EMOS H4031 Manual de Usario

EMOS sistema de intercomunicación H4031

Lee a continuación 📖 el manual en español para EMOS H4031 (16 páginas) en la categoría sistema de intercomunicación. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/16

3010040310_31-H4031_00_01_WEB 140 × 160 mm

www.emos.eu

H4031

GB IP Door Camera Unit

CZ IP dveřní kamerová jednotka

SK IP dverová kamerová jednotka

PL IP jednostka z kamerą do drzwi

HU IP Videotelefon kameraegység

SI Zunanja IP kamera

RS|HR|BA|ME IP kamera za vrata

DE IP-Türkamera-Einheit

UA Блок дверної IP-камери

RO|MD Cameră video de ușă IP

LT IP durų kameros blokas

LV IP durvju kameras komplekts

EE IP-uksekaamera üksus

BG IP външно тяло с камера

FR Caméra de porte IP

IT IP Unità della telecamera per porta

ES Unidad de cámara IP para puerta

NL IP Deurcamera-unit

AndroidiOS

iOSiPad Android

2.4 GHz 5 GHz

DC 12 V AC 100–240 V

50 Hz/60 Hz

Electric lock

Power supply

for unlocking

GB | IP Door Camera Unit

Package contents:

Wi-Fi doorbell

Cover (rain hood)

Wireless chime

Power supply

Connecting cable

Mounting material – screws

Manual

Technical specications

Wi-Fi doorbell

Power supply: 12 V DC

Resolution: 1 920 × 1 080

Lens: 2.69 mm JX-F37

Lens angle: 110°

PIR range: up to 4 m

Storage: SD card (max. 64 Gb), Cloud storage

Enclosure rating: IP44

Maximum number of users: 10

APP: EMOS GoSmart for Android and iOS

Connection: 2.4 GHz WIFI (IEEE802.11b/g/n)

Wireless chime

Power supply: 3× AA (LR6) 4.5 V DC

Frequency: 433.92 MHz ±250 kHz

Range: ca. 80 m (open space)

Description of the device: g. 1a

A – Microphone

B – PIR sensor

C – Photoresistor

D – Lens

E – Status LED

• LED ashing red and green: Battery charging.

• LED ashing red: Waiting for network conguration.

• LED ashing green: Conguring network.

• LED glowing green: Working correctly.

• LED glowing yellow: Powered from an external

source, charging complete, no batteries detected

(note: If no batteries are inserted, the indicator

only glows yellow).

• LED not glowing red and green: Weak power supply

in standby mode.

F – Ring button

Description of the device: g. 1b

A – RESET button

B – SD card slot

C – USB port

D – Power supply

E – Input – door lock control

F – Alarm sensor

G – Battery slot

Description of the device: g. 1c

A – Status LED

• LED ashing red: Working correctly.

• LED glowing red: Voltage dropped below 3.3 V.

B – Speaker

C – Operating mode

D – Ringtone selection

E – Ringtone volume

• Low

• Medium

• High

Installation: g. 2

1. Mount the cover (rain hood) of the doorbell onto a

wall using the enclosed screws.

2. The mounting height of the doorbell from the ground

should be 1 400–1 600 mm.

3. Make sure the PIR sensor is protected from direct

sunlight.

4. Connect the power supply to the input of the doorbell

according to the diagram.

5. Mount the doorbell using the screw on the underside

according to the diagram.

Pairing the wireless chime with the Wi-Fi

doorbell: g. 3

• Press and hold the button for 3 seconds until you

hear a „ding-dong“ sound.

• Then, press the ring button on the Wi-Fi doorbell.

The unit will make a sound and glow blue, indicating

successful pairing.

Unpairing the wireless chime from the Wi-Fi

doorbell:

• Press and hold the button for 5 seconds until you

hear a double „ding-dong“ sound.

• The devices are now unpaired.

Connecting the system: g. 4

The device only provides a volt-free contact for controlling

the electric door lock. Therefore, the device requires an

external power source to function properly.

Especificaciones del producto

Marca:	EMOS
Categoría:	sistema de intercomunicación
Modelo:	H4031
Peso.:	24040 g
Ancho:	2108.2 mm
Profundidad:	355.6 mm
Altura:	1828.8 mm
Color del marco:	Roestvrijstaal
Material del marco:	Metaal
Ancho cuando está plegado:	1473.2 mm
Tipo-producto:	Kledingrek