Shelly 1 Manual de Usario

Shelly No categorizado 1

Lee a continuación 📖 el manual en español para Shelly 1 (2 páginas) en la categoría No categorizado. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/2
The Embedded Web Interface
Еven without the mobile app, Shelly can be set and controlled
through a browser and WiFi connection of a mobile phone,
tablet or PC.
ABBREVIATIONS USED:
Shelly-ID 6– the unique name of the Device. It consists of
or more characters. It may include numbers and letters, for
example 35FA58.
SSID – the name of the WiFi network, created by the Device,
for example shelly1-35FA58.
Access Point (AP) – the mode in which the Device creates its
own WiFi connection point with the respective name (SSID).
Client Mode (CM) – the mode in which the Device is connect-
ed to another WiFi network.
Initial inclusion
Step 1
Install Shelly to the power grid following the schemes de-
scribed above and place it into the console. After turning the
power on Shelly will create its own WiFi network (AP).
WARNING: If you do not see an active WiFi network
with SSID like shelly1-35FA58, reset the Device. If
the Device has been powered on, you have to restart by pow-
ering it off and on again. After turning the power on, you have
one minute to press 5 consecutive times the button/switch
connected to SW. You have to hear the Relay trigger itself.
After the trigger sound, Shelly should return to AP Mode. If
not, please repeat or contact our customer support at: sup-
port@Shelly.cloud
Step 2
When Shelly has created an own WiFi network (own AP), with
name (SSID) such as shelly1-35FA58. Connect to it with your
phone, tablet or PC.
Step 3
Type 192.168.33.1 into the address eld of your browser to
load the web interface of Shelly.
General - Home Page
This is the home page of the embedded web interface. If it
has been set up is correctly, you will see information about:
• Settings menu button
• Current state (on/off)
• Present time
Settings – General Settings
In this menu, you can congure the Shelly device’s work and
connection modes.
WiFi Settings – the WiFi connection settings.
Access Point (AP) Mode: allows the Device to operate as a
WiFi access point. The User can change the name (SSID) and
the password to access the AP. After you have entered the
desired settings, press .Connect
WiFi Client Mode (CM): allows the Device to connect to an
available WiFi network. In order to switch to this mode, the
User must enter the name (SSID) and the password to con-
nect to a local WiFi network. After entering the correct details,
press .Connect
ATTENTION! If you have entered incorrect informa-
tion (wrong settings, usernames, passwords etc.),
you will not be able to connect to Shelly and you have to re-
set the Device.
WARNING: If you do not see an active WiFi net-
work with SSID like shelly1-35FA58, reset the De-
vice. If the Device has been powered on, you have to restart
by powering it off and on again. After turning the power on,
you have one minute to press 5 consecutive times the but-
ton/switch connected to SW. You have to hear the Relay
trigger itself. After the trigger sound, Shelly should return to
AP Mode. If not, please repeat or contact our customer sup-
port at: support@Shelly.cloud
Login: Access to the Device
Leave Unprotected - removing the notication for disabled
authorization.
Enable Authentication – you can turn authentication on or
off
This is where you can change your username and password.
You must enter a new username and the new password, then
press to save the changes.Save
Connect to Cloud: you can turn the connection between
Shelly and Shelly Cloud on or off.
Factory reset: Return Shelly to its factory settings.
Firmware Upgrade: Shows present rmware version. If a
newer version is available, you can update your Shelly Device
by clicking Update.
Device Reboot: Reboots the Device.
Managing in Relay Mode
Relay Screen
In this screen you can control, monitor and change the set-
tings for turning the power on and off. You can also see the
current status of the connected appliance to Shelly, Buttons
Settings, On and OFF.
To control Shelly press Relay:
To turn on the connected circuit press “Turn ON”.
To turn off the connected circuit press “Turn OFF”
Press the icon to go to the previous menu.
Shelly Management Settings
Each Shelly can be congured individually. This lets you per-
sonalize each Device in a unique manner, or consistently, as
you choose.
Power On Default State
This sets the relays’ default state when powered from the
power grid.
ON: By default when the Device is powered and the connect-
ed circuit/appliance to it will be powered as well.
OFF: By default the Device and any connected circuit/appli-
ance will not be powered, even when it is connected to the grid.
Restore Last State: By default the Device and the connected
circuit/appliance will be returned to the last state they occu-
pied (on or off) before the last power off/shutdown.
Auto ON/OFF
Automatic powering/shutdown of the socket and the con-
nected appliance:
Auto OFF after: After turning on, the power supply will be
automatically shut down after a predened time (in seconds).
A value of 0 will cancel the automatic shutdown.
Auto ON after: After turning off, the power supply will be au-
tomatically turned on after a predened time (in seconds). A
value of 0 will cancel the automatic start.
Manual Switch Type
• Momentary – When using a button.
• Toggle Switch – When using a switch.
• Edge switch - Change status on every hit.
Sunrise/Sunset hours
This function requires an Internet connection. To
use Internet, a Shelly Device has to be connected to
a local WiFi network with а working Internet connection.
Shelly receives actual information through the Internet about
the time of sunrise and sunset in your area. Shelly may turn
on or off automatically at sunrise/sunset, or at a specied
time before or after sunrise/sunset.
On/Off schedule
This function requires an Internet connection. To
use Internet, a Shelly Device has to be connected to
a local WiFi network with working internet connection.
Shelly may turn on/off automatically at a predened time.
Shelly may turn on/off automatically at a predefined time.
Manufacturer: Allterco Robotics EOOD
Address: Soa, 1404, 109 Bulgaria Blvd., . 8
Tel.: +359 2 988 7435
E-mail: support@shelly.cloud
http://www.Shelly.cloud
The Declaration of Conformity is available at:
https://Shelly.cloud/declaration-of-conformity/
Changes in the contact data are published by the Manufac-
turer at the ocial website of the Device:
http://www.Shelly.cloud
The User is obliged to stay informed for any amendments of
these warranty terms before exercising his/her rights against
the Manufacturer.
All rights to trademarks She® and Shelly® , and other intel-
lectual rights associated with this Device belong to Allterco
Robotics EOOD.
2018/08/v01
Step 4:
Approximately 30 seconds after discovery of any new Devic-
es оn the local WiFi network, а list will be displayed by default
in the “Discovered Devices” room.
Step 5:
Enter Discovered Devices and choose the Device you want to
include in your account.
Step 6:
Enter a name for the Device (in the Device Name eld). Choose a
Room, in which the Device has to be positioned. You can choose
an icon or add a picture to make it easier to recognize. Press
“Save Device”.
Step 7:
To enable connection to the Shelly Cloud service for remote
control and monitoring of the Device, press “YES” on the fol-
lowing pop-up.
Shelly Devices Settings
After your Shelly device is included in the application, you can
control it, change its settings and automate the way it works.
To switch the Device on and off, use the respective ON/OFF
button.
To enter at the details menu of the respective Device, simply
click on it’s name.
From the details menu you may control the Device, as well as
edit its appearance and settings.
EDIT DEVICE – allows you to change the Device’s name, room
and picture.
DEVICE Settings – allows you to change settings. For ex-
ample, with Restrict login you may enter a username and
password to restrict access to the embedded web interface
in Shelly. You may automate the Device operations from this
menu as well.
Timer
Тo manage the power supply automatically, you may use:
Auto OFF: After turning on, the power supply will automatically
shutdown after a predened time (in seconds). A value of 0 will
cancel the automatic shutdown.
Auto On: After turning off, the power supply will be automati-
cally turned on after a predened time (in seconds). A value of
0 will cancel the automatic power-on.
Weekly schedule
This function requires an Internet connection. To
use Internet, a Shelly Device has to be connected to
a local WiFi network with working internet connection.
Shelly may turn on/off automatically at a predened time and
day throughout the week. You may add unlimited number of
weekly schedules.
Sunrise/Sunset
This function requires an Internet connection. To
use Internet, a Shelly Device has to be connected to
a local WiFi network with а working Internet connection.
Shelly receives actual information through the Internet about
the time of sunrise and sunset in your area. Shelly may turn on
or off automatically at sunrise/sunset, or at a specied time
before or after sunrise/sunset.
Settings:
Power On Default Mode
Тhis setting controls whether the Device will supply power
or not the output as a default whenever it is receiving power
from the grid:
ON: When the Device is powered, by default the socket will
be powered.
OFF: Even if the Device is powered, by default the socket will
not be powered.
Restore Last Mode: When power is restored, by default, the
appliance will return to the last state it was in before the last
power off/shutdown.
Button Type
• Momentary - Set Shelly input to be buttons. Push for ON,
push again for OFF.
• Toggle Switch - Set Shelly input to be ip switches, with
one state for ON and another state for OFF.
Firmware Update: Shows present rmware version. If a new-
er version is available, you can update your Shelly Device by
clicking Update.
Factory reset: Remove Shelly from your account and return
it to its factory settings.
Device Information: Here you can see the unique ID of Shelly
and the IP it got from the Wi-Fi network.

