Jung A 5192 KRM TS D Manual de Usario

Jung Casa inteligente A 5192 KRM TS D

Lee a continuación 📖 el manual en español para Jung A 5192 KRM TS D (7 páginas) en la categoría Casa inteligente. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/7
Room controller display compact module
Room controller display compact module
Art. No. : ..519.. KRMTSD
Operating instructions
1 Safety instructions
Electrical devices may only be mounted and connected by electrically skilled
persons.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Use only the enclosed plastic screws for fastening to the supporting frame! Otherwise
safe operation cannot be ensured. Electrostatic discharges can cause defects in the
device.
These instructions are an integral part of the product, and must remain with the end
customer.
2 Function
System information
This device is a product of the KNX system and complies with the KNX directives. Detailed
technical knowledge obtained in KNX training courses is a prerequisite to proper understanding.
The function of this device depends upon the software. Detailed information on loadable
software and attainable functionality as well as the software itself can be obtained from the
manufacturer´s product database. Planning, installation and commissioning of the device are
carried out with the aid of KNX-certified software. The latest versions of product database and
the technical descriptions are available on our website.
Intended use
- Operation of loads, e.g. light on/off, dimming, blinds up/down, brightness values,
temperatures, calling up and saving light scenes, etc.
- Measurement and feedback control of the room temperature
- Installation in appliance box according to DIN 49073
Product characteristics
All buttons can be assigned with push-button sensor functions or functions for controller
operation.
- Back-lit LC display
- One or two functions per button
- Completion with keyset
- Eight status LEDs – red, green or blue
- Brightness of Status LEDs and LED adjustable
- Integrated bus coupling unit
- Connection to room controller or push-button extension module
- Integrated room temperature sensor
- Remote sensor can be connected
- Room temperature control with setpoint value specification
- Two internal independent controllers to control two independent rooms - in conjunction with
extension modules
- Display of room or setpoint temperature (°C or °F)
- Display of outdoor temperature – with external sensor, e.g. weather station
- Display of time, in conjunction with KNX time encoder
- Push-button function or rockers function
- Disabling function: Disable or function switch-over of all or of individual pushbutton
functions
- Alarm function, optionally with confirmation by pressing any button
1/7
32593503
j0082593503 23.02.2016
3 Operation
Operating a function or load
oSwitch: Short press on button.
oDim: Long press on the button.
oMove Venetian blind: Long press on button.
oStop or adjust Venetian blind: Short press on button.
oCall up light scene: Short press on button.
oSave light scene: Long press on button.
oSet value, e.g. brightness or temperature setpoint: Short press on button.
oAdjusting value: Press button for a long time.
iDepending on programming, a button triggers several functions after a longer press or
triggers another function if opposite buttons are pressed simultaneously.
Operating modes and display icons
The device compares the current room temperature with the setpoint temperature and controls
heating or cooling devices according to the current demand. The setpoint temperature depends
on the current operating mode and can be changed by the user, depending on the
programming. The operating modes and the current controller status for the internal controller ś
or are shown in the display.@
- : Operating mode Comfortļ
- : Operating mode StandbyĻ
- : Operating mode Nightĺ
- : Operating mode Frost/heat protection¾
The icon flashes if the room temperature drops below 5 °C / 41 °F. ¾
- : Comfort extension, nightļĺ
- : Comfort extension, frost protectionļ¾
- ... : Fan controller with fan level display. = Fan off.ŝŞ ş Ŝ
- ... : Heating mode with display of the heating stageŢţ Ť
- ... : Cooling mode with display of the cooling stepťŴ ŵ
- or : Setpoint temperature reduced or increased manually... – – ¯ ¯ – – ...
When switched on, the display shows, next to the icon for the current operating mode, either:
- the time: the seconds mark flashes.
- the room temperature: icon ‰
- the outdoor temperature: icon ¶‰
- the setpoint temperature: icon ·‰
- any other temperature: icon ¸
Menu
In the menu, the following displays and settings are available in sequence. Some items are not
visible, depending on the programming of the device.
- Displaying the time
- Display of various temperatures
- : Submenu Controller 1ścon1
- : Submenu Controller 2@con2
- : Submenu Displaydisp
- : Exit menu without savingEnd
The submenus for Controllers 1 and 2 each allow settings to be made for the operation mode,
temperatures and fan levels:
- Temperature for Comfort mode
- Change for Heating standby mode
- Change for Cooling standby mode
- Change for Heating night mode
- Change for Cooling night mode
- Presence mode
- Setpoint shift
- Changing the operating mode
- Fan controller
2/7
32593503
j0082593503 23.02.2016
Room controller display compact module
- Displaying the current room temperature
- Displaying the current temperature setpoint
- Displaying the current outdoor temperature
The following menu items can be used to exit the submenu:
- – Exit and save settingsStor
- – Exit without saving settingsESC
Opening and operating a menu
Figure 1: Opening or exiting a menu
Precondition: The menu is programmed and not disabled.
oSwitching to the menu: Press the top two buttons simultaneously (figure 1).
oExiting a menu: Press the top two buttons simultaneously (with or without saving is
dependent on the programming).
oSelect next menu item: Press the button.X
oSwitch to submenu: Press the button.–^
oExit submenu without saving: Press the button.Z–
oSwitch setting/increase value: Press the button.+
oSwitch setting/reduce value: Press the button.–
Figure 2: Menu buttons
3/7
32593503
j0082593503 23.02.2016
Room controller display compact module

Especificaciones del producto

Marca: Jung
Categoría: Casa inteligente
Modelo: A 5192 KRM TS D

¿Necesitas ayuda?

Si necesitas ayuda con Jung A 5192 KRM TS D haz una pregunta a continuación y otros usuarios te responderán


Casa inteligente Jung Manuales

Jung

Jung A 5192 KRM TS D Manual de Usario

20 Septiembre 2024
Jung

Jung 4192 TSM Manual de Usario

27 Julio 2024

Casa inteligente Manuales

Últimos Casa inteligente Manuales

Brilliant

Brilliant Nexus Home Ultimate 21465 Manual de Usario

27 Octubre 2024
D-Link

D-Link DCS-8010 Manual de Usario

20 Octubre 2024
Niko

Niko 350-20071 Manual de Usario

18 Octubre 2024
Qnect

Qnect QN-WP01 - 414000005 Manual de Usario

16 Octubre 2024
Qnect

Qnect QN-WP04 - 414000001 Manual de Usario

16 Octubre 2024
Elro

Elro AB600S-2 Manual de Usario

13 Octubre 2024
Tenda

Tenda SP15 Manual de Usario

9 Octubre 2024
Eufy

Eufy Lumi Plug-in Night Light Manual de Usario

6 Octubre 2024
ETiger

ETiger ES-D4A Manual de Usario

3 Octubre 2024
Netgear

Netgear Orbi RBS50Y Manual de Usario

2 Octubre 2024