EMOS H2017 Manual de Usario

Lee a continuación 📖 el manual en español para EMOS H2017 (18 páginas) en la categoría sistema de intercomunicación. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/18
3010002017_31-H2017_00_01 148 × 210 mm zdroj: 3010002017_31-H2017_00_01.indd
www.emos.eu
EM-07HD (H2017/H2018)
GB Colour Video Doorphone Set
CZ Sada barevného videotelefonu
SK Sada farebného videotelefónu
PL Zestaw wideodomofonowy
HU Színes képernyős videotelefon-készlet
SI Set barvnega videotelefona
RS|HR|BA|ME Komplet videotelefona u boji
DE Farbvideotelefon-Set
UA Комплект кольорового відеодомофону
RO|MD Set videotelefon color
LT Spalvinio vaizdo telefono komplektas
LV Krāsu videotālruņa komplekts
EE Värvivideofoni komplekt
BG Комплект цветен видеодомофон
2
1
140–170 cm
40 cm
4
Installation
Choosing a Place for Installing the Monitor
Take into account the need for cables when choosing a place to install the device. It is recommended that the device be
placed at eye level of the user.
Installation of Assembly Frame under Videomonitor
Place the frame on the mounting spot, mark out the locations for mounting holes and drill them into the wall. Sucient space
must remain in the centre of the mount for cables to the monitor (cable from the camera, cable from the power supply).
Attach the frame using screws; you can also add wall plugs.
Connecting the Cables
Connect the door camera unit to the monitor by plugging the cable into the prescribed terminals on both devices.
Hanging the Monitor
Gently press the monitor to the frame so that the protrusions lock into the opening at the rear of the monitor. Pushing the
monitor slightly downwards will x it in place.
Connecting the Device to the Power Grid
Connect the power supply to a network which meets the 230 V/50 Hz parameters of the device.
Plug the power supply connector (output) into the prescribed socket at the rear of the videomonitor.
Video-doorkeeper Connection Diagram
Terminal description:
1. Audio – white
2. GND – black
3. Video – yellow
4. 12 V power supply – red
Installation of the Door Camera Unit
Choose a suitable place for mounting and attach the hood.
Pull the power supply cable through the mounting opening and connect it to the terminal at the rear of the door camera unit.
Attach the connected door camera unit to the covering hood using the enclosed screws.
Door Camera Unit on Plaster
Apply a layer of silicone between the wall and covering hood tol prevent humidity from entering under the door camera unit.
The silicone should be applied on the top and the sides. The bottom side must be left open to allow humid air from exiting
the space under the door camera unit.
Parameters of Interlinking Cables
For distances under 20 m, use a quality UTP CAT.5 cable (optimally CAT.6). For distances over 20 m, we recommend a SYKFY
5 × 2 × 0.5 or 10 × 2 × 0.5 cable. To achieve higher diameter, cables can be doubled or tripled.
The resulting diameter of the conductors is as shown in the table:
Conductor core diameter [mm] Distance [m]
0.5 20
0.65 50
0.8 70
1 115
In basic implementation, there is no need to use a coaxial cable to transmit the video component.
Such a cable is only recommended for distances over 100 m.
For long ground cabling, you can use a telecommunication cable of category TCEPKPFLE.

Especificaciones del producto

Marca: EMOS
Categoría: sistema de intercomunicación
Modelo: H2017

¿Necesitas ayuda?

Si necesitas ayuda con EMOS H2017 haz una pregunta a continuación y otros usuarios te responderán




sistema de intercomunicación EMOS Manuales

sistema de intercomunicación Manuales

Últimos sistema de intercomunicación Manuales