Projecta IDC45 Manual de Usario

Projecta cargador de bateria IDC45

Lee a continuación 📖 el manual en español para Projecta IDC45 (16 páginas) en la categoría cargador de bateria. Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/16
45 Amp, 3 Stage Switchmode
INTELLI-CHARGE
DC/SOLAR BATTERY CHARGER
P/No. IDC45
2
WARNINGS
• Explosive gases may escape from the battery during charging.
Prevent flames and sparks and provide adequate ventilation.
• Before charging, read the instructions.
• FOR CHARGING 12 VOLT LEAD ACID BATTERIES ONLY.
• Do not attempt to charge non-rechargeable batteries.
• Never charge a frozen battery.
• Corrosive substances may escape from the battery during charging and damage
delicate surfaces. Store and charge in a suitable area.
• This appliance is not intended for use by young children or infirm persons unless they
have been adequately supervised by a responsible person to ensure that they can use
the appliance safely.
• Fit fuses as close to the batteries as possible to protect the cable in case of
short circuit.
FEATURES
The IDC45 DC-DC charger is purposely designed for charging auxiliary batteries.
It includes all the features needed to maintain the auxiliary battery to its optimum
condition and to prolong the battery life.
SWITCHMODE TECHNOLOGY
The IDC45 converts your vehicle’s 12VDC/24VDC alternator power to the voltage
level allowing your batteries to be fully charged, prolonging battery life and
reliability. With the latest synchronous switching technology, efficiency of IDC45
exceeds 94% at typical full load condition.
DUAL INPUT OPERATION
Allows two energy sources to power the IDC45 simultaneously. Solar input takes
precedence if solar and alternator inputs are present. When solar input cannot provide
enough energy to the load, the IDC45 will draw power from solar and alternator
simultaneously.
SOLAR MPPT
The IDC45 utilises sophisticated MPPT (Maximum Power Point Tracking) solar
regulator technology. MPPT maximises the power generated from the solar panels
to the auxiliary battery.
3
SUPERIOR 3 STAGE CHARGING
Using high speed microcontroller and proprietary charging algorithm, the IDC45
delivers a sophisticated 3 stage charging process resulting in a faster and more
powerful charge, ideal for deep cycle batteries. The first stage, bulk (constant current),
charges the battery faster while the second stage, absorption (constant voltage),
ensures the battery is thoroughly charged. The final stage, float, maintains the battery
at a safe voltage allowing it to be maintained and ready for use indefinitely.
MULTI-CHEMISTRY SUPPORT
The IDC45 supports GEL, AGM, WET and CALCIUM batteries. If the calcium battery
mode is selected, periodic equalisation will be provided to the calcium battery for
removing acid stratification.
IGNITION CONNECTION
The ignition connection activates the lower input voltage operation to suit vehicles
with smart (variable voltage) alternators.
TEMPERATURE COMPENSATION
The IDC45 is supplied with a 2 metre temperature sensor. The sensor monitors the
battery temperature and adjusts (compensates) the charger’s output to prevent
overcharging. This is ideal for batteries used in warmer climates or environments.
REMOTE CHARGER STATUS INDICATION
A pink wire is provided for driving an external panel mount LED indicator (Eg Narva
P/No. 62090BL) to show the status of the charger. It shows whether the auxiliary
battery is on charge (Solid Colour) or the charger is in a fault condition (Flashing).
PROTECTIVE FEATURES
Spark-Free Protection
The IDC45 will not start charging the battery (no output) unless the load is securely
connected. It prevents the output leads from sparking due to accidental short circuit
making the charger safer to use around batteries.
Reverse Connection Protection
Reverse connection on input and output terminals does not damage IDC45 internal
circuit. The IDC45 detects reverse connection condition and indicates whether input
or output connection is reversed.
Over and Under Voltage Protection
The charger will automatically shut down if there is an over voltage or under
voltage problem.
Over Temperature Protection
The charger will lower its output current if the temperature of the unit begins
to overheat.

Especificaciones del producto

Marca: Projecta
Categoría: cargador de bateria
Modelo: IDC45

¿Necesitas ayuda?

Si necesitas ayuda con Projecta IDC45 haz una pregunta a continuación y otros usuarios te responderán


cargador de bateria Projecta Manuales

Projecta

Projecta IC2500W Manual de Usario

16 Septiembre 2024
Projecta

Projecta BLT700 Manual de Usario

13 Septiembre 2024
Projecta

Projecta IDC45 Manual de Usario

7 Agosto 2024
Projecta

Projecta BLT200 Manual de Usario

7 Agosto 2024
Projecta

Projecta IC1000 Manual de Usario

30 Julio 2024
Projecta

Projecta PC800 Manual de Usario

27 Julio 2024

cargador de bateria Manuales

Últimos cargador de bateria Manuales

Nitecore

Nitecore UHX1 PRO Manual de Usario

27 Octubre 2024
Nitecore

Nitecore EMR05 TAC Manual de Usario

26 Octubre 2024
Bosch

Bosch GAA12V-21N Manual de Usario

24 Octubre 2024
Panasonic

Panasonic CF-VCB331 Manual de Usario

24 Octubre 2024
Ryobi

Ryobi One+ RC18627 Manual de Usario

21 Octubre 2024
Alecto

Alecto BL-179 Manual de Usario

19 Octubre 2024
Graupner

Graupner Ultramat 12 Manual de Usario

16 Octubre 2024
Graupner

Graupner ULTRA DUO PLUS 30 Manual de Usario

16 Octubre 2024
MSW

MSW S-CHARGER-20A.2 Manual de Usario

15 Octubre 2024
MSW

MSW S-CHARGER-10A.2 Manual de Usario

15 Octubre 2024