EMOS E6018 Manual de Usario

EMOS Estación meteorológica E6018

Lee a continuación 📖 el manual en español para EMOS E6018 (76 páginas) en la categoría Estación meteorológica. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/76

2606162000_31-E6018_00_01_WEB 105 × 148 mm

E6018

GB Wireless Weather Station

CZ Bezdrátová meteostanice

SK Bezdrôtová meteostanica

PL Bezprzewodowa stacja meteorologiczna

HU Vezeték nélküli meteorológiai állomás

SI Brezžična meteorološka postaja

RS|HR|BA|ME Bežična meteorološka stanica

DE Drahtlose Wetterstation

UA Бездротовий метеорологічний пристрій

RO|MD Staţie meteorologică fără r

LT Belaidė meteorologinė stotelė

LV Bezvadu meteoroloģiskā stacija

EE Juhtmevaba ilmajaam

BG Безжична метеорологична станция

FR Station météo sans l

IT Stazione Metereologica Wireless

ES Estación meteorológica inalámbrica

NL Draadloos weerstation

www.emos.eu

wireless sensor: transmission frequency 433 MHz, 10 mW e.r.p. max.

station power supply: 3× 1.5 V AAA batteries (not included)

adapter AC 230 V/DC 5 V, 300 mA (included)

sensor power supply: 2× 1.5 V AAA (not included)

station dimensions and weight: 17 × 192 × 127 mm, 364 g

sensor dimensions and weight: 15 × 62 × 100 mm, 54 g

Getting Started

1. Connect the adapter to the station, then insert batteries rst into the weather station (3× 1.5 V

AAA), then into the wireless sensor (2× 1.5 V AAA). The battery compartment of the sensor is

protected by screws; use a suitable screwdriver.

2. When inserting the batteries make sure the polarity is correct to avoid damaging the weather

station or sensor. Only use alkaline batteries of the same type; do not use rechargeable batteries.

3. Place the two units next to each other. The weather station will automatically detect the sensor

signal within 3 minutes. If signal from the sensor is not detected, long-press the button on

the weather station to repeat the search.

4. We recommend placing the sensor on the north side of the house. The range of the sensor may

decrease substantially in areas with large number of obstacles.

5. The sensor is resistant to dripping water; however, it should not be exposed to sustained rain.

6. Do not place the sensor onto metal objects as this will reduce its transmission range.

7. If the low battery icon is displayed, replace batteries in the sensor or weather station.

Switching Channel and Connecting Additional Sensors

1. Choose the desired channel 1, 2, or 3 for the sensor by repeatedly pressing the button. Then,

long-press the button; the icon will start ashing.

2. Unscrew the cover from the battery compartment on the rear of the sensor and set the sensor

switch to the desired sensor channel number (1, 2, 3), then insert batteries (2× 1.5 V AAA). Data

from the sensor will be loaded within 3 minutes.

3. If sensor signal is not found, remove the batteries and proceed again in accordance with steps

1 and 2 or press the TX button.

Displaying Data from Multiple Sensors, Automatic Cycling through Values from

Connected Sensors

Press the button repeatedly to display data from all connected sensors on the weather station,

one by one.

You can also activate cycling through data from all connected sensors:

1. turning on cycling

Repeatedly press the button until the display shows the icon.

Data from all 3 sensors will be shown automatically and repeatedly one after another.

2. turning o cycling

Repeatedly press the button until the icon disappears.

Radio Controlled Clock (DCF77)

The wireless sensor will automatically start searching for DCF77 (hereinafter referred to as DCF)

signal for 5 minutes after pairing with the weather station; the icon is ashing. (The DCF sensor

is located in the sensor).

Signal detected – the icon stops ashing and displays the current time with the DCF icon .

Signal not detected – DCF icon will not be displayed. DCF signal will be synchronised daily between

2:00 and 3:00 am.

Note: If the weather station detects DCF signal but the current time on the display is incorrect (e.g.

shifted ±1 hour), you must always set the correct time zone for the country where you are using the

station, see Manual Settings.

In standard conditions (at safe distance from sources of interference, such as TV sets or computer

monitors), the reception of time signal takes several minutes. If the weather station does not detect

the signal, follow these steps:

Temperature limit ranges

Outdoor Indoor

Minimum -50°C to +10°C 0°C–23°C

Maximum 28°C to +70°C 26°C–50°C

Resolution 0.5°C 0.5°C

While on the main screen, repeatedly press the button to switch to sensor 1, 2 or 3 and proceed for

each sensor as follows.

1. Short-press the button four times.

2. Press the button for 3 seconds and set the minimum outdoor temperature.

3. Short-press the button and activate (ON)/deactivate (OFF) the outdoor minimum temperature alert.

4. Short-press the button and set the minimum outdoor temperature.

5. Short-press the button and activate (ON)/deactivate (OFF) the outdoor maximum temperature alert.

6. Short-press the button and set the minimum indoor temperature.

7. Short-press the button and activate (ON)/deactivate (OFF) the indoor minimum temperature alert.

8. Short-press the button and set the minimum indoor temperature.

9. Short-press the button and activate (ON)/deactivate (OFF) the indoor maximum temperature alert.

When the set temperature limit is exceeded, an audio alarm will sound for 1 minute and the value

will begin ashing.

Pressing any button on the screen cancels the alert sound, but the symbol of an active alert will con-

tinue ashing. Once temperature drops below the set limit, the symbol on the screen will stop ashing.

Temperature, Humidity and Pressure Trends

falling constant rising

Moon phases

1 2 3 4 5 6 7 8

1 2 – New moon; – Waxing crescent; – First quarter; – Waxing gibbous; – Full moon; 3 4 5 6 – Waning

gibbous; – Last quarter; – Waning crescent7 8

Note: In the period between 18:00 and 06:00, the moon icon will be surrounded by stars.

Displaying Maximum and Minimum Readings of Temperature and Humidity

Press the button repeatedly to gradually display the maximum and minimum temperature and

humidity values measured.

The memory of measured values is automatically erased every day at 00:00.

Or long-press the button to erase the memory automatically.

Station Display Backlight

When powered via adapter:

Permanent backlighting is set automatically.

Repeatedly pressing the SNOOZE/LIGHT button will allow you to set 4 dierent levels of permanent

backlighting (o, maximum, medium, low).

When powered only by 3× 1.5 V AAA batteries:

Display backlighting is o. Pressing the SNOOZE/LIGHT button will turn the display backlight on for

5 seconds, then it turns o again. When the station is only powered by batteries, permanent back-

lighting of the display cannot be activated!

Especificaciones del producto

Marca:	EMOS
Categoría:	Estación meteorológica
Modelo:	E6018
Color del producto:	Wit
Peso.:	730 g
Clase de eficiencia energética (antigua):	A+
Material de la carcasa:	Staal
Número de lámparas:	3 gloeilamp(en)
Lámpara de encendido:	5 W
Código de seguridad internacional (IP):	IP20
Diámetro:	87 mm
Forma:	Rond
Material:	Staal
Longitud:	115 mm
Tipo de ajuste/pie:	GU10
Flujo-luminoso:	400 lm
Vida útil de la lámpara:	25000 uur
luz de color:	Warm wit
Temperatura del color:	3000 K
clase de protección:	II
voltaje-de-entrada-de-CA:	220-240 V
Frecuencia-de-entrada-de-CA:	50 - 60 Hz
Consumo de energía (1000 horas):	5 kWu