Klein Tools VDV500-920 Manual de Usario

Lee a continuación 📖 el manual en español para Klein Tools VDV500-920 (32 páginas) en la categoría Equipo de medición. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/32
INSTRUCTION MANUAL
ENGLISH
VDV500-920
Digital Toner-Pro a
Digital Probe-Pro K
FRANÇAIS
p. 21
ESPOL
g. 11
TRACE INDIVIDUAL
OR PAIRED WIRES
TRACE SHORTED
OR CONNECTED WIRES
VIA DIGITAL TONING
TEST RJ11, RJ12, AND RJ45
DETECTS CONTINUITY AND P
3 DISTINCT TONES
(2 CONSTANT, 1 ALTERNATIN
EASY-TO-UNDERSTAND
STATUS LED
s
SEND TONES ON
SHORTED OR
CONNECTED WIRES
VIA DIGITAL TONIN
PERFORM
PIN-TO-PIN
MAPPING
REPLACEABLE
PROBE TIP
VDV500-223
VDV500-163
2
ENGLISH
GENERAL SPECIFICATIONS - VDV500-163 DIGITAL TONER-PRO
The Klein Tools VDV500-163 Digital Toner-Pro is a professional-series
analog and digital tone generator for wire identification, wire tracing and
wire pair identification. It features several tone frequencies and strong
power output for tracing wires.
Operating Altitude:
6562 ft. (2000 m) maximum
Relative Humidity:
10% – 90% non-condensing
Operating Temp:
32° to 122° F (0° to 50°C)
Storage Temp:
-4° to 140°F (-20° to 60°C)
Dimensions:
4.65" × 2.52" × 1.10" (118 × 64 × 28 mm)
Weight:
5.29 oz. (150 g) including batteries
Battery Type:
4 × 1.5V AAA Alkaline
Battery Life: Active:
20 hours
Standby/Storage:
3 years
Auto-Power Off:
After 60 minutes of inactivity
Analog Tones:
Constant:
1000Hz, 1500Hz
Alternating:
1000Hz/1500Hz
Tone Power:
8dBm
Continuity Indication
Less than 10kΩ
Voltage Protection: Test Mode:
60V
Tone Mode:
20V through external 600Ω
Specifications subject to change.
T17
T12
T16
FEATURE DETAILS - VDV500-163 DIGITAL TONER-PRO
SYMBOLS - VDV500-163 DIGITAL TONER-PRO
Warning or Caution
Conformité Européenne:
Conforms with European
Economic Area directives
Always wear approved
eye protection
UKCA:
UK Conformity Assessment
Do NOT use on
energized circuits
WEEE:
Electronics disposal
Read instructions
3
TEST MODE Indicator
2
"NRM" (Normal)
Polarity Indicator
3
"REV" (Reverse)
Polarity Indicator
4
"CONT" (Continuity)
Indicator
5
TONE MODE
Indicator
6
Analog Tone
Frequency Indicators
7
Digital/Analog Tone
Button
8
Mode button
9
Power On/Off Button
0
Pin/Pair Selection
Button
Battery Status
Indicator
2
Lanyard Slot
3
Digital Tone Indicator
4
Red ABN (Angled
Bed-of-Nails) Test Clip
5
Black ABN (Angled
Bed-of-Nails) Test Clip
6
Battery Cover
7
Battery Cover Screw
8
Wire Map Indicator
9
Shield Indicator
T20
Test Lead Inputs
T21
RJ45 Port
T1
T10
T11
T19
T8
T2
T3
T5
T7
T13
T9
T4
FEATURE DETAILS - VDV500-163 DIGITAL TONER-PRO
T15
T14
T6
T18
WARNINGS
To ensure safe operations and service of the instruments, follow these instructions.
Failure to observe these warnings can result in re, electric shock, severe injury or death.
The Digital Toner-Pro, test leads, and Digital Probe-Pro, are designed for use on extra-low
voltage cabling systems (less than 60V) for testing when
NOT
energized.
The maximum voltage across ABN Test Clips of the Digital Toner-Pro is 60V in Tes
mode, and 20V in Continuity mode. Connecting the Digital Probe-Pro to live mains AC
power may damage it and pose a safety hazard for the user
DO NOT
use instruments if they are wet, as it could pose a shock hazard
DO NOT
use instruments if they are damaged in any way
Turn off instruments and disconnect all ABN Test Clips before attempting to replace batteries
The battery door must be in place and secure before you operate the instrument
DO NOT
open the case, other than the battery compartment
T21
T20

Especificaciones del producto

Marca: Klein Tools
Categoría: Equipo de medición
Modelo: VDV500-920

¿Necesitas ayuda?

Si necesitas ayuda con Klein Tools VDV500-920 haz una pregunta a continuación y otros usuarios te responderán




Equipo de medición Klein Tools Manuales

Equipo de medición Manuales

Últimos Equipo de medición Manuales