JBL MS-BassPro SQ Manual de Usario

JBL Altavoz de subgraves MS-BassPro SQ

Lee a continuación 📖 el manual en español para JBL MS-BassPro SQ (10 páginas) en la categoría Altavoz de subgraves. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/10
OWNER’S MANUAL
MS-BassPro SQ
powered automotive subwoofer
2
IntrOductIOn
Thank you for choosing the JBL® MS-BassPro SQ powered automotive
subwoofer. The MS-BassPro SQ has been designed to deliver outstanding
bass performance from a compact, easily installed powered subwoofer
enclosure.
To get the best performance from your MS-BassPro SQ, we strongly
recommend that installation be entrusted to a qualified professional.
Although these instructions explain how to install the MS-BassPro SQ in
a general sense, they do not show specific installation methods that may
be required for your particular vehicle. If you do not have the necessary
tools or experience, do not attempt the installation yourself. Instead,
please ask your authorized JBL car audio dealer about professional
installation.
In order that we may better serve you should you require warranty
service, please retain your original sales receipt and register your
MS-BassPro SQ online at www.jbl.com.
Included IteMs
InstallIng the suBwOOfer
InstallatIon WarnIngs and tIps
• Always wear protective eyewear when using tools.
• Disconnect the vehicle’s negative (–) battery terminal before starting
the installation.
• Check clearances on both sides of a planned mounting surface. Be
sure that screws or wires will not puncture brake lines, fuel lines or
wiring harnesses, and that wire routing will not interfere with the safe
operation of the vehicle.
• When making electrical connections, make sure they are secure and
properly insulated.
• I f you must replace the MS-BassPro SQ’s fuse, be sure to use the same
type of fuse and current rating as that of the original.
MountIng the subWoofer
Choose a location for the subwoofer that doesn’t interfere with cargo,
a fold-down rear seat or the trunk lid. The best location is usually a
corner of the trunk or cargo area, as shown in the illustrations. These
locations, in addition to being out of the way, will provide the best sonic
reproduction in the 60Hz to 100Hz range because the woofer output
will be “corner loaded” against the vehicle’s walls. In any case, the
MS-Basspro SQ must not interfere with the safe operation of the vehicle.
3
www.jbl.com
English
cOnnectIOns
IMPORTANT: Disconnect the vehicle’s negative (–) battery terminal
before beginning installation.
AUDIO SENSE SWITCH:
No remote turn on connection is necessary because the MS-BassPro SQ
includes signal sensing turn on, which will turn the subwoofer on when
it receives an audio signal at its input connectors. The subwoofer will
automatically turn off approximately five minutes after the input signal
ceases.
If your audio system’s source unit includes a remote turn on wire and you
would prefer to use it, defeat the signal sensing turn on circuit by moving
the Audio Sense switch to the “off” position.
CONNECTING THE SUBWOOFER TO YOUR VEHICLE’S AUDIO
SYSTEM
The JBL MS-BassPro SQ is equipped with two line-level (RCA) input
connectors that can handle line-level and speaker-level input signals. Use
RCA audio cables to connect the subwoofer to source units with preamp-
level outputs; use the supplied bare wire-to-RCA adapters to connect the
subwoofer to source units that don’t have RCA output connectors. Consult
the following system application diagrams to help you plan the installation
of your MS-BassPro SQ. For additional installation suggestions, contact
your local authorized JBL car audio dealer.
If your car audio system’s head unit has front or rear stereo line-
level outputs:
Use a stereo RCA audio cable (not supplied) to connect the MS-BassPro
SQ to the head unit’s front or rear left and right line-level outputs.
L. Front
Speaker
L. Rear
Speaker Audio System
Head Unit Left/Right
Line-Level
Outputs
Stereo RCA Audio Cable
(not supplied)
R. Front
Speaker
R. Rear
Speaker

Especificaciones del producto

Marca: JBL
Categoría: Altavoz de subgraves
Modelo: MS-BassPro SQ

¿Necesitas ayuda?

Si necesitas ayuda con JBL MS-BassPro SQ haz una pregunta a continuación y otros usuarios te responderán


Altavoz de subgraves JBL Manuales

JBL

JBL ES250PWBK/230 Manual de Usario

6 Octubre 2024
JBL

JBL SW10 Manual de Usario

30 Septiembre 2024
JBL

JBL Club Marine MS10LW Manual de Usario

22 Septiembre 2024
JBL

JBL Stage 220P Manual de Usario

18 Septiembre 2024
JBL

JBL Club 122SL Manual de Usario

16 Septiembre 2024
JBL

JBL Club 102SL Manual de Usario

16 Septiembre 2024
JBL

JBL CVL18S Manual de Usario

15 Septiembre 2024
JBL

JBL EON718S Manual de Usario

15 Septiembre 2024
JBL

JBL Stage 82AM Manual de Usario

15 Septiembre 2024
JBL

JBL SUB80P Manual de Usario

12 Septiembre 2024

Altavoz de subgraves Manuales

Últimos Altavoz de subgraves Manuales

Canton

Canton SUB 8.2 Manual de Usario

27 Octubre 2024
Deaf Bonce

Deaf Bonce Machete MFX30D2 Manual de Usario

26 Octubre 2024
Phoenix Gold

Phoenix Gold ZP12D4 Manual de Usario

21 Octubre 2024
Phoenix Gold

Phoenix Gold ZP12D2 Manual de Usario

21 Octubre 2024
Phoenix Gold

Phoenix Gold Z12AB Manual de Usario

21 Octubre 2024
Phoenix Gold

Phoenix Gold Z10AB Manual de Usario

21 Octubre 2024
Phoenix Gold

Phoenix Gold ZB8P Manual de Usario

21 Octubre 2024
Bowers And Wilkins

Bowers And Wilkins CT 8SW Manual de Usario

20 Octubre 2024
Pioneer

Pioneer TS-W257D2 Manual de Usario

17 Octubre 2024
Vonyx

Vonyx SWP15 Manual de Usario

17 Octubre 2024