Chauvet Ovation FD-105WW Manual de Usario

Chauvet cámara réflex Ovation FD-105WW

Lee a continuación 📖 el manual en español para Chauvet Ovation FD-105WW (20 páginas) en la categoría cámara réflex. Esta guía fue útil para 11 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/20

Quick Reference Guide

English EN

Español ES

Français FR

Nederlands NL

QUICK REFERENCE GUIDE

Ovation FD-105WW QRG Rev. 1

About This Guide

The Ovation FD-105WW Quick Reference Guide (QRG) has basic product information such as connection, mounting,

menu options, and DMX values. Download the User Manual from www.chauvetprofessional.com for more details.

Disclaimer

The information and specifications contained in this QRG are subject to change without notice.

Safety Notes

• DO NOT open this product. It contains no user-serviceable parts.

• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the

product from power via breaker or by unplugging it.

• DO NOT look at the light source when the product is on.

• CAUTION: This product’s housing may be hot when lights are operating.

• Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.

• DO NOT operate this product outdoors or in any location where dust, excessive heat, water, or humidity may affect

it. (IP20)

• DO NOT leave any flammable material within 50 cm of this product while operating or connected to power.

• CAUTION: When transferring product from extreme temperature environments, (e.g., cold truck to warm humid

ballroom) condensation may form on the internal electronics of the product. To avoid causing a failure, allow

product to fully acclimate to the surrounding environment before connecting it to power.

• USE a safety cable when mounting this product overhead.

• DO NOT operate this product if the housing, lenses, or cables appear damaged.

• ONLY connect this product to a grounded and protected circuit.

• ONLY use the hanging/mounting bracket to carry this product.

• In the event of a serious operating problem, stop using immediately.

• The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at higher temperatures.

Contact

Outside the U.S., United Kingdom, Ireland, Mexico, or Benelux, contact your distributor to request support or return a

product. From inside the U.S., UK, Ireland, Mexico, or Benelux, use the information in Contact Us at the end of this QRG.

What is Included

• Ovation FD-105WW

• Neutrik® powerCON® power cord

• Gel Frame (6.25 in/159mm accessories)

• Warranty Card

• Quick Reference Guide

AC Power

This product has a switchable power supply that can work with an input voltage range of 100–240 VAC, 50/60 Hz.

Power Linking

You can link up to 14 Ovation FD-105WW products at 120 VAC or 25 at 230 VAC. Never exceed this number. Power

linking cords can be purchased separately.

Dimmer Control

The Ovation FD-105WW may be plugged into and controlled using a regular dimmer. In this mode, the product reacts

exactly like an incandescent product. See the User Manual to configure Dimmer Control operation.

AC Plug

Replacing The Fuse

1. Disconnect this product from power.

2. Using a Phillips #2 head screwdriver, unscrew the fuse holder cap from the housing.

3. Remove blown fuse and replace with a good fuse of the same type and rating.

4. Screw the fuse holder cap back in place and reconnect power.

Connection Wire (U.S.) Wire (Europe) Screw Color

AC Live Black Brown Yellow/Brass

AC Neutral White Blue Silver

AC Ground Green/Yellow Green/Yellow Green

• To eliminate unnecessary wear and improve its lifespan, during periods of non-use

completely disconnect the product from power via breaker or by unplugging it.

Ovation FD-105WW QRG Rev. 1

QUICK REFERENCE GUIDE

DMX Linking

The Ovation FD-105WW will work with a DMX controller using a 3-pin or 5-pin DMX serial connection. A DMX Primer is

available from www.chauvetprofessional.com.

DMX Connection

The Ovation FD-105WW uses a 3-pin or 5-pin DMX for its DMX personalities: 1: UNO, 2: DOS, or 3:STD.P. See the User

Manual for information about connecting and configuring the product for DMX operation.

Master/Slave Connection

The Ovation FD-105WW uses the DMX data connection for its Master/Slave mode. See the User Manual for information

about how to connect and configure the product for master/slave operation.

RDM (Remote Device Management)

Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate bi-directionally

along existing DMX cabling. The Ovation FD-105WW supports RDM protocol that allows feedback to monitor

temperature and changes to DMX Address, , DMX Personality Dimmer Mode, and LED Frequency menu options.

Download the User Manual from www.chauvetprofessional.com for more details.

Dimmer Control

The Ovation FD-105WW may be plugged into and controlled using a regular dimmer. In this mode, the product reacts

exactly like an incandescent product. See the User Manual to configure Dimmer Control operation.

Mounting

Before mounting this product, read the Safety Notes. Use at least one mounting point per product. Make sure the

mounting clamps are capable of supporting the weight of the product. For our Chauvet line of mounting clamps, go to

http://trusst.com/productcategory/truss-clamps/

Product Mounting Diagram

Passcode

After being prompted, enter the following passcode: < >, < >, < >, <UP DOWN UP>, <DOWN ENTER>. This

passcode cannot be changed and must be used whenever prompted.

Mounting Clamp

Overhead Mounting

Safety Cable

Mounting Bracket

Especificaciones del producto

Marca:	Chauvet
Categoría:	cámara réflex
Modelo:	Ovation FD-105WW
Color del producto:	Zwart
Peso.:	1100 g
Diámetro:	98.4 mm
Rango focal:	15 - 30 mm
Longitud:	142.5 mm
Distancia de enfoque más cercana:	0.28 m
Número de apertura máxima:	2.8
Tamaño del filtro:	- mm
Tapa de la lente:	Ja
Marcas de cámaras compatibles:	Nikon
resorte de lente:	Kroonvormige lenskap
Resistente a vibraciones:	Ja