Power Dynamics PDM-Y801 Manual de Usario

Lee a continuación 📖 el manual en español para Power Dynamics PDM-Y801 (24 páginas) en la categoría consola de mezclas. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/24
PDM-Y Series Music Mixer
Ref. nr.: 172.653; 172.655; 172.657
INSTRUCTION MANUAL
GEBRUIKSAANWIJZING
BEDIENUNGSANLEITUNG
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
INSTRUKCJA OBSŁUGI
NÁVOD K POUŽI
V1.0
2
ENGLISH
Congratulations to the purchase of this wer Dynamics product. Please read is manual thoroughly prior to using the unit in Po th
order to benet fully from all features.
Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to
avoid re and/or electrical shoc Repairs must only be carried out by a qualied technician in order to avoid electrical shock. k.
Keep the manual for future reference.
- Prior to using the unit, please ask advice from a
specialist. When the unit is switched on for the rst time,
some s ll may occur. This is normal and will disappear me
after a while.
- The unit contains voltage carrying parts. Therefore do
NOT open the housing.
- Do not place metal objects or pour liquids into the unit
This may cause electrical shock and malfunction.
- Do not p ce the unit near heat sources such as la
radiators, etc. Do not place the unit on a vibrating
surface. Do not cover the ventilation holes.
- The unit is not suitable for continuous use.
- Be careful with the mains lead and do not damage it. A
faulty or damaged ins lead can cause electrical shock ma
and malfunction.
- When unplugging the unit from a mains outlet, always
pull the plug, never the lead.
- Do not plug or unplug the unit with wet hands.
- he plug and/or the mains lead are damaged, they If t
need to be replac by a qualied technician. ed
- If the unit is damaged to such an extent that internal
parts are visible, do NOT plug the unit into a mains outlet
and DO NOT switch the unit on. Contact your dealer.
- To avoid re and shock hazard, do not expose the unit to
rain and moisture.
- All repairs should be carried out by a qualied technician
only.
- Connect the unit to an earthed mains outlet (220-
240Vac/50Hz) protected by a 10-16A fuse.
- During a thunderstorm or if the unit will not be used for a
longer period of time unplug it from the mains. The rule ,
is: Unplug it from the mains when not in use.
- If the unit has not been used for a longer period of time,
condensation may occur. Let the unit reach room
temperature before you switch it on.
- Never use the unit in humid oms or outdoors. ro
- To prevent accidents in companies, you must follow the
applicable guide lines and follow the instructions.
- Do not repeatedly switch the xture on and o. This
shortens the life time.
- Keep the unit out of the reach of children. Do not l ve ea
the unit unattended.
- Do not use cleaning sprays to clean switches. The
residues of these sprays cause deposits of dust and
grease. In case of malfunction, always seek advice from
a specialist.
- Do not force the control s.
- is unit is with speaker insid which can cause Th e
magnetic eld. Keep this unit at least 60cm away from
computer or TV.
- If this product have a built-in lead-acid rechargeable
battery. Please recharge the battery every 3 months if
you are not going to use the product for a long period of
time. Otherwise the battery may be permanently
damaged.
- If the battery is damaged please replace with same
specications battery. And dispose the damaged battery
environment friendly.
- e unit has fallen, always have it checked by a If th
qualied technici before you switch the unit on again. an
- Do not use chemicals to clean the unit. They damage the
varnish. Only clean the unit with a dry cloth.
- Keep away from electronic equipment that may cause
interference.
- ly use original spares for repairs, otherwise rious On se
damage and/or dangerous radiation may occur.
- Switch the unit o prior to unplugging it from the mains
and/or other equipment. Unplug all leads and cables
prior to moving the unit.
- ke sure that the mains lead cannot be damaged when Ma
people walk on it. Check the mains lead before every use
for damages and faults!
- The mains voltage is 220-240Vac/50Hz. Check if power
outlet match. If you travel, make sure that the mains
voltage of the country is suitable for this unit.
- Keep the original packing materi so that you can al
transport the unit in safe conditions.
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sucient
magnitude to cause a shock hazard.
This mark attracts the attention o the user to important instructions that are contained in the manual and that he should f
read and adhere to.
The unit has been certied CE. It is prohibited to make any changes to the unit. They would invalidate the CE certicate and
