Sun Joe 20VION-CS10-RM Manual de Usario
Sun Joe
máquina de aserrar
20VION-CS10-RM
Lee a continuación 📖 el manual en español para Sun Joe 20VION-CS10-RM (28 páginas) en la categoría máquina de aserrar. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/28
© 2021 by Snow Joe
®, LLC
All rights reserved. Original instructions. SAVE THESE INSTRUCTIONS
A Division of Snow Joe
®, LLC
OPERATOR’S MANUAL
Model 20ViON-CS10-RM Form No. SJ-20ViON-CS10-RM-880E-M-V1
RCORDLESS CHAIN SAW
20 VOLT | 10-INCH
1
© 2021 by Snow Joe
®, LLC
All rights reserved. Original instructions. SAVE THESE INSTRUCTIONS
A Division of Snow Joe
®, LLC
OPERATOR’S MANUAL
Model 20ViON-CS10-RM Form No. SJ-20ViON-CS10-RM-880E-M-V1
RCORDLESS CHAIN SAW
20 VOLT | 10-INCH
2
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Read all the instructions contained in this manual. Keep this
manual in a safe place, so that the information is available at
all times. If you give the equipment to another person, make
sure to provide these operating instructions. Basic safety
precautions should always be followed to reduce the risk of
re, electric shock, and personal injury.
mDANGER! This indicates a hazardous situation, which,
if not followed, will result in serious injury or death.
mWARNING! This indicates a hazardous situation, which,
if not avoided, could result in serious injury or death.
mCAUTION! This indicates a hazardous situation, which,
if not avoided, could result in minor or moderate injury.
Intended Use
This cordless chain saw was designed and manufactured for
trimming and pruning tree limbs and branches and for cutting
smaller logs up to recommended 7.9 inch (20 cm), not to
exceed a max cut of 9.5 in. (24 cm) in diameter depending on
type of wood. All of the wooden objects intended to be cut
with this chain saw should be no thicker than the guide bar's
maximum cutting capabilities.
Improper Use
Any other use diering from the above mentioned applications
poses a serious hazard to the user and may damage both the
tool and your personal property. Examples of improper use
include, but are not limited to:
• Trimming hedges;
• Carving;
• Sectioning pallets, crates, and various packing materials;
• Sectioning furniture or other materials with nails, screws, or
other metal components;
• Butchering meat;
• Using the machine to lift, move, or split objects;
• Using the machine while fastened to xed supports.
Improper use of the machine will invalidate the warranty,
relieve the manufacturer from all liabilities. The user will
consequently be liable for all and any damage or injury to
himself/herself or others.
General Safety
mWARNING! When using electric/cordless yard tools,
basic safety precautions should always be followed to reduce
the risk of re, electric shock, and personal injury, including the
following:
1. Keep guards in place – Protective guards should be
checked periodically to ensure they are properly tted and
in correct working order.
2. Remove adjusting keys and wrenches – Check that
adjusting wrenches are removed from the saw before
turning it on.
3. Keep work area clean and well-lit – Clear work area of
branches and limbs after each cutting session. Cluttered
areas invite accidents.
4. Do not use in dangerous environments – Do not use
power tools in damp or wet locations.
5. Do not use the chain saw in the rain.
6. Keep bystanders and children away – All bystanders,
including children and pets, should be kept a safe
distance away from the work area.
7. Do not force the tool – It will do the job eectively and
safely if it is used at the rate for which it was designed.
8. Use the right tool – Do not force the tool or any
attachment on the tool to do a job for which they were
not designed.
9. Wear proper apparel – Do not wear loose articles of
clothing or jewelry since such items may get caught
in moving parts. Use of heavy-duty rubber gloves,
substantial non-skid footwear, and close-tting clothing is
recommended when working outdoors with power tools.
10. Wear protective hair coverings to contain long hair.
11. Always wear safety glasses and ear defenders to
provide eye and ear protection – Everyday eyeglasses
only have impact resistant lenses and do not provide the
same protection as safety glasses.
12. Wear face or dust masks – If the cutting operation is
dusty, the use of a face or dust mask specially designed
to lter out microscopic particles is recommended.
13. Do not overreach – Keep proper footing and balance
at all times.
14. Maintain tools with care – Keep tools sharp and clean
for best and safest performance. Follow instructions for
lubricating and changing accessories.
3
15. Reduce the risk of unintentional starting – Make sure
not press the trigger switch before inserting the battery.
16. Use recommended accessories – Consult the owner’s
manual for recommended accessories. The use of
improper accessories may cause risk of injury.
17. Check for damaged parts – Before each use, repair, or
replace any guard or part that is damaged. In addition,
check for alignment of moving parts, binding of moving
parts, breakage of parts, and any other conditions that
may aect the tool's operation.