Especificaciones del producto

Marca: Shelly
Categoría: No categorizado
Modelo: 1

¿Necesitas ayuda?

Si necesitas ayuda con Shelly 1 haz una pregunta a continuación y otros usuarios te responderán


No categorizado Shelly Manuales

Shelly

Shelly 1 Manual de Usario

13 Septiembre 2024
Shelly

Shelly Smoke Plus Manual de Usario

13 Septiembre 2024
Shelly

Shelly BLU Motion Manual de Usario

13 Septiembre 2024
Shelly

Shelly Plus 1PM Mini Manual de Usario

13 Septiembre 2024
Shelly

Shelly 2.5 Manual de Usario

13 Septiembre 2024
Shelly

Shelly Pro 1 Manual de Usario

13 Septiembre 2024
Shelly

Shelly EM Manual de Usario

13 Septiembre 2024

No categorizado Manuales

Últimos No categorizado Manuales

POLARIS

POLARIS RZR S 1000 EPS (2018) Manual de Usario

27 Octubre 2024
Workzone

Workzone 20V Li-Ion Reciprocating Saw PT160501 Manual de Usario

27 Octubre 2024
Philips

Philips 43PUL7672 Manual de Usario

27 Octubre 2024
Manhattan

Manhattan 461504 Manual de Usario

27 Octubre 2024
Sungrow

Sungrow SG125HV Manual de Usario

27 Octubre 2024
Schneider

Schneider CCT724319 Manual de Usario

27 Octubre 2024
Technoline

Technoline WS 250 Manual de Usario

27 Octubre 2024
Livarno

Livarno IAN 354423 Manual de Usario

27 Octubre 2024
Kupper

Kupper 12152 Manual de Usario

27 Octubre 2024
JennAir

JennAir CARBON24L Manual de Usario

27 Octubre 2024