Shelly EM Manual de Usario

Shelly No categorizado EM

Lee a continuación 📖 el manual en español para Shelly EM (4 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/4

USER GUIDE

2 Channel WiFi Energy Meter

LEGEND:

N - Neutral input (110-230V AC);

L - Line input (110-230V AC);

O - Output for contactor control (max 2A);

P1+ - Positive connection of current transformer 1

P1- - Negative connection of current transformer 1

P2+ - Positive connection of current transformer 2

P2- - Negative connection of current transformer 2

The Dual WiFi Energy Meter, Shelly® EM by Allterco Robotics

is intended to be mounted into a standard in-wall console or

next to the breakers, in order to monitor the electric power

through it, independent for each channel and heavy-duty con-

tactor control. Shelly may work as a standalone Device or as

an accessory to a home automation controller.

• Purpose of control: Operating

• Construction of control: Independently mounted

• Type 1.B Action

• Pollution Degree 2

• Impulse Voltage: 4000 V

Power supply:

110-230V ±10% 50/60Hz AC

Max measurement per channel:

120A/230V

Relay Max Load:

2A/230V

Complies with EU standards:

-RE Directive 2014/53/EU

-LVD 2014/35/EU

-EMC 2004/108/WE

-RoHS2 2011/65/UE

Working temperature:

– 40°C up to 40°C

Radio signal power:

1mW

Radio protocol:

WiFi 802.11 b/g/n

Frequency:

2400 – 2500 MHz;

Operational range (depending on local construction):

-up to 50 m outdoors

-up to 30 m indoors

Dimensions(HxWxL):

39 x 36 x 17 mm

Electrical consumption:

< 1 W

Technical Information

• Control through WiFi from a mobile phone, PC, automation

system or any other Device supporting HTTP and/or UDP

protocol.

• Microprocessor management.

CAUTION! Danger of electrocution. Mounting the Device

to the power grid has to be performed with caution.

CAUTION! Do not allow children to play with the button/

switch connected the Device. Keep the Devices for remote

control of Shelly (mobile phones, tablets, PCs) away from

children.

Introduction to Shelly®

Shelly® is a family of innovative Devices, which allow remote

control of electric appli-ances through mobile phone, PC or

home automation system. Shelly® uses WiFi to connect to

the devices controlling it. They can be in the same WiFi net-

work or they can use remote access (through the Internet).

Shelly® may work standalone, without being managed by a

home automation controller, in the local WiFi network, as well

as through a cloud service, from everywhere the User has

Internet access.

Shelly® has an integrated web server, through which the User

may adjust, control and monitor the Device. Shelly

® has two

WiFi modes - access Point (AP) and Client mode (CM). To

operate in Client Mode, a WiFi router must be located within

the range of the Device. Shelly

® devices can communicate

directly with other WiFi devices through HTTP protocol.

An API can be provided by the Manufacturer. Shelly

® devices

may be available for monitor and control even if the User is

outside the range of the local WiFi network, as long as the

WiFi router is connected to the Internet. The cloud function

could be used, which is activated through the web server of

the Device or through the settings in the Shelly Cloud mobile

application.

The User can register and access Shelly Cloud, using either

Android or iOS mobile applications, or any internet browser

and the web site: https://my.Shelly.cloud/.

Installation Instructions

CAUTION! Danger of electrocution! The mounting/ in-

stallation of the Device should be done by a qualied person

(electrician).

CAUTION! Danger of electrocution! Do not connect the

current transformer clamp to the Line, before wiring it to

Shelly EM. Even if only the current transformer is connected,

there might be high voltage accross its connection cables.

CAUTION! Danger of electrocution. Even when the Device

is turned off, it is possible to have voltage across its clamps.

Every change in the connection of the clamps has to be done

after ensuring all local power is powered off/disconnected.

-CAUTION! Do not connect the Device to appliances ex

ceeding the given max load!

CAUTION! Connect the Device only in the way shown in

these instructions. Any other method could cause damage

and/or injury.

CAUTION! Before beginning the installation please read

the accompanying documentation carefully and completely.

Failure to follow recommended procedures could lead to mal-

function, danger to your life or violation of the law. Allterco

Robotics is not responsible for any loss or damage in case of

incorrect installation or operation of this Device.

CAUTION! Use the Device only with power grid and ap-

pliances which comply with all applicable regulations. short

circuit in the power grid or any appliance connected to the

Device may damage the Device.

RECOMMENDATION: Тhe Device may be connected to

and may control electric circuits and appliances only if they

comply with the respective standards and safety norms.

Initial Inclusion

Before installing/mounting the Device ensure that the grid is

powered off (turned down breakers).

Connect Shelly EM to the power grid and install it in the con-

sole following the scheme that suites the desired purpose.