18. Never leave tool unattended while it is running – Turn
the power OFF by removing the power cord directly from
its socket. Do not leave the saw until the cutting bar
comes to a complete stop.
19. Avoid unintentional starting – Do not carry the cordless
chain saw with your nger on the switch.
20. Do not grasp the exposed cutting blade or cutting
edges when picking up or holding the saw – Be sure to
encase the cutting bar in its protective sheath when not
in use.
21. Stay alert – Watch what you are doing. Use common
sense. Do not operate the chain saw when you are tired.
22. Store idle tool indoors – When not in use, appliances
should be stored indoors in a dry and high or locked-up
place out of the reach of children.
mWARNING! Some dust and debris created by the
use of the tool could contain chemicals known to the State
of California to cause cancer and birth defects or other
reproductive harm. Some examples of these chemicals are:
• Chemicals in fertilizers
• Compounds in insecticides, herbicides, and pesticides
• Arsenic and chromium from chemically treated lumber
Your risk from exposure to these chemicals varies, and
depends on how often you do this type of work. To reduce
your exposure, work in a well-ventilated area and with
approved safety equipment, such as dust masks that are
specially designed to lter out microscopic particles.
Chain Saw Safety Warnings
• Keep all parts of the body away from the saw chain when
the chain saw is operating. Before you start the chain saw,
make sure the saw chain is not contacting anything. A
moment of inattention while operating the chain saw may
cause entanglement of your clothing or body with the saw
chain.
• Always hold the chain saw with your right hand on the rear
handle and your left hand on the front handle. Holding the
chain saw with a reversed hand conguration increases
the risk of personal injury and should never be done.
• Wear safety glasses and hearing protection. If you are
using the chain saw every day under normal conditions,
you can be exposed to a noise level of 85 dB (A) or higher.
Further protective equipment for head, hands, legs and
feet is recommended. Adequate protective clothing will
reduce personal injury by ying debris or accidental
contact with the saw chain.
• Do not operate the chain saw in a tree. Operation of a
chain saw while up in a tree may result in personal injury.
• Always keep proper footing and operate the chain saw
only when standing on a xed, secure and level surface.
Slippery or unstable surfaces such as ladders may cause
a loss of balance or control of the chain saw.
• When cutting a limb that is under tension, be cautious
of spring back. When the tension in the wood bers is
released, the spring-loaded limb may strike the operator
and/or throw the chain saw out of control.
• Use extreme caution when cutting brush and saplings.
The slender material may catch the saw chain and be
whipped toward you or pull you o balance.
• Carry the chain saw by the front handle with the chain saw
switched o and away from your body. When transporting
or storing the chain saw, always t the guide bar cover.
Proper handling of the chain saw will reduce the likelihood
of accidental contact with the moving saw chain.
• Follow instructions for lubricating, chain tensioning and
changing accessories. An improperly tensioned or poorly
lubricated chain may either break or increase the chance
for kickback.
• Keep handles dry, clean and free from oil and grease.
Greasy, oily handles are slippery and can cause loss of
control.
• Cut wood only. Do not use the chain saw for any other
purpose. For example, do not use the chain saw to cut
plastic, masonry or non-wood building materials. Using
the chain saw in these incorrect ways could result in
serious damage to you and your tool.
Battery & Charger
Safety Instructions
We pay a great deal of attention to the design of every battery
pack to ensure that we supply you with batteries that are safe,
durable and have a high energy density. The battery cells have
a wide range of safety devices. Each individual cell is initially
formatted and its electrical characteristic curves are recorded.
This data is then used exclusively to be able to assemble the
best possible battery packs.
Despite all the safety precautions, caution must always be
exercised when handling batteries. The following points must
be obeyed at all times to ensure safe use. Safe use can only
be guaranteed if undamaged cells are used. Incorrect handling
of the battery pack can cause cell damage.
Especificaciones del producto
| Marca: | Sun Joe |
| Categoría: | máquina de aserrar |
| Modelo: | 20VION-CS10-RM |
¿Necesitas ayuda?
