Liberty Garden 704 Manual de Usario
Lee a continuación 📖 el manual en español para Liberty Garden 704 (2 páginas) en la categoría Manguera de jardín. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/2
Liberty Garden Model #704
This hose reel must be mounted to a solid masonry wall or to wall studs
TIP: Remember to use the correct size and quantity of hardware to properly support the
total weight of the unit. A standard 100' length of garden hose weighs approximately 15 lbs.
Filled with water the additional weight can exceed 20 lbs. The mounting hardware must be
able to support the combined weight of the unit, garden hose, plus water.
13.5 in.
15.5 in.
16 in.
Width includes handle
21.5 in.
• Position and hold your hose reel against the brick
masonry wall at a convenient height. Mark the position of
each suspension hole on the wall. Remove the hose reel.
• Using an electric drill, drill holes 9/16” in diameter and
1 5/8” deep at the marked positions on the wall.
• Insert the masonry wall anchors into the anchor sleeve.
Next, insert the anchor and sleeve into the drilled holes
until the steel sleeve is completely in the wall.
• Place the hose reel on the masonry wall anchors.
• Install a washer, lock washer, and nut over each wall
anchor and tighten securely.
INSTALLATION
NOTE: The following hardware (not included)
is recommended for installation.
NOTE: The following hardware (not included)
is recommended for installation.
• Position and hold your hose reel against the wood wall
at a convenient height. Mark the position of each
suspension hole on the wall. Remove the hose reel.
• Using an electric drill, drill pilot holes 1/4” in diameter
and 2 1/2” deep at the marked positions on the wall.
• Align the hose reel suspension holes with the pilot
holes.
• Attach the hose reel to the wall using the lag screws
with washers and tighten securely.
MOUNTING ON BRICK MASONRY WAL MOUNTING ON FLAT WOOD FRAME WALL L
(4) 7 or 8 mm x 60 mm masonry wall anchors
(5/16” x 2 1/2”)
(4) Anchor sleeves
(4) Washers
(4) Lock washers
(4) Nuts
(4) 7 or 8 mm lag screws with washers
(5/16” x 2 1/2”)
This hose reel MUST be mounted to a solid masonry wall or to wall studs
TIP: Remember to use the correct size and quantity of hardware to properly support the
total weight of the unit. A standard 100' length of garden hose weighs approximately 15 lbs.
Filled with water, the additional weight can exceed 20 lbs. The mounting hardware must be
able to support the combined weight of the unit, garden hose, plus water.
Mounting Hole
Size 10mm
Mounting Hole
Size 10mm
Especificaciones del producto
| Marca: | Liberty Garden |
| Categoría: | Manguera de jardín |
| Modelo: | 704 |
¿Necesitas ayuda?
Si necesitas ayuda con Liberty Garden 704 haz una pregunta a continuación y otros usuarios te responderán
Manguera de jardín Liberty Garden Manuales
27 Agosto 2024
24 Agosto 2024
Manguera de jardín Manuales
- Manguera de jardín Eurom
- Manguera de jardín Vonroc
- Manguera de jardín Florabest
- Manguera de jardín Hazet
- Manguera de jardín Gardena
- Manguera de jardín Aqua Joe
- Manguera de jardín Hozelock
- Manguera de jardín Waldbeck
- Manguera de jardín Cocraft
- Manguera de jardín Sani-Lav
- Manguera de jardín TOOLMATE
- Manguera de jardín Agrati
Últimos Manguera de jardín Manuales
8 Octubre 2024
18 Septiembre 2024
18 Septiembre 2024
16 Septiembre 2024
16 Septiembre 2024
14 Septiembre 2024
13 Septiembre 2024
13 Septiembre 2024
13 Septiembre 2024
13 Septiembre 2024