Finder 7M.38.8.400.0312 Manual de Usario

Finder Equipo de medición 7M.38.8.400.0312

Lee a continuación 📖 el manual en español para Finder 7M.38.8.400.0312 (60 páginas) en la categoría Equipo de medición. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/60
USER’S MANUAL 7M
SERIES OF THREE-PHASE METERS 7M.38.8.400.XXXX:
7M.38.8.400.0112
7M.38.8.400.0212
7M.38.8.400.0312
Users Manual 7M 1
THREE-PHASE ELECTRICAL ENERGY METER
USER AND INSTALLATION MANUAL
Users Manual 7M 2
SECURITY ADVICES AND WARNINGS
Please read this chapter carefully and examine the equipment carefully for potential damages which might arise during
transport and to become familiar with it before continue to install, energize and work with a three-phase energy meter
7M.38.8.400.xxxx.
This chapter deals with important information and warnings that should be considered for safe installation and handling
with a device in order to assure its correct use and continuous operation.
Everyone using the product should become familiar with the contents of chapter »Security Advices and Warnings«.
If equipment is used in a manner not specied by the manufacturer, the protection provided by the equipment may be
impaired.
PLEASE NOTE
This booklet contains instructions for installation and use of three-phase energy meter 7M.38.8.400.xxxx.
Installation and use of a device also includes handling with dangerous currents and voltages therefore should be installed,
operated, serviced and maintained by qualied personnel only. FINDER S.p.A assumes no responsibility in connection with
installation and use of the product.
If there is any doubt regarding installation and use of the system in which the device is used for measuring or supervision,
please contact a person who is responsible for installation of such system.
BEFORE SWITCHING THE DEVICE ON
Check the following before switching on the device:
Nominal voltage
Terminals integrity
Protection fuse for voltage inputs (recommended maximal external fuse size is 80 A)
External switch or circuit breaker must be included in the installation for disconnection of the devices’ power supply.
It must be suitably located and properly marked for reliable disconnection of the device when needed
Proper connection and voltage level of I/O module

Especificaciones del producto

Marca: Finder
Categoría: Equipo de medición
Modelo: 7M.38.8.400.0312

¿Necesitas ayuda?

Si necesitas ayuda con Finder 7M.38.8.400.0312 haz una pregunta a continuación y otros usuarios te responderán




Equipo de medición Finder Manuales

Equipo de medición Manuales

Últimos Equipo de medición Manuales