Sussex VEBM120 Manual de Usario

Sussex Grúa VEBM120

Lee a continuación 📖 el manual en español para Sussex VEBM120 (1 páginas) en la categoría Grúa. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/1
7.5
Licence No. 0124
In ac cord anc e with AS/NZS 6400
Sussex Taps Pty Ltd
WATER RATING
www.waterr ating.g ov.au
The mo re
stars the mo re
water efcient
Mounting
Surface
Fixing
Nut Flexible Hose
Clamp
Optional
Base Flange
Hose extension
(Do not remove)
32 - 35mm
Product code
Installation guidelines
Plumber note
Voda
- The Mixer is supplied assembled, only the Fixing nut and the Brass Clamp need to be removed.
- Decide if the Optional Base Flange is to be used.
- If using the Optional Base Flange discard the smaller Base O Ring.
- Add the base Flange to base of Mixer and attach the Flexible Hoses to the Mixer Hose extensions.
- In some cases the Flexible Hoses may need to be fed through from under the mounting surface and then attach.
- Once the Flexible Hoses have been secured, lower the Mixer onto the mounting surface.
- Working from underneath the mounting surface fit Clamp and Fixing Nut.
- Before fully securing the Mixer ensure that the Base O Ring is intact and the Mixer is centered over the
mounting surface hole.
- The Mixer mounting surface must be completely water-tight.
- Connect the Hot and Cold Flexible hoses to the corresponding 1/2”BSP water feed lines.
- The 1/2” connection of the Flexible hoses have a conical seal, ensure the mating threads are cut square and
burr free.
- Isolating stop valves are recommended with all installations (not supplied).
- Ensure all fittings and connections are water-tight.
Note: Optional Base Flange must be used when the clearance hole for mounting the Mixer exceeds 35mm.
If the mounting hole clearance exceeds 45 mm a custom made Base flange will be required.
- On-site testing using higher water pressures must be conducted with the Mixer in the closed position.
(STATIC TEST)
- Under no circumstances is the Mixer to be opened when exceeding the maximum stated water pressure.
- At the completion of testing, do not relieve any high water pressure by operating the Mixer.
- Exposing the internals of the Mixer Car tridge to higher than specified water pressures will void the
manufacturers warranty.
VBM Basin mixer
VEBM Extended basin mixer 90mm outlet
VEBM120 Extended basin mixer 120mm outlet
VMBM Medium basin mixer 90mm outlet
VMBM120 Medium basin mixer 120mm
VBMSS Basin mixer 316 S/S
Basin mixer
sussextaps.com.au
Tapware is to be installed by a Licensed Plumber in accordance with AS/NZS 3500:2003
Recommended working water pressure 300-500 kpa. Maximum water temperature is 65 deg.c
Copyright © Sussex Taps.

Especificaciones del producto

Marca: Sussex
Categoría: Grúa
Modelo: VEBM120
Color del producto: Groen
Peso.: 48 g
Ancho: 65 mm
Profundidad: 90 mm
Altura: 20 mm
Peso del embalaje: 100 g
Ancho del embalaje: 42 mm
Empaquetadura en profundidad: 213 mm
Altura del embalaje: 145 mm
Tipo de conexión en serie: RS-232
Certificados de sostenibilidad: RoHS
Temperatura de almacenamiento: -20 - 100 °C
Interno: Ja
Compatible con Linux: Ja
Interfaz de host: PCIe
Sistemas operativos de servidor compatibles: Windows 2000 Server, Windows Server 2003, Windows Server 2003 x64, Windows Server 2008 R2, Windows Server 2012
Puertos seriales): 1
Temperatura de funcionamiento (TT): -10 - 80 °C
Humedad relativa de funcionamiento (VV): 5 - 85 procent
FIFO (primero en entrar, primero en salir): 128 B
Conectores de alimentación de periféricos (Molex) (4 pines): 1
Interfaz de salida: Serie

¿Necesitas ayuda?

Si necesitas ayuda con Sussex VEBM120 haz una pregunta a continuación y otros usuarios te responderán




Grúa Sussex Manuales

Grúa Manuales

Últimos Grúa Manuales