Tecmate Optimate Pro 2 Manual de Usario

Tecmate cargador de bateria Optimate Pro 2

Lee a continuación 📖 el manual en español para Tecmate Optimate Pro 2 (48 páginas) en la categoría cargador de bateria. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/48

1 x 12V STD / AGM-MF / GEL

2 - 40Ah (12 hour charge)

NEW / 2A / 4A PROGRAMMES

2 x 12V STD / AGM-MF / GEL

2 - 100Ah (48 hour charge)

2 x 2A PROGRAMME

M-MF

0Ah (12 hour char

)

4A PR

RAMME

Automatic charger for 12V lead/acid batteries • Chargeur automatique pour

batteries 12V plomb-acide • Cargador automático para baterías 12V

plomo-ácido • Carregador automático para baterias de 12V chumbo/ácido •

Automatische Ladegerät für 12V Blei-Säure Batterien • Automatische lader

voor 12V loodzuur accu’s • Caricabatterie automatico per batterie 12V

piombo-acido • Automatisk diagnostisk laddare för 12V blybatterier

INSTRUCTIONS FOR USE

IMPORTANT: Read completely

before charging

MODE D’EMPLOI

IMPORTANT: à lire avant

d’utiliser l’appareil

ANWENDUNGSVORSCHRIFTEN

WICHTIG: Vollständig vor der

Benutzung lesen

GEBRUIKSAANWIJZING

BELANGRIJK: Lees volledig voor

gebruik

MODO DE EMPLEO

IMPORTANTE: a leer antes de

utilizar el aparato

INSTRUÇÕES DE UTILIZAÇÃO

IMPORTANTE: Ler antes de

utilizar.

ISTRUZIONI PER L’USO

IMPORTANTE: da leggere prima

di utilizzare l’apparecchio

INSTRUKTIONER

VIKTIGT: läs följande fullständiga

instruktioner för användningen

innan du använder laddaren

LED #2

LED #1

LED #3

LED #4

LED #8

LED #7

LED #9

LED #5

LED #6

LED #7

LED #8

LED #9

LED #6

LED #5

LED #1

LED #7

LED #8

LED #9

LED #6

LED #5

LED #1

115V / 230V

AC Class II

ON / OFF : 0 / 1

INPUT / SECTEUR / NETZ / ALIM. / RED / INMATING

AUTOMATIC CHARGER FOR 12V LEAD-ACID BATTERIES

DO NOT USE FOR NiCd, NiMH, Li-Ion OR NON-RECHARGEABLE BATTERIES.

Input supply: selectable on the charger: 115V 0.8 Amp, or 230V 0,4 Amp, 50/60 Hz.

Constant current output:

– OptiMate PRO-S: NEW (4A max.) / 2 / 4A selectable by switch, charges one battery at a time.

– OptiMate PRO2: independently charges two batteries at a time, maximum current per circuit is 2A.

The actual charge current in all output selections is automatically adjusted according to the dynamic characteristics

of the connected battery by the ampmatic™ automatic output control circuit,

see § 6.1 below.

IMPORTANT: READ THE FOLLOWING INSTRUCTIONS BEFORE USING THE CHARGER

This appliance is not intended for use by persons (including children) with reduced physical, sensory

or mental capabilities, or lack of experience and knowledge, unless they have been given supervision

or instruction concerning use of the appliance by a person responsible for their safety. Children

should be supervised to ensure that they do not play with the appliance.

SAFETY WARNING AND NOTES: Batteries emit EXPLOSIVE GASES - prevent ﬂ ame or sparks near batteries.

Disconnect AC power supply before making or breaking DC/battery connections. Battery acid is highly corrosive. Wear

protective clothing and eyewear and avoid contact. In case of accidental contact, wash immediately with soap and water.

Check that the battery posts are not loose; if so, have the battery professionally assessed. If the battery posts are corroded,

clean with a copper wire brush; if greasy or dirty clean with a rag damped in detergent. Use the charger only if the input and

output leads and connectors are in good, undamaged condition. If the input cable is damaged, it is essential to have it replaced

without delay by the manufacturer, his authorised service agent or a qualiﬁ ed workshop, to avoid danger. Protect your charger

from acid and acid fumes and from damp and humid conditions both during use and in storage. Damage resulting from

corrosion, oxidation or internal electrical short-circuiting is not covered by warranty. Distance the charger from the battery

during charging to avoid contamination by or exposure to acid or acidic vapours. If using it in the horizontal orientation, place

the charger on a hard, ﬂ at surface, but NOT on plastic, textile or leather. Use the ﬁ xing holes provided in the enclosure base to

attach the charger to any convenient, sound vertical surface.

BATTERY CONNECTIONS: For charging the battery off-vehicle, one set of battery clips is supplied for each charger output.