You may choose if you want to use Shelly with the Shelly

Cloud mobile application and Shelly Cloud service. You can

also familiarize yourself with the instructions for Manage-

ment and Control through the embedded Web interface.

Control your home with your voice

All Shelly devices are compatible with Amazon Echo and

Google Home.

Please see our step-by-step guide on:

https://shelly.cloud/compatibility/Alexa

https://shelly.cloud/compatibility/Assistant

MOBILE APPLICATION FOR

MANAGMENT OF SHELLY®

Shelly Cloud gives you opportunity to control and adjust all

Shelly® Devices from anywhere in the world.

You only need an internet connection and our mobile applica-

tion, installed on your smartphone or tablet.

To install the application please visit Google Play (Android - g.

3) or App Store (iOS - g. 4) and install the Shelly Cloud app.

Registration

The rst time you load the Shelly Cloud mobile app, you have to

create an account which can manage all your Shelly

® devices.

Forgotten Password

In case you forget or lose your password, just enter the e-mail

address you have used in your registration. You will then re-

ceive instructions to change your password.

WARNING! Be careful when you type your e-mail address

during the registration, as it will be used in case you forget

your password.

After registering, create your rst room (or rooms), where you

are going to add and use your Shelly devices.

Shelly Cloud gives you opportunity to create scenes for auto-

matic turning on or off of the Devices at predened hours or

based on other parameters like temperature, humidity, light

etc. (with available sensor in Shelly Cloud).

Shelly Cloud allows easy control and monitoring using a mo-

bile phone, tablet or PC.

Device Inclusion

To add a new Shelly device, install it to the power grid fol-

lowing the Installation Instructions included with the Device.

Step 1

After the installation of Shelly in the console behind the pow-

er socket/light switch and the power is turned on Shelly will

create its own WiFi Access Point (AP).

WARNING: In case the Device has not created its own WiFi

network with SSID like shellyem-35FA58 check if you have

connected Shelly correctly by the schemes described above.

If you do not see an active WiFi network with SSID like shelly-

em-35FA58, reset the Device. In order to reset the device,

you will need physical access to it. On the back of the device,

you will see a button. Press and hold it for 10 seconds. Shelly

should return to AP Mode. If not, please repeat or contact our

customer support at: support@Shelly.cloud

Step 2

Choose “Add Device”.

In order to add more Devices later, use the app menu at the

top right corner of the main screen and click “Add Device”.

Type the name (SSID) and password for the WiFi network, to

which you want to add the Device.

Step 3

If using iOS: you will see the following screen:

Press the home button of your iPhone/iPad/iPod. Open

Settings > WiFi and connect to the WiFi network created by

Shelly, e.g. shellysem-35FA58.

If using Android: your phone/tablet will automatically scan

and include all new Shelly Devices in the WiFi network that

you are connected to.

Upon successful Device Inclusion to the WiFi network you will

see the following pop-up:

Step 4:

Approximately 30 seconds after discovery of any new Devic-

es оn the local WiFi network, а list will be displayed by default

in the “Discovered Devices” room.

Specication

120A 50A

NOLP2-P2+P1-P1+

g. 3 g. 4

The Embedded Web Interface

Еven without the mobile app, Shelly can be set and controlled

through a browser and WiFi connection of a mobile phone,

tablet or PC.

ABBREVIATIONS USED:

Shelly-ID – the unique name of the Device. It consists of 6

or more characters. It may include numbers and letters, for

example 35FA58.

SSID – the name of the WiFi network, created by the Device,

for example Shellyem-35FA58.

Access Point (AP) – the mode in which the Device creates its

own WiFi connection point with the respective name (SSID).

Client Mode (CM) – the mode in which the Device is connect-

ed to another WiFi network.

Installation/Initial inclusion

Step 1

Install Shelly to the power grid following the schemes de-

scribed above and place it into the console. After turning the

power on Shelly will create its own WiFi network (AP).

WARNING: In case the Device has not created its own WiFi

network with SSID like shellyem-35FA58 check if you have

connected Shelly correctly by the schemes described above.

If you do not see an active WiFi network with SSID like shelly-

em-35FA58, reset the Device. In order to reset the device, you

will need physical access to it. On the back of the device, you

will see a button. Press and hold it for 10 seconds. Shelly

should return to AP Mode. If not, please repeat or contact our

customer support at: support@Shelly.cloud

Step 2

When Shelly has created an own WiFi network (own AP), with

name (SSID) such as Shellyem-35FA58. Connect to it with

your phone, tablet or PC.

Step 3

Type 192.168.33.1 into the address eld of your browser to

load the web interface of Shelly.

General - Home Page

This is the home page of the embedded web interface.

