JL Audio 12W0v3 Manual de Usario

Lee a continuación 📖 el manual en español para JL Audio 12W0v3 (4 páginas) en la categoría Altavoz de subgraves. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/4
12WØv3-4
Subwoofers
o w n e r s m a n u a l
Congratulations on your purchase of a JL Audio subwoofer component. Your JL Audio subwoofer is a
precision loudspeaker which has been engineered to produce the highest quality sub-bass performance
in your vehicle. Authorized JL Audio dealers have extensive technical information for many different
applications of your new speaker. They also have the knowledge, skills and tools to build a high-quality
enclosure that will maximize the performance of your speaker. We highly recommend that you have your
enclosure built by an authorized JL Audio dealer.
Inside you will find specifications and two recommended enclosures for your speaker; one is a sealed
enclosure, the other is a ported design. Both types of enclosures will give you excellent sound quality and
low-frequency extension. The sealed enclosure is a better choice if space is extremely tight, but the ported
enclosure will produce 3dB more output at the same power if you have the extra space to work with.
2 JL AUDIO 12WØv3-4
SUBWOOFER 12WØv3-4
Free Air Resonance (Fs): 28.43 Hz
Electrical “Q” (Qes): 0.715
Mechanical “Q” (Qms): 10.709
Total Speaker “Q” 0.670(Qts):
Equivalent Compliance (Vas): 2.530 ft3
71.64 liters
One-way, Linear Excursion (Xmax)*: 0.45 in.
11.4 mm
Efficiency (1W/1m)**: 85.64 dB SPL
Effective Piston Area (Sd): 74.509 in2
0.0481 m2
DC Resistance (Re): 4.280 ohm
Nominal Impedance: 4 ohm
Power Handling (continuous): 300 W
* Xmax specifications are derived via one-way voice coil overhang method
with no correction factors applied.
** Efficiency (1W/1m) is an accurate indicator of a subwoofer’s output not
capability and should not be used as a comparison to other subwoofers
to determine which one is “louder !
A
BE
D
C
12WØv3 SUBWOOFER PHYSICAL
SPECIFICATIONS
Nominal Diameter: 12.0 in.
305 mm
Overall Diameter (A): 12.52 in.
318 mm
Mounting Hole Diameter (B): 11.0625 in.
281 mm
Bolt Hole Circle (C): 11.7 in.
297 mm
Magnet Diameter (D): 5.276 in
134 mm
Mounting Depth (E): 5.4 in.
137 mm
Net Weight: 8.11 lbs.
3.68 kg
Driver Displacement: 0.048 ft3
1.36 liters
JL AUDIO 12WØv3-4
U.S. PATENT: #6,219,431
JL AUDIO 12WØv3-4 3
SUBWOOFER RECOMMENDED SEALED ENCLOSURE
Volume
(net int.)
External Dimensions
( epth)Width x Height x D
F3
(Hz)
Fc
(Hz) Qtc
12WØv3-4 1.375 ft3
38.94 liters
16 in. x 19 in. x 11.75 in.
406 mm x 483 mm x 298 mm 36.0 47.91 1.179
All specifications are subject to change without notice.
SUBWOOFER RECOMMENDED PORTED ENCLOSURE
Volume
(net int.)
Enclosure External Dimensions
( epth)Width x Height x D
Round Port Specs
( nner I Diameter x Length)
Tune to:
(Hz)
F3
(Hz)
12WØv3-4 1.750 ft3
39.56 liters
17.5 in. x 14.75 in. x 16.25 in.
445 mm x 375 mm x 413 mm
3 in. x 14 in.
76.2 mm x 356 mm 26 30.8
! ! CAUTION ! !
Prolonged exposure to sound pressure levels in excess of 100dB can cause permanent hearing loss. This high-performance
speaker can exceed this level. Please exercise restraint in its operation in order to preserve your ability to enjoy its fidelity.
When installing a subwoofer in your vehicle, it is extremely important to secure the enclosure firmly. We recommend
bolting the enclosure through the metal of the floorpan or the frame of the vehicle with large diameter washers
for reinforcement. If an enclosure is not firmly attached, it can become a projectile in a collision. This is particularly
important in a hatchback, station wagon, sports utility vehicle, or van.
The enclosure recommendations listed are external
dimensions which assume the use of 3/4" (19mm)
thick material. If you are using thick 5/8" (16mm)
material, subtract from each dimension. 1/4" (6.5mm)
Do not use any material with a thickness of less than
5/8" (16mm) as this may compromise the rigidity of
the enclosure.
All enclosure volumes listed are net internal
volumes! Box volume displacement, port
displacement and brace displacement must be
added to obtain the final gross internal volume. All
enclosure dimensions listed have already taken this
into account.
When using subwoofers in a common two
enclosure simply the required volume and, double
in the case of a ported enclosure, use two times the
recommended port(s).
We recommend the use of this speaker in a bi-amplified
system using high-quality satellite speakers and
amplifiers. We do not recommend the use of this
subwoofer with a passive crossover (coil), as this type of
device will adversely affect performance.

Especificaciones del producto

Marca: JL Audio
Categoría: Altavoz de subgraves
Modelo: 12W0v3

¿Necesitas ayuda?

Si necesitas ayuda con JL Audio 12W0v3 haz una pregunta a continuación y otros usuarios te responderán




Altavoz de subgraves JL Audio Manuales

Altavoz de subgraves Manuales

Últimos Altavoz de subgraves Manuales