The OptiMate PRO2 (only) is delivered with 2 additional connection sets with metal eyelet lugs for permanent connection to the

posts of 2 batteries. The connectors that connect these sets to the charger output cables are protected by resealable

weatherproof caps designed to protect the connectors from dirt and damp whenever the charger is not attached. These

connection sets allow easy and sure connection of the charger to maintain batteries on-vehicle. Consult a professional service

agent for assistance in attaching the metal eyelets to the battery posts. Ensure that the connectors with weatherproof cap as

well as the cables are positioned and secured so as to avoid any risk of fouling any moving part of the vehicle and any risk of

the cable being pinched or damaged by sharp edges. The in-line fuses in these connection sets protect batteries against

potential shorting across positive and negative conductors in the case of accidental damage. Replace any burnt fuse only with

a similar new fuse of 15A rating.

CONNECTING THE CHARGER TO THE BATTERY

1. Disconnect AC power supply before making or breaking DC / battery connections.

2. If charging a battery in the vehicle with the battery clips, before making connections, ﬁ rst check that the battery clips can

be safely and securely positioned clear from surrounding wiring, metal tubing or the chassis. Make connections in the

following order: First connect to the battery terminal not connected to the chassis (normally positive), then connect the

other battery clip (normally negative) to the chassis well away from the battery and fuel line. Always disconnect in reverse

sequence.

3. When charging a battery out of the vehicle with the battery clips, place it in a well ventilated area. Connect the charger to

the battery: RED clamp to POSITIVE (POS, P or +) terminal and BLACK clamp to NEGATIVE (NEG, N or –) terminal. Make

sure the connections are ﬁ rm and secure. Good contact is important.

4. Charging of 2 similar 12V batteries connected in series to form a 24V battery: The OptiMate PRO 2 model (only) can

be used to charge a 24V battery comprising two 12V batteries connected in series, without delinking the positive pole of

the one battery from the negative pole of the other. Connect the negative (black) clamp and positive (red) clamp of one of

the two outputs to the negative (– /black) and positive (+/red) poles respectively of one of the two batteries, and likewise

the clamps of the second output to the respective poles of the second battery.

5. If the battery is deeply discharged (and possibly sulphated), remove from the vehicle and inspect the battery

before connecting the charger for a recovery attempt. Visually check the battery for mechanical defects such as a

bulging or cracked casing, or signs of electrolyte leakage. If the battery has ﬁ ller caps and the plates within the cells can

be seen from the outside, examine the battery carefully to try to determine if any cells seem different to the others (for

Especificaciones del producto

Marca:	Tecmate
Categoría:	cargador de bateria
Modelo:	Optimate Pro 2

¿Necesitas ayuda?

Si necesitas ayuda con Tecmate Optimate Pro 2 haz una pregunta a continuación y otros usuarios te responderán

Tu nombre*

Tu correo electrónico*

Escribe tu pregunta aquí

cargador de bateria Tecmate Manuales

Tecmate OPTIMATE 5 TM 221 Manual de Usario

8 Septiembre 2024

Tecmate Optimate 5 Voltmatic - TM222 Manual de Usario

8 Septiembre 2024

Tecmate OPTIMATE 5 TM 220 Manual de Usario

8 Septiembre 2024

Tecmate Optimate Lithium - TM290 Manual de Usario

8 Septiembre 2024

Tecmate Optimate 3+ Manual de Usario

8 Septiembre 2024

Tecmate Optimate Lithium - TM291 Manual de Usario

8 Septiembre 2024

Tecmate ACCUMATE PRO Manual de Usario

8 Septiembre 2024

Tecmate ACCUMATE Manual de Usario

8 Septiembre 2024

Tecmate Optimate Pro 2 Manual de Usario

8 Septiembre 2024

Tecmate ACCUMATE PRO 5 Manual de Usario

8 Septiembre 2024

cargador de bateria Manuales

Últimos cargador de bateria Manuales

Nitecore UHX1 PRO Manual de Usario

27 Octubre 2024

Nitecore EMR05 TAC Manual de Usario

26 Octubre 2024

Bosch GAA12V-21N Manual de Usario

24 Octubre 2024

Panasonic CF-VCB331 Manual de Usario

24 Octubre 2024

Ryobi One+ RC18627 Manual de Usario

21 Octubre 2024

Alecto BL-179 Manual de Usario

19 Octubre 2024

Graupner Ultramat 12 Manual de Usario

16 Octubre 2024

Graupner ULTRA DUO PLUS 30 Manual de Usario

16 Octubre 2024

MSW S-CHARGER-20A.2 Manual de Usario

15 Octubre 2024

MSW S-CHARGER-10A.2 Manual de Usario

15 Octubre 2024