Tripp Lite UPB-10K4-S2U Manual de Usario

Lee a continuación 📖 el manual en español para Tripp Lite UPB-10K4-S2U (16 páginas) en la categoría banco de energía. Esta guía fue útil para 12 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/16
Owner’s Manual
10,400mAh Dual Port
Mobile Power Bank
Model: UPB-10K4-S2U
Español 5 • Français 9 • Русский 13
PROTECT YOUR INVESTMENT!
Register your product for quicker service
and ultimate peace of mind.
You could also win an
ISOBAR6ULTRA surge protector—
a $100 value!
www.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2017 Tripp Lite. All rights reserved.
17-05-362-9336ED.indb 1 6/7/2017 1:34:16 PM
2
General Safety Instructions
Package Contents
Product Features
Make sure the power bank is fully charged prior to use.
Please use a cable suitable for your device when charging it with the power bank.
When charging the power bank, it is recommended you use the included USB Micro-B cable.
Under a low-battery condition, the LEDs will turn off while charging a device. Recharge
the power bank as soon as possible to avoid shortening the battery life.
The battery should be charged at least every three months to avoid shortening the battery life.
It is recommended to disconnect the charging device upon being fully charged to avoid
further use of battery.
When the power bank enters protection mode (LEDs turn off and power bank will not
charge) caused by issues such as a short circuit, use an external charger to charge it and
bring it back to normal operation.
Keep the power bank away from fire, and avoid temperatures above 113°F (45°C).
Do not get the power bank wet or immerse it in water.
Do not wash the power bank with corrosive cleaner.
Do not squeeze or puncture the power bank so as to avoid electrolyte leakage of lithium-
ion battery.
Do not attempt to disassemble, modify or fix this device on your own.
Do not use a damaged cable or power charger to charge the power bank.
Please recycle this device at an appointed disposal location for lithium-ion batteries.
UPB-10K4-S2U
3 ft. USB Micro-B Cable
Owner’s Manual
Charge multiple phones, tablets or other mobile devices on the go, without the need for a
power outlet
Dual USB ports provide up to 5V 1A and 5V 2.4A of power respectively, for the
simultaneous charging of mobile devices
USB 5V 2.4A port features built-in auto-sensing functionality for optimal compatibility
with connected devices
Sleek, portable design is perfect for on-the-go use
10,400mAh capacity lets you charge at maximum power draw for hours
4 battery power LEDs show remaining battery capacity
Automatic power-off turns off the LEDs when not in use
Short circuit, overvoltage, overcurrent, overcharge and overdischarge protection for safe,
reliable charging
17-05-362-9336ED.indb 2 6/7/2017 1:34:17 PM
3
System Requirements
Optional Accessories
USB Device Charging Instructions
Power Bank Charging Instructions
Smartphone, tablet or other mobile USB device
M100-Series USB to Lightning® Cables
U030-Series USB 2.0 A to 5-Pin Mini-B Cables
U038-Series USB 2.0 A to USB Type-C Cables
UR05C-Series Micro-B Charge-Only Cables
U326-Series USB 3.0 A to Micro-B Cables
U420-003 USB 3.1 Gen 1 (5 Gbps) Type-C M/M Cable
Notes:
• Before charging your devices for the first time, you should first fully charge the power bank
• There is a power button located on top of the power bank. When pressed once, the LEDs will
illuminate to indicate how much battery capacity is left. When held down, this button turns off the
LEDs and stops any device charging.
• When charging a USB device, the LEDs illuminate to indicate the battery capacity level
LED Status Battery Capacity
100-75%
50-75%
25-50%
1-25%
0%
1. Connect your mobile devices to the USB-A ports on the power bank using the included
USB Micro-B cable or a USB cable suitable for your device.
2. The devices will begin charging, with the LEDs operating per the above notes.
Notes:
• There is a power button located on top of the power bank. When pressed once, the LEDs will
illuminate to indicate how much battery capacity is left. When held down, this button turns off the
LEDs and stops any device charging.
• When charging the power bank, the LED indicator lights will illuminate to indicate the level of battery
capacity
LED Status Battery Capacity
100%
75-99%
50-75%
25-50%
1-25%
1. Using the included USB Micro-B cable, connect the Micro-B port on the power bank to
the USB-A port on a computer or USB charger.
2. The device will begin charging, with the LEDs operating per the above notes.
= lit; = unlit
= lit; = unlit; = flashing
17-05-362-9336ED.indb 3 6/7/2017 1:34:17 PM

Especificaciones del producto

Marca: Tripp Lite
Categoría: banco de energía
Modelo: UPB-10K4-S2U

¿Necesitas ayuda?

Si necesitas ayuda con Tripp Lite UPB-10K4-S2U haz una pregunta a continuación y otros usuarios te responderán




banco de energía Tripp Lite Manuales

banco de energía Manuales

Últimos banco de energía Manuales