their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and
35 95°C/ °F .
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authoriti or your es
dealer about the way to proceed. The specications are typical. The actual values can slightly change from one unit to the other.
Specications can be changed without prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid
your warranty. The warranty is not applicable in case of accidents or dam es caused by inappropriate use or disre ect of the warnings ag sp
contained in this manual. Power Dynamics cannot be held respo ible for personal injuries caused by a disrespect of the safety ns
recommendations and warnings. This is also applicable to all damages in whatever form.
3
UNPACKING INSTRUCTION
CAUTION! Carefully unpack the box on receipt. Check the contents to ensure that all parts are present and have been up
received in good condition. Notify the shipper immediately and retain packaging material if any parts appear damaged from
shipping or the package itself shows signs of mishandling. Save the package and all packaging materials. If the product must be
returned, it is important that the product is returned in the original factory box and packaging. If the device has been exposed to
drastic temperature uctuation (e.g. after transportation), do not switch it on immediately. The arising condensation water might
damage your device. Leave the device switched o until it has reached room temperature.
POWERSUPPLY
The label on the back/under side of the product indicates the mains ltage to which it must be connected. Check that the mains vo
voltage corresponds to this. Any other voltage than the one indicated may cause irreparable damage to the unit. The unit must
also be connected directly to the mai voltage and no dimmer or adjustable power supply may be used. ns
Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate
electrical ground to avoid the risk of electrocution or re.
OVERVI EW
1. CROPHONE/LINE/GUITAR INPUTMI
Balanced XLR combo input jacks connecting and 6.3mm (1/4”) for
microphone, musical instrument or audio device .
2. +48V PHANTOM SWITCH
This switch toggles phantom power on and o. When the switch is on the
mixer supplies +48V phantom power to all channels that have XLR inputs.
Turn this switch on when using one or more phantom-powered condenser
microphones.
3. NEL 3 AND 4 INPUT CHAN
6.3mm input jacks. For MONO, use left input.
4. MAIN OUTP UT
XLR connectors for main mix output.
5. FOOT SWITCH
6.3mm jack for DSP processor mute switch (foot).
6. HEADPHONE OUTPUT
6.3mm jack headphone monitor output.
7. GAIN AND LOW C UT
A. Channel 1 and 2 gain knob. Rotate to adjust the input sensitivity of the
MIC/LINE input.
B. Press the low cut button to cut out the low frequency sound input from “ ”
the microphone.
8. HIGH LOW AND
Rotate to adjust the low- (bass) and high (treble) frequency levels.
9. FX
Rotate to adjust the volume level of the corresponding channel that is fed to
the eects processor.
10. STEREO/MONO AND MAIN VOLUME
A. Press to select mono mode. Bump (up) to select stereo mode. When in mono mode, the signal of the 2 channels are
equally sent to the left and right main mix. In stereo mode, both channels are kep separate. t
B. Rotate to adjust the channel signal level that is sent to the main mix.
11. CHAN AND NEL 5 6 INPUT
3.5mm TRRS input jack. TRRS schedule as below:
T Left R1 = Right R2 = GND S = M = IC
12. CHANNEL 3/4 AND 5/6 VOLUME
Rotate to adjust the corresponding channel s volume level in the main mix.
13. MP3 VOLUME
Rotate to adjust the MP3 channel s volume level in the main mix.
14. BT PAIR
Press the button to initiate the searching state (t button will blinking quickly). The PDM mixer will be ndable on the BT he be fi
streaming device. After successful pairing, the button will be illuminated. When playing via BT, the button will be blinking
slowly. Long press the button to end the pairing, searching state will be initiated again.
15. BT VOLUME
Rotate to adjust the BT channel s volume level in the main mix.
16. DSP CONTROL
DSP eects mode selection- and conrmation knob.
17. PARA
Rotate to adjust the parameters of the DSP eects processor.
18. DSP VOLUME
Rotate to adjust the DSP eect volume level in the main mix.
19. HEADP NE VOLUME HO
Rotate to adjust the headphone output volume.

Especificaciones del producto

Marca: Power Dynamics
Categoría: consola de mezclas
Modelo: PDM-Y801

¿Necesitas ayuda?

Si necesitas ayuda con Power Dynamics PDM-Y801 haz una pregunta a continuación y otros usuarios te responderán




consola de mezclas Power Dynamics Manuales

consola de mezclas Manuales

Últimos consola de mezclas Manuales