Neumann LH 47 Manual de Usario
Neumann
soporte de altavoz
LH 47
Lee a continuación 📖 el manual en español para Neumann LH 47 (2 páginas) en la categoría soporte de altavoz. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/2
LH 47 Mounting manual
Important safety and mounting instructions
• Have the product mounted by a specialist.
• Due to his/her technical training, know-how and experience as well
as knowledge of relevant provisions, regulations and standards, the
specialist must be able to assess assigned tasks, recognize poten-
tial hazards and ensure appropriate safety measures. The following
safety and mounting instructions are addressed to this specialist.
•
Read and follow the safety and mounting instructions, keep these
instructions and always include them when passing the LH 47 on
to third parties.
•
Also read and follow the installation instructions contained in the
operating manual of the mounted loudspeaker.
• -When mounting, observe and follow the local, national and interna
tional regulations and standards.
•
Only mount loudspeakers in combination with other accessories from
the Neumann mounting hardware range to the LH 47 (see below).
•
Only mount one loudspeaker with a maximum weight of 65 kg
(143.3 lbs) to the LH 47.
•
Do not install the LH 47 in locations where it is exposed to externally
generated vibrations.
• Always use the original supplied parts.
In the following you will be asked to combine other acces-
sories from the Neumann mounting hardware range with the
LH 47. Download the PDF file Hardware Mounting Matrix“ ”
from www.neumann.com. Only combine the Neumann moun-
ting hardware as specified in the Hardware Mounting Matrix“ ”.
•
First attach a Neumann mounting hardware that features a cylinder-
shaped holder (e.g. LH 43, 45, 46) to a vertical or horizontal surface.
Follow the safety and mounting instructions contained in the operat-
ing manual of the selected mounting hardware.
Horizontal surfaces must be able to carry the weight of all parts
used plus the weight of the loudspeaker. With vertical surfaces,
you additionally have to consider the leverage.
•
Fasten your loudspeaker to a Neumann mounting hardware that is
also suitable for mounting to the LH47 (e.g. LH25, LH 42, 61, refer LH
to the Hardware Mounting Matrix ). Follow the safety and mount“ ” -
ing instructions contained in the operating manual of the selected
mounting hardware.
•
Next attach the LH 47 to the mounting hardware/loudspeaker
combination (see fi . 1).
–
If di erent mounting positions are possible, choose mounting
points that minimize leverage when the loudspeaker is tilted.
– Tighten the nuts with a torque of 2 m.0N
•
Now mount the LH 47 onto the cylinder-shaped holder F of the
Neumann mounting hardware. To do so, proceed as shown in fi .2.
CAUTION!
Danger of injury and material damage
due to dropping of the loudspeaker
Unless the LH 47 is properly fastened to the cylinder-shaped
holder, the loudspeaker together with the mounting hardware
can drop down.
XHave the loudspeaker held by a second specialist who is
physically able to do so. The requirements mentioned ear-
lier also apply to this specialist.
XWhen mounting the loudspeaker, provide a sufficien addi-
tional protection against dropping.
– Position the locking ring of the cylinder-shaped holder in the
F
upper position and tighten the 4 Allen screws so that the locking
ring cannot work loose and fall o .
– Place the LH 47 onto the cylinder-shaped holder F as shown in
gs. 2, 3 and 4.
– Loosen th llen screws of the locking ring (see g. 5a). e 4A
– Lower the locking ring into position (see g 5b).
– Tighten the 4 Allen screws with a torque of 1 Nm. The LH 47 is 5
now properly fastened to the cylinder-shaped holder F.
•
Use safety wires to additionally protect the loudspeaker and the
mounting hardware against dropping. The safety wires, rope ter-
minations and coupling links must comply in their dimensioning
and condition with the regulations and standards of the country in
which they are used and must reliably prevent dropping of a load
of 65 kg (143.3 lbs).
• Make sure that ...
– you use both screws C to fasten the LH 47 to suitable Neumann
mounting hardware;
–
the surface to which you fasten the Neumann mounting hardware
cannot tip over or drop down;
–
the LH 47, the associated mounting hardware and the loudspeaker
cannot tip over or drop down, even if the power or audio cables
are pulled;
–
you check every 3 months if all screws are properly tightened and
if the LH 47 and associated mounting hardware, additional fasten-
ing elements, as well as the loudspeaker are in proper condition.
In case of any damage or any deviation from the safety and mounting
instructions, immediately dismount the loudspeaker, the LH 47 and
the additional mounting hardware used.
Delivery includes
A: 1 x LH 47 mounting
adapter plate
B: 4 x washers
C: 2 x M8x25 screws
D: 2 x lock washers
E: 2 x M8 nuts
Specification
Weight 250 g (0.6 lbs)
Dimensions 16 x 145 x 80 mm
(H x W x D)
x 5 x 3 ⅝”¾”⅛”
(H x W x D)
Max. load 65 kg (143.3 lbs)
Guarantee
For the current terms and conditions of the product guarantee please
visit www.neumann.com.
GEORG NEUMANN GMBH · LEIPZIGER STR. 112 · 10117 BERLIN · GERMANY 10/15 · 544942/ A02
TEL +49 (0)30 / 41 77 24-0 · FAX -50 · HEADOFFICE@NEUMANN.COM · WWW.NEUMANN.COM
Mounting Adapter Plate
A
B
D
E
B
C
B
D
E
B
C
B
D
E
A
C
1
2
F
3
4 5
5a
5b
15 Nm
20 Nm
Example:
LH25
Especificaciones del producto
| Marca: | Neumann |
| Categoría: | soporte de altavoz |
| Modelo: | LH 47 |
¿Necesitas ayuda?
Si necesitas ayuda con Neumann LH 47 haz una pregunta a continuación y otros usuarios te responderán
soporte de altavoz Neumann Manuales
15 Septiembre 2024
15 Septiembre 2024
15 Septiembre 2024
15 Septiembre 2024
15 Septiembre 2024
15 Septiembre 2024
soporte de altavoz Manuales
- soporte de altavoz Pioneer
- soporte de altavoz Nedis
- soporte de altavoz Audizio
- soporte de altavoz Vonyx
- soporte de altavoz Sennheiser
- soporte de altavoz Bose
- soporte de altavoz Teufel
- soporte de altavoz Pro-Ject
- soporte de altavoz Adj
- soporte de altavoz Sanus
- soporte de altavoz Vogels
- soporte de altavoz Electro-Voice
- soporte de altavoz Valcom
- soporte de altavoz One For All
- soporte de altavoz Omnitronic
- soporte de altavoz Newstar
- soporte de altavoz Ultimate
- soporte de altavoz Peerless
- soporte de altavoz Dynaudio
- soporte de altavoz Chief
- soporte de altavoz Crestron
- soporte de altavoz Monacor
- soporte de altavoz Sanus Systems
- soporte de altavoz Heckler Design
- soporte de altavoz Bell'O
- soporte de altavoz Extron
- soporte de altavoz Tannoy
- soporte de altavoz Gravity
- soporte de altavoz Kanto
- soporte de altavoz Kramer
- soporte de altavoz Multibrackets
- soporte de altavoz Adam Hall
- soporte de altavoz Norstone
- soporte de altavoz Roadworx
- soporte de altavoz My Wall
- soporte de altavoz Xtech
Últimos soporte de altavoz Manuales
4 Octubre 2024
3 Octubre 2024
30 Septiembre 2024
27 Septiembre 2024
19 Septiembre 2024
19 Septiembre 2024
19 Septiembre 2024
19 Septiembre 2024
19 Septiembre 2024
19 Septiembre 2024