Here you will see information about:

• Current electrical consumption of Channel 1

• Power Factor of Channel 1

• Current electrical consumption of Channel 2

• Power Factor of Channel 2

• Voltage

• Power Button

• Connection to Cloud

• Present time

• Settings

Timer

To manage the power supply automatically, you may use:

Auto OFF: After turning on, the power supply will automatical-

ly shutdown after a predened time (in seconds). A value of

0 will cancel the timer.

Auto ON: After turning off, the power supply will be automat-

ically turned on after a predened time (in seconds). A value

of 0 will cancel the timer.

Weekly Schedule

This function requires an internet connection.

Shelly receives actual information about the time of sunrise

and sunset in your area.

Shelly may turn on/off automatically at a predened time, at

sunrise/sunset, or at a specied time before or after sunrise/

sunset.

Internet/Security

WiFi Mode - Client: Allows the device to connect to an avail-

able WiFi network. After typing the details in the respective

elds, press Connect.

WiFi Client Backup: Allows the device to connect to an al-

ternative WiFi network, if the primary is not available. After

typing the details in the respective elds, press Set.

WiFi Mode - Access Point: Congure Shelly to create a Wi-Fi

Access point. After typing the details in the respective elds,

press Create Access Point.

Restrict Login: Restrict the web interface of Shelly with a

Username and Password. After typing the details in the re-

spective elds, press Restrict Shelly.

SNTP Server: You can change the default SNTP server. Enter

the address, and click Save.

Advanced - Developer Settings: Here you can change the

action execution:

• Via CoAP (CoIOT)

• Via MQTT

Cloud: Enable or Disable connection to the Cloud service.

Settings

Power On Default Mode

This sets the default output state when Shelly is powered.

ON: Congure Shelly to turn ON, when it has power.

OFF: Congure Shelly to turn OFF, when it has power. Restore

Last Mode: Congure Shelly to return to last state it was in,

when it has power.

Current Transformer Type:

You can select the type of current transformer that you are

using.

Firmware Update

Update the rmware of Shelly, when a new version is re-

leased.

Time Zone and Geo-location

Enable or Disable the automatic detection of Time Zone and

Geo-location.

Set Date/Time

You can manually set the Date and time for your Shelly device.

Factory Reset: Return Shelly to its factory default settings.

Device Reboot: Reboots the Device.

Device Info: Shows your device ID.

In Client Mode shows also your WiFi network name and WiFi

signal strength.

Description of Shelly EM values:

1. Power Consumption

This is the power which is actually consumed or utilized in an

AC Circuit is called True power, Active power or Real power.

It is measured in kilo watt (kW) or mega Watt (MW). It is the

actual outcomes of the electrical system which runs the elec-

tric circuits or loads. This is the energy which you are paying.

It is shown in blue color in the history graph.

If you have solar panel and sell energy, you will see this power

with “negative” value. It is shown in green color in the history

graph.

2. Reactive power:

This is the power that ows back and forth, it moves in both

the direction in the circuit or react upon itself. The Reac-

tive power is measured in Volt-Ampere reactive (VAR), Kilo

Volt-Ampere reactive (VAR) or Mega Volt-Ampere reactive

(MVAR). You are not being charged for this energy.

3. Power Factor:

The power factor of an AC electrical circuit is dened as the

ratio of the real power absorbed by the load to the apparent

power owing in the circuit, and is a dimensionless number

in the closed interval of −1 to 1. A power factor of less than 1

indicates the voltage and current are not in phase, reducing

the instantaneous product of the two. In a perfect situation

the Power Factor is close to 1.

4. Voltage:

Voltage, also called electromotive force, is a quantitative ex-

pression of the potential difference in charge between two

points in an electrical eld.

You can download your history by going to

https://my.shelly.cloud/ in a browser on a PC.

Manufacturer: Allterco Robotics EOOD

Address: Soa, 1407, 103 Cherni Vrah Blvd.

Tel.: +359 2 988 7435

E-mail: support@shelly.cloud

http://www.Shelly.cloud

The Declaration of Conformity is available at:

https://Shelly.cloud/declaration-of-conformity/

Changes in the contact data are published by the Manufac-

turer at the ocial website of the Device:

http://www.shelly.cloud

The User is obliged to stay informed for any amendments of

these warranty terms before exercising his/her rights against

the Manufacturer.

All rights to trademarks of Shelly® , and other intellectual

rights associated with this Device belong to Allterco Robotics

EOOD.

Details menu

Here you will see the momentary:

• Consumption - in Watts

• Voltage -in Volts

• Reactive power – in Volt-Ampere Reactive (VAR)

• Power Factor – in the range of -1 to 1

Below that you will see the history graph for the last year for:

• Consumption*

• Voltage –with a lowest and highest measurement

*If you have connected your solar panel to Shelly EM, it will be

shown in green color.

