SSV Works BR-B65 Manual de Usario

SSV Works Vocero BR-B65

Lee a continuación 📖 el manual en español para SSV Works BR-B65 (3 páginas) en la categoría Vocero. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/3
BR-B65
2021+ Ford Bronco
6.5” Rear Speaker-Pod Add-Ons
SSV WORKS, 201 N. Rice Ave Unit A, Oxnard, CA 93030
www.SSVworks.com | Phone: 818-991-1778 | Fax: 866-293-6751
!
Please read and understand these
instructions completely before
installation to avoid possible injury, or
damage to the accessory or vehicle.
WARRANTY INFORMATION:
All SSV Works enclosures are covered by a limited lifetime warranty against defects
in material or workmanship. All SSV Works Electronics are covered by a limited 1 year
warranty against defects in material or workmanship. All SSV Works Speakers are
covered by a limited 1 year warranty against defects in material or workmanship. Labor
for replacement of defective components is not covered. Contact SSV Works for further
warranty information.
1. BR-B65U Enclosures (1 pair)
2. T-25 Torx Screws x 4
(Factory Screws)
TOOLS NEEDED FOR INSTALLATION PARTS LIST
PARTS LIST IMAGES
3. Phillips Screw x 2
4. M6 Screws
and Washers x 2
2. T-25 Torx Screws p1-x4
(Factory Provided)
1. BR-B65-U Enclosures
(1 pair)
3. Phillips Screw x 2 4. M6 Screws and
Washers x 2
- #1 Phillips Screwdriver - T-25 Torx bit
- T-30 Torx bit
B. Remove the 3rd screw located at the bottom of the speaker
pod bolting the pod to the frame.
BR-B65
B
© 2022 SSV Works, Oxnard, CA 93030 BR-B65 Rev. A 12-02-22
A. Remove the two screws securing the top mounting bracket
to the factory speaker pod. These are hard to remove with a
hardtop we recommend using an angle driver.
Note: These two screws will be re-used for the SSV pods.
A
DISASSEMBLY
C. Use the provided Philips screw to secure the cover in place. D. Loosely assemble the bottom of the pod to the frame of the
vehicle using the provided M6 screw and washer.
B. Snap the speaker pod harness cover onto the pod making
sure the harness exits the cover through one of the two reliefs.
C D
B
A. Hold the pod up near its mounting location and connect the
pod to the factory harness.
A
INSTALLATION
BR-B65 © 2022 SSV Works, Oxnard, CA 93030 BR-B65 Rev. A 12-02-22
E. Use the factory screws that were removed in Step A to secure the
top of the enclosure.
F. Go back and tighten the bottom M6 screw.
E F
G. Repeat these steps on the driver side.

Especificaciones del producto

Marca: SSV Works
Categoría: Vocero
Modelo: BR-B65

¿Necesitas ayuda?

Si necesitas ayuda con SSV Works BR-B65 haz una pregunta a continuación y otros usuarios te responderán


Vocero SSV Works Manuales

SSV Works

SSV Works BR-2B65U Manual de Usario

5 Septiembre 2024
SSV Works

SSV Works BR-B65 Manual de Usario

5 Septiembre 2024
SSV Works

SSV Works WP-RZO + 2 Manual de Usario

5 Septiembre 2024
SSV Works

SSV Works RG4-SB10 Manual de Usario

5 Septiembre 2024
SSV Works

SSV Works BR-2B65A Manual de Usario

5 Septiembre 2024
SSV Works

SSV Works X3-US10 Manual de Usario

5 Septiembre 2024
SSV Works

SSV Works US2-C65 Manual de Usario

5 Septiembre 2024
SSV Works

SSV Works RZ4-3KRC Manual de Usario

5 Septiembre 2024
SSV Works

SSV Works RG4-F65K Manual de Usario

5 Septiembre 2024
SSV Works

SSV Works RZ3-1KRC Manual de Usario

5 Septiembre 2024

Vocero Manuales

Últimos Vocero Manuales

Continental Edison

Continental Edison CELED53HP20V2B4 Manual de Usario

27 Octubre 2024
Canton

Canton Vento 830.2 Manual de Usario

27 Octubre 2024
Jamo

Jamo S7-25C Manual de Usario

27 Octubre 2024
Bowers Wilkins

Bowers Wilkins 707 S2 Manual de Usario

27 Octubre 2024
Monacor

Monacor GLS-301/GR Manual de Usario

27 Octubre 2024
Monitor Audio

Monitor Audio Silver C150 Manual de Usario

26 Octubre 2024
FBT

FBT MITUS 210M Manual de Usario

26 Octubre 2024
CyberData Systems

CyberData Systems SIP 011398 Manual de Usario

26 Octubre 2024
Lamax

Lamax PartyGo1 Play Manual de Usario

26 Octubre 2024
IKEA

IKEA SYMFONISK 405.847.50 Manual de Usario

26 Octubre 2024