Shadow SH945 NFX-V Manual de Usario

Shadow No categorizado SH945 NFX-V

Lee a continuación 📖 el manual en español para Shadow SH945 NFX-V (1 páginas) en la categoría No categorizado. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/1
Installation Instruction for SH 945 NFX
NANOFLEX Violin Pickup System
Content:
Nanoex pickup with shielded cable and 2.5mm plug
Control unit with holder and 6.3mm output jack
3-Volt battery
1. Loosen strings, so that the bridge can be raised a few millimeters easily.
2. Do not alter the pickup. Lift bridge up. Place pickup between bridge feet and body so that the cable
points toward the tailpiece of the instrument (see Fig. 1).
3. The pickups has to be centered under the feet to guarantee optimized sound transfer. Take care,
that there is no unevenness/roughness (dirt, dust, concavities on top of instrument or bottom of
bridge).
4. Tune your instrument.
5. Install the control unit on an suitable place between chinrest holder and F-holes on the left side of
your instrument. The installation principle is the same as on your chinrest holder.
6. Place supplied 3V battery into control unit. Note correct polarization.
7. Plug pickup-cable into the 2.5mm input jack of the control unit.
8. Connect to appropriate amplier with instrument cable.
Pickup
Pickup Cable
Fax: (561) 743 0460
eMail: USA@shadow-electronics.com
Shadow Electronics of America Inc.
17791 Alexander Run
Jupiter, FL 33478 U.S.A.
Shadow Elektroakustik
Peter-Haendel Straße 2
91334 Hemhofen · Germany Fax: +49 - 91 95 - 92 99 30
eMail: info@shadow-electronics.com
For more information please check: http://www.shadow-electronics.com

Especificaciones del producto

Marca: Shadow
Categoría: No categorizado
Modelo: SH945 NFX-V

¿Necesitas ayuda?

Si necesitas ayuda con Shadow SH945 NFX-V haz una pregunta a continuación y otros usuarios te responderán




No categorizado Shadow Manuales

No categorizado Manuales

Últimos No categorizado Manuales