Liberty Garden 710 Manual de Usario

Liberty Garden Manguera de jardín 710

Lee a continuación 📖 el manual en español para Liberty Garden 710 (9 páginas) en la categoría Manguera de jardín. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/9

VISIT OUR WEBSITE: W . .COM WW LIBERTYGARDENPRODUCTS

OR CALL US TO FREE AT 1-866-820-5805LL

IMPORTANT READ THE OWNER’S MANUAL BEFORE ASSEMBLING :

LIBERTY GARDEN PRODUCTS, INC.

1161 SOUTH PARK DRIVE, RNERSVILLE NC 4KE 2728

Owner’s Ma alnu

™

WATCH THE VIDEO

Model #710

TOOLS REQUIRED:

PARTS LIST

HARDWARE INCLUDED

B D

PliersAA. Allen wrench (Supplied) Adjustable wrench Drill

BB. Allen bolts (2)

A. B. C. D. Crank handle (1) Leader hose (1) Base shelf (1) Hose reel (1)

DD. Allen screw (1)CC. Lock nuts (2)

Note: Hardware not shown to actual size.

Estimated Assembly Time : 10 minutes (not including mounting the hose reel)

PRE-ASSEMBLY

The wall mounting hardware is included with this unit. Check with the retailer or visit a hardware store to purchase.NOT

IMPORTANT: LAY OUT ALL PARTS AND FASTENERS. MAKE SURE ALL PARTS ARE

ACCOUNTED FOR. IF ANY PART IS MISSING PLEASE CONTACT LIBERTY GARDEN PRODUCTS

AT YOU CAN ALSO VISIT OUR 1-866-820-5805. DO NOT CONTACT THE RETAILER.

WEBSITE, WWW.LIBERTYGARDENPRODUCTS.COM, FOR MORE INSTRUCTIONS, PICTURES

AND HELPFUL HINTS.

INSTALLATION

1 2

NOTE: The following hardware (not included)

is recommended for installation.

NOTE: The following hardware (not included)

is recommended for installation.

• Position and hold your Navigator base shelf (C) against

the brick masonry wall at a convenient height. Mark the

position of each suspension hole on the wall. Remove the

base shelf (C).

• Using a power drill, drill holes 5/16” in diameter and

1 5/8” deep at the marked positions on the wall.

• Insert the masonry wall anchors into the anchor sleeve.

Next, insert the anchor and sleeve into the drilled holes

until the steel sleeve is completely in the wall.

• Place the base shelf (C) on the masonry wall anchors.

• Install a washer, lock washer, and nut over each wall

anchor and tighten securely.

• Position and hold your Navigator hose reel base shelf

the position of each suspension hole on the wall.

Remove the base shelf (C).

• Using a power drill, drill pilot holes 1/4” in diameter and

2 1/2” deep at the marked positions on the wall.

• Align the hose reel suspension holes with the pilot

holes.

• Attach the base shelf (C) to the wall using the lag

screws with washers and tighten securely.

MOUNTING ON BRICK MASONRY WALL MOUNTING ON FLAT WOOD FRAME WALL

(4) 7 or 8 mm x 60 mm masonry wall anchors

(5/16” x 2 1/2”)

(4) Anchor sleeves

(4) Washers

(4) Lock washers

(4) Nuts

(4) 7 or 8 mm lag screws with washers

(5/16” x 2 1/2”)

This hose reel must be mounted to a solid masonry wall or to wall studs

Mounting Hole

Size: 5/16”

Mounting Hole

Size: 1/4”

TIP: Remember to use the correct size and quantity of hardware to properly support the

total weight of the unit. A standard 100' length of garden hose weighs approximately 15 lbs.

Filled with water the additional weight can exceed 20 lbs. The mounting hardware must be

able to support the combined weight of the unit, garden hose, plus water.

NOTE: Drill hole diameters may vary based on anchor sleeve,

concrete screws, and wood screw manufacturer.

Check product recommendations before drilling holes.

Especificaciones del producto

Marca:	Liberty Garden
Categoría:	Manguera de jardín
Modelo:	710
Profundidad:	168 mm
Altura:	69 mm
factor vorm:	Half-Height/Half-Length (HH/HL)
Resolución Máxima:	2048 x 1536 Pixels
Puerto(s) VGA (D-Sub):	2
Resolución (analógica máxima):	2048 x 1536 Pixels
hdmi:	Nee
Resolución (digital máxima):	1920 x 1200 Pixels
Sintonizador de TV integrado:	Nee
Entrada de video:	Nee
Compatibilidad con Mac:	Nee
Puertos DVI-I:	2
Número de procesadores instalados:	1
Tipo de conexión:	PCI Express x1
Puerto de entrada de TV:	Nee
TV apagada:	Nee
Tipo de enfriamiento:	Passief
Adaptador de gráficos, tipo de memoria:	GDDR2
Autobús de memoria:	128 Bit
Versión de DirectX:	Nee
Fuente de alimentación mínima del sistema:	- W
Consumo de energía (típico):	9.5 W
DVI de doble enlace:	Ja
Adaptador gráfico RAMDAC:	400 MHz
Pantallas máximas por tarjeta de video:	2
Número de puertos DVI:	2
Doble VGA:	Ja