JBL SUB80P Manual de Usario

JBL Altavoz de subgraves SUB80P

Lee a continuación 📖 el manual en español para JBL SUB80P (10 páginas) en la categoría Altavoz de subgraves. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/10

OWNER’S MANUAL

JBL SUB80P Wireless Subwoofer

JBL SUB80P

www.jbl.com/specialtyaudio

English

LIMITED WARRANTY

JBL loudspeakers are warranted against defects. The duration of a warranty depends on the laws in the country in which it was purchased.

Your local JBL retailer can help you determine the duration and coverage of your warranty.

For more information please visit: www.jbl.com/specialtyaudio.

Congratulations and Thank You for purchasing your new JBL SUB80P Wireless Subwoofer.

Please take the time to read the following installation and setup information in order to optimize the performance of your wireless subwoofer.

INTRODUCTION

THANK YOU FOR CHOOSING THIS JBL PRODUCT!

Your new JBL SUB80P 200-watt powered wireless subwoofer incorporates an 8" (200mm) down-firing cone transducer and a built-in, high-

performance, 200-watt amplifier that delivers the powerful, dynamic and accurate low-frequency performance that makes your film soundtracks

and music come alive. The subwoofer receives its audio signal from the transmitter module via wireless technology, so you can place it anywhere

in your room without having to run an audio cable. And to maximize connection flexibility, the subwoofer also features wired connections.

We’re confident that this JBL subwoofer will provide every note of enjoyment that you expect – and that when you think about purchasing

additional audio equipment, you will once again choose JBL products.

This owner’s manual contains all the information you need to set up, connect and adjust your new subwoofer. For more in-depth information, go to

our Web site: www.jbl.com/specialtyaudio.

INCLUDED ITEMS

Wireless Subwoofer Transmitter Module

Trigger Cable

LFE Cable

Transmitter Power Supply

Power Supply AC Cord

(varies with region)

TABLE OF CONTENTS

LIMITED WARRANTY ........................................................................................................................................................................................ 2

INTRODUCTION ............................................................................................................................................................................................... 2

INCLUDED ITEMS ............................................................................................................................................................................................ 2

SUBWOOFER REAR-PANEL CONTROLS .......................................................................................................................................................... 3

PLACING THE SUBWOOFER ............................................................................................................................................................................ 4

CONNECTING THE SUBWOOFER .................................................................................................................................................................... 5

OPERATING YOUR SUBWOOFER ..................................................................................................................................................................... 7

SPECIFICATIONS ............................................................................................................................................................................................. 8

English

SUBWOOFER REAR-PANEL CONTROLS

1 2

WIRELESS

CODE

DC 5V

INPUT

3 4

SUB80P

Phase Switch

Bass Boost Switch

Power On Mode

Switch

Subwoofer Level

Control

Input Mode Switch

External Trigger Input

Wireless Code Switch

Power Connector

TRANSMITTER UNIT REAR-PANEL

CONNECTIONS AND CONTROLS

Power Switch Power Cord

Wireless Code

Switch

Input

Connectors

Line-Level LFE In

Connector

Line-Level L /R In

Connector

SUBWOOFER UNIT

Phase switch: This switch determines whether the subwoofer transducer’s piston-like action moves in and out in phase with the satellite

speakers. If the subwoofer were to play out of phase with the satellite speakers, the sound waves from the satellites could cancel out some of the

subwoofer’s sound waves, reducing bass performance and sonic impact. This phenomenon depends in part on the placement of all the speakers

in the room. In most cases, the Phase switch should be left in the “Normal” position. However, it does no harm to experiment, and you can leave

the Phase switch in the position that maximizes bass response and impact.

Bass Boost switch: Set this switch to “On” to enhance the subwoofer’s low-frequency performance. Set this switch to “Off” for normal low-

frequency performance.

Power On Mode switch: When this switch is set in the “Auto” position and when the Power switch is set to “On”, the subwoofer will

automatically turn itself on when it receives an audio signal and will enter the standby mode after it has received no audio signal for about

15 minutes. When this switch is set in the “On” position, the subwoofer will remain on whether or not it is receiving an audio signal. An LED on the

subwoofer’s top panel indicates whether the subwoofer is in the on or standby state:

no matter what setting the Power On Mode switch is in.

Subwoofer Level control: Use this control to adjust the subwoofer’s volume. Turn clockwise to increase the volume; turn counterclockwise to

decrease the volume.

Input Mode switch: When this switch is in the “Normal” setting, the input signal from the Line-Level L/R In connectors and Transmitter Unit is

active with the internal low-pass crossover enabled. When this switch is in the “LFE” setting, the input signal from the Line-Level LFE In connector

and Transmitter Unit is active with the internal low-pass crossover bypassed.

External Trigger Input connector: Use the mini plug of the supplied combination LFE and trigger cable to connect the External Trigger Input

connector to the trigger output of another compatible component. Whenever the subwoofer detects a trigger signal between 3V and 30V (AC

or DC), its amplifier will turn on. The amplifier will turn off after the trigger signal ceases, even when the Power On Mode switch is in the “Auto”

position.

Line-Level LFE In connector: When you’re connecting the subwoofer to the dedicated subwoofer output of a receiver/processor that has its

own low-pass crossover network, use the Line-Level LFE In connector. You must also set the subwoofer’s Input Mode switch in the “LFE” position

to bypass the subwoofer’s internal low-pass crossover.

Especificaciones del producto

Marca:	JBL
Categoría:	Altavoz de subgraves
Modelo:	SUB80P
Peso.:	340 g
Altura:	63.5 mm
Tecnología de conectividad:	Bedraad
Diámetro:	203.2 mm
Energía promedio:	- W
Uso recomendado:	Overige
Impedancia:	45 Ohm
Canales de salida de audio:	1.0 kanalen
Colocación de los altavoces:	Plafond-montage
Rango de frecuencia:	- Hz