Neumann LH 48 Manual de Usario
Neumann
soporte de altavoz
LH 48
Lee a continuación 📖 el manual en español para Neumann LH 48 (2 páginas) en la categoría soporte de altavoz. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/2
Important safety and mounting instructions
• Have the product mounted by a specialist.
• Due to his/her technical training, know-how and experience as well
as knowledge of relevant provisions, regulations and standards, the
specialist must be able to assess assigned tasks, recognize poten-
tial hazards and ensure appropriate safety measures. The following
safety and mounting instructions are addressed to this specialist.
•
Read and follow the safety and mounting instructions, keep these
instructions and always include them when passing the 48 on LH
to third parties.
•
Also read and follow the installation instructions contained in the
operating manual of the mounted loudspeaker.
• -When mounting, observe and follow the local, national and interna
tional regulations and standards.
•
Do not install the LH48 in locations where it is exposed to externally
generated vibrations.
• Always use the original Neumann supplied parts.
•
Mount the 48 in combination with other accessories from the LH
Neumann mounting hardware range to loudspeakers with a maxi-
mum weight of 65 kg (143.3 lbs).
Download the PDF file Hardware Mounting Matrix from “ ”
www.neumann.com. Only combine the Neumann mounting
hardware as specified in the Hardware Mounting Matrix . “ ”
CAUTION!
Danger of injury and material damage
due to dropping of the loudspeaker/mounting hardware!
Unless the 48 is properly fastened, the loudspeaker together LH
with the mounting hardware can drop down.
XHave the loudspeaker held by a second specialist who is physi-
cally able to do so. The requirements mentioned earlier also
apply to this specialist.
XWhen mounting the loudspeaker, provide a sufficien additional
protection against dropping.
If you use other M8 bolts than the supplied ones to fasten the LH48
to other Neumann mounting hardware and/or K&M monitor stands,
the loudspeaker together with the mounting hardware can drop
down.
XAlways use the supplied bolts to fasten the LH 48.
• Fasten the LH 48 to the K&M monitor stand. Use the two bolts C and
fasten them with a torque of 10 Nm (see fi . 1) .
•
Attach the mounting hardware to the LH 48 (see the “Hardware
Mounting Matrix”). Use the two bolts and fasten them with a
D
torque of 20 Nm (see fi . 2). Also read and follow the safety and
mounting instructions contained in the operating manual of the
selected mounting hardware.
•
If different mounting positions are possible, choose mounting points
that minimize leverage when the loudspeaker is tilted. As a rule,
this means that the other Neumann mounting hardware is centrally
mounted to the LH48.
•
Attach your loudspeaker to the Neumann mounting hardware. Follow
the safety and mounting instructions of the loudspeaker and the
mounting hardware.
•
Use safety wires to additionally protect the loudspeaker and the
mounting hardware against tipping/dropping. The safety wires, rope
terminations and coupling links must comply in their dimensioning
and condition with the regulations and standards of the country in
which they are used and must reliably prevent tipping/droppin of
a loudspeaker and the attached mounting hardware.
• Make sure that ...
–
the LH48, the K&M monitor stand, the associated mounting hard-
ware and the loudspeaker cannot tip over or drop down, even if
the power or audio cables are pulled;
–
you replace the safety wires and coupling links by new ones when
they have prevented tipping/dropping;
–
you check every 3 months if all screws are properly tightened
and if the 48, the K&M monitor stand and associated LH mount-
ing hardware, additional fastening elements, safety wires and
coupling links, as well as the loudspeaker are in proper condition.
In case of any damage or any deviation from the safety and mounting
instructions, immediately dismount the loudspeaker, the 48 and LH
the additional mounting hardware used.
Delivery includes
A: 1 x LH48 stand adaptor plate
B: 2 x M6x16 bolts with countersunk Allen key head
C: 2 x M8x20 bolts with countersunk Allen key head
D: 2 x metal washers
E: 2 x M8 nuts
F: 2 x cover caps, PVC
G: 1 x 4 mm Allen key
H: 1 x 5 mm Allen key
Specification
Weight 0.260 kg (0.6 lbs)
Dimensions 4 x 60 x 146 mm (H x W x D)
5/32" x 2 3/8" x 5 3/4" (H x W x D)
Max. load 65.0 kg (143.3 lbs)
Guarantee
For the current terms and conditions of the product guarantee please
visit www.neumann.com.
EN
GEORG NEUMANN GMBH · LEIPZIGER STR. 112 · 10117 BERLIN · GERMANY 10/15 · 549114/A02
TEL +49 (0)30 / 41 77 24-0 · FAX -50 · HEADOFFICE@NEUMANN.COM · WWW.NEUMANN.COM
LH 48 Mounting manual
Mounting flan e adaptorg
*
Sourced from 3rd parties
A
B
D
E
G
F
C
1
2
A
Example/Exemple/-
Beispiel/Spanisch:
LH 25
D
D
E
F
B
E
F
B
I
II
C
C
H
*
*
*
4 mm
H
G
5 mm
20 Nm
20 Nm
Especificaciones del producto
| Marca: | Neumann |
| Categoría: | soporte de altavoz |
| Modelo: | LH 48 |
¿Necesitas ayuda?
Si necesitas ayuda con Neumann LH 48 haz una pregunta a continuación y otros usuarios te responderán
soporte de altavoz Neumann Manuales
15 Septiembre 2024
15 Septiembre 2024
15 Septiembre 2024
15 Septiembre 2024
15 Septiembre 2024
15 Septiembre 2024
soporte de altavoz Manuales
- soporte de altavoz Pioneer
- soporte de altavoz Nedis
- soporte de altavoz Audizio
- soporte de altavoz Vonyx
- soporte de altavoz Sennheiser
- soporte de altavoz Bose
- soporte de altavoz Teufel
- soporte de altavoz Pro-Ject
- soporte de altavoz Adj
- soporte de altavoz Sanus
- soporte de altavoz Vogels
- soporte de altavoz Electro-Voice
- soporte de altavoz Valcom
- soporte de altavoz One For All
- soporte de altavoz Omnitronic
- soporte de altavoz Newstar
- soporte de altavoz Ultimate
- soporte de altavoz Peerless
- soporte de altavoz Dynaudio
- soporte de altavoz Chief
- soporte de altavoz Crestron
- soporte de altavoz Monacor
- soporte de altavoz Sanus Systems
- soporte de altavoz Heckler Design
- soporte de altavoz Bell'O
- soporte de altavoz Extron
- soporte de altavoz Tannoy
- soporte de altavoz Gravity
- soporte de altavoz Kanto
- soporte de altavoz Kramer
- soporte de altavoz Multibrackets
- soporte de altavoz Adam Hall
- soporte de altavoz Norstone
- soporte de altavoz Roadworx
- soporte de altavoz My Wall
- soporte de altavoz Xtech
Últimos soporte de altavoz Manuales
4 Octubre 2024
3 Octubre 2024
30 Septiembre 2024
27 Septiembre 2024
19 Septiembre 2024
19 Septiembre 2024
19 Septiembre 2024
19 Septiembre 2024
19 Septiembre 2024
19 Septiembre 2024