Neumann LH 61 Manual de Usario

Lee a continuación 📖 el manual en español para Neumann LH 61 (3 páginas) en la categoría soporte de altavoz. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/3
LH 61 Mounting manual
Important safety and mounting
instructions
Read and follow the safety and mounting instructions, keep these
instructions easily accessible and always include them when pas-
sing the LH 61 on to third parties.
Also read and follow the installation instructions contained in the
operating manual of the studio monitor to be mounted.
-When mounting, follow the local, national and international regu
lations and standards.
Intended use
The LH 61 is a holder for mounting a studio monitor on a ceiling or a
stand and providing optimal orientation. The LH 61 is only suitable
for 2-way studio monitors and must only be used indoors in clean, dry
rooms such as studios.
To properly mount the LH61 together with a studio monitor, you need
additional Neumann accessories (see the “Mounting Hardware Mat-
rix” at www.neumann.com) and additional fastening elements for
mounting on a ceiling, which are not included with delivery.
The LH 61 must not be used for other purposes or in other environ-
ments. In case of any damage or any deviation from the safety and
mounting instructions, immediately dismount the studio monitor and
the LH61.
Required qualifications
Only skilled personnel may attach the LH 61 to the studio monitor
and mount it on a ceiling or stand. Due to his/her technical training,
know-how and experience as well as knowledge of relevant provisi-
ons, regulations and standards, the specialist must be able to assess
assigned tasks, recognize potential hazards and ensure appropriate
safety measures.
Safety instructions for mounting
Mount only one LH 61 to one studio monitor, as described in these
assembly instructions.
If the studio monitor is heavy, find a second person to help carry
out the work; during the work, place the studio monitor on a flat,
stable surface that can support its weight.
Place something soft underneath the studio monitor so that you do
not scratch its surface while performing the work.
Always use the enclosed original accessories.
-The ceiling or stand must be able to support the weight of the stu
dio monitor and all accessories used, such that no parts will fall
even if someone pulls hard on the power or audio cables. When cal-
culating the weight, also take into account the additional leverage.
When mounting the LH61 on a ceiling, use fastening elements (not
included with delivery) that are suciently dimensioned to ensure
that the entire weight is held securely.
Mount the LH61 and the attached studio monitor on a flat, non-slip
surface or on a suitable stand.
Attach the angle piece to the ceiling or stand. If necessary, use
additional Neumann accessories (e.g. LH29 or LH43 in combina-
tion with LH47).
-Then attach the mounting bracket and the brace for the vertical inc
lination adjustment to the angle piece and hook the studio monitor
into the LH61. Then adjust the studio monitor to the desired inc-
lination.
Tighten all screws by hand. Once you have finished mounting and
aligning the studio monitor, ensure that all screws are firmly tigh-
tened.
Take additional measures to ensure that the LH61 and the attached
studio monitor cannot fall. Use safety wires that are suciently
dimensioned for the weight to be secured.
Every 3 months, check that all screws are properly tightened and
that the LH 61, the studio monitor and the ceiling or stand to which
the LH 61 is fastened are in the proper condition.
Replace the safety wire once it has already prevented the studio
monitor from falling once.
Delivery includes
A: 1 x mounting bracket
B: 1 x brace for vertical inclination adjustment
C: 1 x angle piece
D: 2 x metal washers, M6
E: 2 x Allen screws, M8x12
F: 6 x Allen screws, M6x12
G: 1 x Allen key, 5mm
H: 1 x Allen key, 4mm
Specications
Weight 1.2kg
Dimensions when assembled approx. 193x78x284mm (H x W x D)
Max. load 10kg
Warranty
For the current terms and conditions of the warranty, please visit
www.neumann.com.
   ·  .  ·   ·  / · /
  () /   - ·  - · @. · ..
EN
LH 61
Mounting manual
1
2 3
54
A
F
E
B
C
G H
D
LH 43
Sourced from 3rd parties
B
Example | Beispiel
Exemple | Ejemplo
A
D
DF
F
2
1
3
LH 47
F
F
C
12345678910
1+9
2, 5
1+6,
6+10
3+8
4+7
LH 47
3/8" Stand/Stativ/Trépied/Trípode
KH 120
KH 80
Mounting bracket ( )/Haltebügel ( )/
A A
Arceau de support ( )/Soporte de A
montaje ( ) A
C
LH 61
Mounting manual
6 7
8 9
180°
1 = 10°
2 = 25°
3 = > 25°
1 = > 3
2 = 3
3 = 15°
3–4 x
E/F
G/H
1 2 3
M6: E, G
M8: F, H

Especificaciones del producto

Marca: Neumann
Categoría: soporte de altavoz
Modelo: LH 61

¿Necesitas ayuda?

Si necesitas ayuda con Neumann LH 61 haz una pregunta a continuación y otros usuarios te responderán




soporte de altavoz Neumann Manuales

Neumann

Neumann LH 47 Manual de Usario

15 Septiembre 2024
Neumann

Neumann LH 64 Manual de Usario

15 Septiembre 2024
Neumann

Neumann LH 61 Manual de Usario

15 Septiembre 2024
Neumann

Neumann LH 46 Manual de Usario

15 Septiembre 2024
Neumann

Neumann REK 4 Manual de Usario

15 Septiembre 2024
Neumann

Neumann LH 48 Manual de Usario

15 Septiembre 2024

soporte de altavoz Manuales

Últimos soporte de altavoz Manuales