Shadow SH 941 Manual de Usario

Lee a continuación 📖 el manual en español para Shadow SH 941 (1 páginas) en la categoría No categorizado. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/1
Sensor
4. Locate the output socket in a convenient location on the instrument and attach with applied double sided adhesive4. Locate the output socket in a convenient location on the instrument and attach with applied double sided adhesive
1. Test fit sensors into the slot between the wing and foot.
Pickup should t tightly for best output (see g 1).
1. Test fit sensors into the slot between the wing and foot.
Pickup should t tightly for best output (see g 1).
2. If pickup is too loose, shim with included shim material (see fig 2). If pickup is too high, file the bridge slot slightly.2. If pickup is too loose, shim with included shim material (see fig 2). If pickup is too high, file the bridge slot slightly.
3. Install the sensors into the bridge slots.3. Install the sensors into the bridge slots.
5. Connect to appropriate amplifier with instrument cable.5. Connect to appropriate amplifier with instrument cable.
Copper Foil
Tape
Fax: (561) 743 0460
eMail: jjmelch@shadow-pickups.com
Shadow Elektroakustik
Peter-Haendel Straße 2
91334 Hemhofen · Germany
Shadow Electronics of America Inc.
17791 Alexander Run
Jupiter, FL 33478 U.S.A.
Fax: +49 - 91 95 - 92 99 30
eMail: info@shadow-electronics.com
Content:Content:
Fig. 2Fig. 2
Fig. 1Fig. 1
Violin Twin Bridge Pickup,
Cable holder,
Integrated Volume and tone control,
12 foot cable,
Copper Foil Tape
Violin Twin Bridge Pickup,
Cable holder,
Integrated Volume and tone control,
12 foot cable,
Copper Foil Tape
Installation Instruction for Shadow SH 941
Violin Twin Bridge Pickups
Note:
Piezo pickups and transducers have a very high output impedance. In order to get the optimum sound output we recommend
an amplier with low impedance input.
Note:
Piezo pickups and transducers have a very high output impedance. In order to get the optimum sound output we recommend
an amplier with low impedance input.

Especificaciones del producto

Marca: Shadow
Categoría: No categorizado
Modelo: SH 941

¿Necesitas ayuda?

Si necesitas ayuda con Shadow SH 941 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Shadow Manuales

No categorizado Manuales

Últimos No categorizado Manuales