Si necesitas ayuda con Sun Joe 20VION-CS10-RM haz una pregunta a continuación y otros usuarios te responderán
máquina de aserrar Sun Joe Manuales
27 Octubre 2024
14 Septiembre 2024
31 Agosto 2024
17 Agosto 2024
15 Agosto 2024
15 Agosto 2024
12 Agosto 2024
11 Agosto 2024
11 Agosto 2024
9 Agosto 2024
máquina de aserrar Manuales
- máquina de aserrar Bosch
- máquina de aserrar AEG
- máquina de aserrar DeWalt
- máquina de aserrar Ford
- máquina de aserrar Silverline
- máquina de aserrar Brennenstuhl
- máquina de aserrar Ferm
- máquina de aserrar Clarke
- máquina de aserrar Ozito
- máquina de aserrar Gude
- máquina de aserrar Makita
- máquina de aserrar Draper
- máquina de aserrar Hitachi
- máquina de aserrar Black And Decker
- máquina de aserrar Vonroc
- máquina de aserrar Remington
- máquina de aserrar ACG
- máquina de aserrar Stanley
- máquina de aserrar Skil
- máquina de aserrar Hyundai
- máquina de aserrar Hilti
- máquina de aserrar Ryobi
- máquina de aserrar Florabest
- máquina de aserrar Festool
- máquina de aserrar Metabo
- máquina de aserrar Parkside
- máquina de aserrar Worx
- máquina de aserrar Meec Tools
- máquina de aserrar Milwaukee
- máquina de aserrar Hikoki
- máquina de aserrar Dremel
- máquina de aserrar Sovereign
- máquina de aserrar Tacklife
- máquina de aserrar Hazet
- máquina de aserrar Einhell
- máquina de aserrar Baumr-AG
- máquina de aserrar Yard Force
- máquina de aserrar Ferrex
- máquina de aserrar Husqvarna
- máquina de aserrar Maktec
- máquina de aserrar Craftsman
- máquina de aserrar Power Craft
- máquina de aserrar Powerplus
- máquina de aserrar Stiga
- máquina de aserrar Porter-Cable
- máquina de aserrar Cotech
- máquina de aserrar Genesis
- máquina de aserrar Trotec
- máquina de aserrar Troy-Bilt
- máquina de aserrar Cobra
- máquina de aserrar Texas
- máquina de aserrar Spear & Jackson
- máquina de aserrar Scheppach
- máquina de aserrar Atika
- máquina de aserrar McCulloch
- máquina de aserrar Sterwins
- máquina de aserrar Matrix
- máquina de aserrar Stihl
- máquina de aserrar Bavaria
- máquina de aserrar Dolmar
- máquina de aserrar Shindaiwa
- máquina de aserrar Flex
- máquina de aserrar Prime3
- máquina de aserrar Zipper
- máquina de aserrar Mafell
- máquina de aserrar Greenworks
- máquina de aserrar Fieldmann
- máquina de aserrar Max
- máquina de aserrar IKRA
- máquina de aserrar Truper
- máquina de aserrar Masport
- máquina de aserrar Grizzly
- máquina de aserrar Solo
- máquina de aserrar Cocraft
- máquina de aserrar MTM
- máquina de aserrar Maruyama
- máquina de aserrar Herkules
- máquina de aserrar Meister Craft
- máquina de aserrar Toolcraft
- máquina de aserrar RIDGID
- máquina de aserrar Batavia
- máquina de aserrar Proxxon
- máquina de aserrar Gardenline
- máquina de aserrar Holzmann
- máquina de aserrar Fein
- máquina de aserrar Oregon Scientific
- máquina de aserrar Elu
- máquina de aserrar Max Bahr
- máquina de aserrar Plantiflor
- máquina de aserrar Goon
- máquina de aserrar Triton
- máquina de aserrar BGU
- máquina de aserrar Wolfcraft
- máquina de aserrar Dedra
- máquina de aserrar Verto
- máquina de aserrar Anova
- máquina de aserrar Challenge Xtreme
- máquina de aserrar Global
- máquina de aserrar Rikon
- máquina de aserrar Elektra Beckum
- máquina de aserrar Duro Pro
- máquina de aserrar Toolson
- máquina de aserrar Toledo
- máquina de aserrar Jonsered
- máquina de aserrar MSW
- máquina de aserrar Royal Catering
- máquina de aserrar Robust
- máquina de aserrar Ultranatura
- máquina de aserrar FIXIT
- máquina de aserrar Einhell Bavaria
- máquina de aserrar Ergotools Pattfield
- máquina de aserrar MyTool
- máquina de aserrar McKenzie
- máquina de aserrar Proviel
- máquina de aserrar Morrison
- máquina de aserrar Garland
- máquina de aserrar Bavaria By Einhell
- máquina de aserrar Donau Elektronik
- máquina de aserrar Chicago Pneumatic
- máquina de aserrar Rona
- máquina de aserrar Bestgreen
- máquina de aserrar CMI
- máquina de aserrar MacAllister
- máquina de aserrar TAURUS Titanium
- máquina de aserrar Maxbear
- máquina de aserrar Evolution
- máquina de aserrar Extralink
- máquina de aserrar Yellow Garden Line
- máquina de aserrar Stalco
Últimos máquina de aserrar Manuales
27 Octubre 2024
27 Octubre 2024
27 Octubre 2024
27 Octubre 2024
27 Octubre 2024
26 Octubre 2024
26 Octubre 2024
26 Octubre 2024
22 Octubre 2024
21 Octubre 2024