Jung 4193 TSM Manual de Usario

Jung Casa inteligente 4193 TSM

Lee a continuación 📖 el manual en español para Jung 4193 TSM (5 páginas) en la categoría Casa inteligente. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/5
Universal push-button module
Universal push-button module, 1-gang
Art. No. : 4191 TSM
Universal push-button module, 2-gang
Art. No. : 4192 TSM
Universal push-button module, 3-gang
Art. No. : 4193 TSM
Universal push-button module, 4-gang
Art. No. : 4194 TSM
Operating instructions
1 Safety instructions
Electrical equipment may only be installed and fitted by electrically skilled persons.
Failure to observe the instructions may cause damage to the device and result in fire and
other hazards.
Use only the enclosed plastic screws for fastening to the supporting frame! Otherwise
safe operation cannot be ensured. Electrostatic discharges can cause defects in the
device.
These instructions are an integral part of the product, and must remain with the end
customer.
2 Function
System information
This device is a product of the KNX system and complies with the KNX directives. Detailed
technical knowledge obtained in KNX training courses is a prerequisite to proper understanding.
The function of this device depends upon the software. Detailed information on loadable
software and attainable functionality as well as the software itself can be obtained from the
manufacturer´s product database. Planning, installation and commissioning of the device are
carried out with the aid of KNX-certified software. The latest versions of product database and
the technical descriptions are available on our website.
Intended use
- Operation of loads, e.g. light on/off, dimming, blinds up/down, brightness values,
temperatures, calling up and saving light scenes, etc.
- Installation in appliance box according to DIN 49073
Product characteristics
- The pushbutton functions switching, dimming, controlling blinds, value transmitter, calling
up moods, etc.
- Measurement of the room temperature
- Completion with keyset
- Two red status LEDs for each button
- A blue operation LED as an orientation light and to indicate the programming status
- Integrated bus coupling unit
- One, two or three functions per button
- Push-button function or rockers function, vertical or horizontal
- Connection of push-button extension module to expand the universal push-button sensor
module to include four additional buttons
3 Operation
Operating a function or load
Depending on the programming, a button can have up to three functions assigned to it –
upper/left, lower/right, entire surface. Operation depends on the specific function.
oSwitch: Short press on button.
oDim: Long press on button. The dimming process ends when the button is released.
oMove Venetian blind: Long press on button.
1/5
32566733
j0082566733 23.03.2016
oStop or adjust Venetian blind: Short press on button.
oCall up light scene: Short press on button.
oSave light scene: Long press on button.
oSet value, e.g. brightness or temperature setpoint: Short press on button.
4 Information for electrically skilled persons
4.1 Fitting and electrical connection
DANGER!
Electrical shock on contact with live parts in the installation environment.
Electrical shocks can be fatal.
Before working on the device, disconnect the power supply and cover up live
parts in the working environment.
Snapping on the adapter frame
oWith the adapter frame (3) in the correct orientation, snap it from the front onto the
pushbutton module (4) (figure 1). Note marking .TOP
Fitting and connecting the device
Figure 1: Mounting the push-button module
(1) Supporting frame
(2) Design frame
(3) Adapter frame
(4) Push-button module
(5) Fastening screws
(6) Buttons
(7) KNX connection terminal
(8) Box screws
Supporting frame side for A design ranges, CD design ranges and FD design. SupportingA
frame side for LS design ranges.B
When the push-button expansion module is used (figure 2): Preferably mounted vertically. Use
large supporting frame (14). When mounting on only one flush-mounted box, countersink the
lower screws into the wall, e.g. with a ø 6 x10 mm hole. Use supporting frame as template.
2/5
32566733
j0082566733 23.03.2016
Universal push-button module
DANGER!
When mounting with 230 V devices under a common cover, e.g. socket outlets,
there is a danger of electrical shocks in the event of a fault!
Electrical shocks can be fatal.
Do not install any 230 V devices in combination with a push-button extension
module under a common cover!
oMount supporting frame (1) or (14) in the correct orientation on an appliance box. Note
marking ; marking or in front. Use only the enclosed box screws (8).TOP A B
oPush frame (2) onto supporting frame.
oMount push-button sensor expansion module (15) preferably below. Route connecting
cable (16) between supporting frame and intermediate web.
oPush-button expansion module: Insert connecting cable (16) in the correct orientation into
slot (17) in the push-button module. Do not crimp the connecting cable (figure 1).
oConnect push-button module (4) to the KNX using KNX connecting terminal (7) and push
onto the supporting frame.
oFasten pushbutton module(s) to supporting frame using the enclosed plastic screws (5).
Tighten the plastic screws only lightly.
oBefore mounting the buttons (6), load the physical address into the device (see chapter
4.2. Commissioning).
Figure 2: Mounting with push-button expansion module
4.2 Commissioning
Loading the physical address and application software
Configuration and commissioning with ETS3.0d Patch A or more recent.
The device is connected and ready for operation.
The buttons are not mounted yet.
iIf the device does not receive any application software, or the wrong application software,
then the blue operation LED flashes slowly.
3/5
32566733
j0082566733 23.03.2016
Universal push-button module

Especificaciones del producto

Marca: Jung
Categoría: Casa inteligente
Modelo: 4193 TSM

¿Necesitas ayuda?

Si necesitas ayuda con Jung 4193 TSM haz una pregunta a continuación y otros usuarios te responderán


Casa inteligente Jung Manuales

Jung

Jung A 5192 KRM TS D Manual de Usario

20 Septiembre 2024
Jung

Jung 4193 TSM Manual de Usario

30 Agosto 2024
Jung

Jung 4192 TSM Manual de Usario

27 Julio 2024

Casa inteligente Manuales

Últimos Casa inteligente Manuales

Brilliant

Brilliant Nexus Home Ultimate 21465 Manual de Usario

27 Octubre 2024
D-Link

D-Link DCS-8010 Manual de Usario

20 Octubre 2024
Niko

Niko 350-20071 Manual de Usario

18 Octubre 2024
Qnect

Qnect QN-WP01 - 414000005 Manual de Usario

16 Octubre 2024
Qnect

Qnect QN-WP04 - 414000001 Manual de Usario

16 Octubre 2024
Elro

Elro AB600S-2 Manual de Usario

13 Octubre 2024
Tenda

Tenda SP15 Manual de Usario

9 Octubre 2024
Eufy

Eufy Lumi Plug-in Night Light Manual de Usario

6 Octubre 2024
ETiger

ETiger ES-D4A Manual de Usario

3 Octubre 2024
Netgear

Netgear Orbi RBS50Y Manual de Usario

2 Octubre 2024