOUT” port and
ThermoCharge will automatically start charging your electronic device.
LED STATUS INDICATORS:
(4) Blue- Battery indicator LEDs
(1) Blue- Hand warmer indicator (power button)
OPERATING TEMPERATURE RANGE:
to 4Celsius (32° to 11Fahrenheit)
STORAGE TEMPERATURE RANGE:
68° to 77° Fahrenheit (optimal)
ACCESSORIES: Rugged canvas holster with belt loop
WEIGHT: 17.14 oz. (486 grams)
DIMENSIONS: 8.2 in x 2.0 in x 2.0 in
(208.3mm x 52.5 mm x 52.5 mm)
POWER DELIVERY CHART:
Smartphone (2100 mAh): 4 charges
Tablet (8200 mAh): 1 charge
MP3 Player (1100 mAh): 7 charges
Sports CAM (1100 mAh): 7 charges
______________________________________
WARNINGS:
Read all instructions and warnings prior to using this product.
Improper use of this product may result in product damage,
excess heat, toxic fumes, fire or explosion, for which damages
you (“Purchaser), and not Smart Team or Celestron (collectively
“Manufacturer”) are responsible.
Do not store battery in high temperature environment, including
intense sunlight.
Do not place battery in fire or other excessively hot environments.
Model # 94553
Be cautious of excessive drops, bumps, abrasions or other
impacts to this battery. If there is any damage to the battery
such as dents, punctures, tears, deformities or corrosion, due
to any cause, discontinue use and contact manufacturer or
dispose of it in an appropriate manner at your local battery
recycling center.
Do not disassemble this battery or attempt to repair or modify
it in any manner.
Do not expose this battery to moisture or submerge it in liquid.
Do not attempt to charge battery using any method, apparatus
or connection other than the device’s USB connector. For
questions or instructions for the various ways to charge the
Model #94553 3-in-1 Hand Warmer, Flashlight and Power
Bank, refer to this manual.
Do not attempt to replace any part of this battery.
This battery is intended for adult use only. If this battery
is intended by Purchaser to be used by a minor, purchasing
adult agrees to provide detailed instructions and warnings to
any minor prior to use. Failure to do so is sole responsibility
of Purchaser, who agrees to indemnify Manufacturer for any
unintended use/misuse by a minor.
If you find that your battery is excessively hot, is emitting odor,
is deformed, abrased, cut or is experiencing or demonstrating
an abnormal phenomenon, immediately stop all battery use and
contact Manufacturer.
For extended storage, first charge your battery for at least one hour.
It is not recommended to store device for more than 3 months
without use as batteries may have a tendency to discharge.
Never dispose of batteries in the garbage. Disposal of batteries
in the garbage is unlawful, in The United States, under state
and federal environmental laws and regulations. Always take
used batteries to your local battery-recycling center.
DISCLAIMER:
Manufacturer shall not in any way be liable to you or to any third
party for any damages you or any third party may suffer as a
result of use, intended or unintended, or misuse of this battery.
Manufacturer will not be responsible for any damages you or
any third party may suffer as a result of misuse of this battery
as outlined above. If you are responsible for battery use with an
unintended mobile device and damages result from such use, you
agree to indemnify Manufacturer for any resulting injuries to any
third party or parties.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which
can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference
by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and
receiver.
3. Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
4. Consult the dealer or an experienced technician for help.
CAUTION : To comply with the limits of the Class B digital device,
pursuant to Part 15 of the FCC Rules, this device is
comply with Class B limits. All peripherals must be
shielded and grounded. Operation with non-certified
peripherals or non-shielded cables may results in
interference to radio or reception.
MODIFICATION: Any changes or modifications not expressly
approved by the grantee of this device could
void the user’s authority to operate the device.
Torrance, CA 90503
TEL (800) 421-9649 | celestron.com
Copyright 2015 Celestron | All rights reserved.
(Products or instructions may change without
notice or obligation.)
Designed and intended for those 14 years of age
and older.
V2.0

Especificaciones del producto

Marca: Celestron
Categoría: banco de energía
Modelo: Elements ThermoTorch 10

¿Necesitas ayuda?

Si necesitas ayuda con Celestron Elements ThermoTorch 10 haz una pregunta a continuación y otros usuarios te responderán




banco de energía Celestron Manuales

banco de energía Manuales

Últimos banco de energía Manuales