Settings

Timer

Manage the power supply automatically:

Auto OFF: After turning on, the power supply will automati-

cally shutdown after a predened time (in seconds). A value

of 0 will cancel the timer.

Auto ON: After turning off, the power supply will be automat-

ically turned on after a predened time (in seconds). A value

of 0 will cancel the timer.

Weekly Schedule

This function requires an internet connection.

Shelly receives actual information about the time of sunrise

and sunset in your area.

Shelly may turn on/off automatically at a predened time, at

sunrise/sunset, or at a specied time before or after sunrise/

sunset.

Internet/Security

WiFi Mode - Client: Allows the device to connect to an avail-

able WiFi network. After typing the details in the respective

elds, press Connect.

WiFi Client Backup: Allows the device to connect to an al-

ternative WiFi network, if the primary is not available. After

typing the details in the respective elds, press Set.

WiFi Mode - Access Point: Congure Shelly to create a Wi-Fi

Access point. After typing the details in the respective elds,

press Create Access Point.

Cloud: Enable or Disable connection to the Cloud service.

Restrict Login: Restrict the web interface of Shely with a

Username and Password. After typing the details in the re-

spective elds, press Restrict Shelly.

Settings

Current Transformer Type:

You can select the type of current transformer that you are using.

Power On Default Mode

This sets the default output state when Shelly is powered.

ON: Congure Shelly to turn ON, when it has power.

OFF: Congure Shelly to turn OFF, when it has power. Restore

Last Mode: Congure Shelly to return to last state it was in,

when it has power.

Firmware Update

Update the rmware of Shelly, when a new version is released.

Time Zone and Geo-location

Enable or Disable the automatic detection of Time Zone and

Geo-location.

Factory Reset

Return Shelly to its factory default settings.

Device Information

Here you can see the:

• Device ID - Unique ID of Shelly

• Device IP - The IP of Shelly in your Wi-Fi network

• Device Type – The type of your Shelly device

• WiFi Name – the Name (SSID) of the WiFi network to which

your Shelly is connected

• WiFi Signal - the Signal strength of the WiFi network to

which your Shelly is connected

Edit Device

From here you can edit:

• Device Name

• Device Room

• Device Picture

When you are done, press Save Device.

Some of the features of the Shelly Cloud mobile application

are available at https://my.shelly.cloud/ as well.

Step 5:

Enter Discovered Devices and choose the Device you want to

include in your account.

Step 6:

Enter a name for the Device (in the Device Name eld). Choose a

Room, in which the Device has to be positioned. You can choose

an icon or add a picture to make it easier to recognize. Press

“Save Device”.

Step 7:

To enable connection to the Shelly Cloud service for remote

control and monitoring of the Device, press “YES” on the fol-

lowing pop-up.

Shelly Devices Settings

After your Shelly device is included in the app, you can control

it, change its settings and automate the way it works.

To switch the relay of the Device on and off, use the respec-

tive Power button. To enter at the Details menu of the respec-

tive Device, simply click on its name. From the details menu

you may control the Device, as well as edit its appearance

and settings.

Especificaciones del producto

Marca:	Shelly
Categoría:	No categorizado
Modelo:	EM

¿Necesitas ayuda?

Si necesitas ayuda con Shelly EM haz una pregunta a continuación y otros usuarios te responderán

Tu nombre*

Tu correo electrónico*

Escribe tu pregunta aquí

No categorizado Shelly Manuales

Shelly 1 Manual de Usario

13 Septiembre 2024

Shelly Smoke Plus Manual de Usario

13 Septiembre 2024

Shelly BLU Motion Manual de Usario

13 Septiembre 2024

Shelly Plus 1PM Mini Manual de Usario

13 Septiembre 2024

Shelly 2.5 Manual de Usario

13 Septiembre 2024

Shelly Pro 1 Manual de Usario

13 Septiembre 2024

Shelly EM Manual de Usario

13 Septiembre 2024

No categorizado Manuales

Últimos No categorizado Manuales

POLARIS RZR S 1000 EPS (2018) Manual de Usario

27 Octubre 2024

Workzone 20V Li-Ion Reciprocating Saw PT160501 Manual de Usario

27 Octubre 2024

Philips 43PUL7672 Manual de Usario

27 Octubre 2024

Manhattan 461504 Manual de Usario

27 Octubre 2024

Sungrow SG125HV Manual de Usario

27 Octubre 2024

Schneider CCT724319 Manual de Usario

27 Octubre 2024

Technoline WS 250 Manual de Usario

27 Octubre 2024

Livarno IAN 354423 Manual de Usario

27 Octubre 2024

Kupper 12152 Manual de Usario

27 Octubre 2024

JennAir CARBON24L Manual de Usario

27 Octubre 2024