Chicago Pneumatic CP7737 Manual de Usario
Lee a continuación 📖 el manual en español para Chicago Pneumatic CP7737 (36 páginas) en la categoría maquina de atornillar. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/36
Operator’s Manual
CP7727 / CP7737
Impact Wrench
WARNING
8940173585 Rev 01 08/2015
To reduce risk of injury, everyone using, installing, repairing, maintaining,
changing accessories on, or working near this tool must read and
understand these instructions, as well as separately provided safety
instructions part number 6159948710, before performing any such task.
Air Diagram
Model
Drive
Torque
Free speed Dimension
LxWxH
Air Consumption
Average Weight Inner Hose Dia. Air Inlet
Sound pressure
LpA
Sound power
LwA
Vibrations
Working Max ahd K
L
W
H
1 2 3 4 5 6 7 8 9 10
[inch] [ft.lbs]
[Nm] [min-1] [inch]
[mm]
[SCFM]
[Nl/s]
[lb]
[kg]
[inch]
[mm] [inch] [dB(A)] [dB(A)] [m/s²] [m/s²]
CP7737 1/2“ 25-165
34-224
220
300 9000 9.4x2.4x3.5
240x60x88
4
1.9
2.5
1.13
3/8“
10 1/4“ NPT 93 104 10.3 1.3
CP7727 3/8“ 20-142
26-192
185
250 9000 9.4x2.4x3.4
240x60x86
4
1.9
2.5
1.12
3/8“
10 1/4“ NPT 93 104 10.3 1.3
H
A
B
ON/OFF
L
W
FIG. 02 FIG. 03
FIG. 01
1.Technical Data
Model
Drive
Torque
Free speed Dimension
L x W x H
Air Consumption
Average Weight Inner Hose Dia. Air Inlet
Sound pressure
LpA
Sound power
LwA
Vibrations
Working Max ahd K
L
W
H
1 2 3 4 5 6 7 8 9 10
[inch] [ft.lbs]
[Nm]
[ft.lbs]
[Nm] [min-1] [inch]
[mm]
[SCFM]
[Nl/s]
[lb]
[kg]
[inch]
[mm] [inch] [dB(A)] [dB(A)] [m/s²] [m/s²]
max. pressure 6.3bar(90psi)
ah : Blows per minute, Uncertainty ; k L
pA Sound pressure dB(A), KpA
K= WA = 3 dB Uncertainty.
Declaration of noise and vibration statement (ISO 15744 and ISO 28927-2)
All values are current as of the date of this publication. For the latest information please visit www.cp.com.
These declared values were obtained by laboratory type testing in accordance with the stated standards and are suitable for comparison with the declared
values of other tools tested in accordance with the same standards. These declared values are not adequate for use in risk assessments and values measured
in individual work places may be higher. The actual exposure values and risk of harm experienced by an individual user are unique and depend upon the way
the user works, the workpiece and the workstation design, as well upon the exposure time and the physical condition of the user. We, CHICAGO PNEUMATIC
TOOLS , cannot be held liable for the consequences of using the declared values, instead of values reecting the actual exposure, in an individual risk
assessment in a work place situation over which we have no control. This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
An EU guide to managing hand-arm vibration can be found at www. pneurop.eu/uploads/documents/pdf/PN3-02-NV_Declaration_info_sheet_0111.pdf. We
recommend a programme of health surveillance to detect early symptoms which may relate to noise or vibration exposure, so that management procedures can
be modied to help prevent future impairment.
2. Machine type(s)
• This product is designed for installing and removing threaded fasteners in wood, metal and plastic. No other use permitted. For professional use only.
• Please read the instructions carefully before starting the machine.
3. Operation
• Fix the accessories properly to the tool.
• Connect device as shown in Fig. 01 to a clean and dry air supply.
• To start the machine, pull the trigger (A). Machine speed is increase by increasing pressure on the trigger. Release the trigger to stop.
• To switch rotation, turn the switch (B) as shown in Fig. 03.
• Use the reverse switch (B) only when the drive spindle comes to a complete stop. Changing the speed before the drive spindle stops may damage the
machine.
• To adjust output power, turn the regulator (B).
4. Lubrication
Motor Clutch
• Use an air line lubricator with SAE #10 oil, adjusted to two drops per minute. If an air
line lubricator cannot be used, add air motor oil to the inlet once a day.
Recommended lubricant : CP Oil PROTECTO-LUBE
- 4 oz (0.12l) P/N: CA149661
- 20.8 oz (0.591l) P/N: CA000046
- 1gal (3.8l) P/N: P089507
• Use CP Pneu-Lube synthetic clutch Grease 8940158455 :
0,3 oz. (8,4g).
5. Maintenance instruction
• Follow local country environmental regulations for safe handling and disposal of all components.
• Maintenance and repair work must be carried out by qualified personnel using only original spare parts. Contact the manufacturer or your nearest authorised
dealer for advice on technical service or if you require spare parts.
• Always ensure that the machine is disconnected from energy source to avoid accidental operation.
• Disassemble and inspect the tool every 3 months if the tool is used every day. Replace damaged or worn parts.
• High wear parts are underlined in the parts list.
6. Disposal
• The disposal of this equipment must follow the legislation of the respective country.
• All damaged, badly worn or improperly functioning devices MUST BE TAKEN OUT OF OPERATION.
• Repair only by technical maintenance staff.
7. EC Declaration of conformity
We : CHICAGO PNEUMATIC Tool Co. LLC 1800 Overview Drive Rock Hill, SC 29730 - USA
Machine type(s): impact wrench
Declare that the product(s): CP7727, CP7737 Serial Number : 00001-99999
Origin of the product : Taïwan
is in conformity with the requirements of the council Directives on the approximation of the laws of the Member States relating : to “Machinery“ 2006/42/EC (17/05/2006)
applicable harmonised standard(s) : EN ISO 11148-6:2012
Name and position of issuer : Pascal Roussy (R&D Manager)
Place & Date : Saint-Herblain, 05/08/2015
Technical le available from EU headquarter. Pascal Roussy R&D manager CP Technocenter 38, rue Bobby Sands - BP10273 44800 Saint Herblain - France
Copyright 2015, Chicago Pneumatic Tool Co. LLC
All rights reserved. Any unauthorized use or copying of the contents or part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers and drawings.
Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not covered by Warranty or Product Liability.
Original Instructions
EN English (English) CP7737 / CP7727
impact wrench
Especificaciones del producto
Marca: | Chicago Pneumatic |
Categoría: | maquina de atornillar |
Modelo: | CP7737 |
Color del producto: | Transparant |
Ancho: | 166.5 mm |
Profundidad: | 0.35 mm |
Altura: | 236.5 mm |
Amable: | Randloze privacyfilter voor schermen |
Fácil de limpiar: | Ja |
País de origen: | Verenigd Koninkrijk |
Resistente a huellas dactilares: | Ja |
Adecuado para: | Tablet |
Material: | Kunststof |
relación de aspecto: | 4:3 |
Diámetro de la pantalla en centímetros.: | 24.638 cm |
Funciones de seguridad: | Krasbestendig |
Compatibilidad: | iPad Air, iPad Air 2 |
Paño de limpieza: | Ja |
Tipos de pantalla admitidos: | LCD |
Tamaño máximo de pantalla: | 9.7 " |
Código del Sistema Armonizado (SA): | 85299097 |
Acabado de la superficie: | Glanzend/mat |
Fácilmente extraíble: | Nee |
Fácil de aplicar: | Ja |
Visualización de funciones de filtro: | Anti-glare, Privacy |
Tipo-de-instalación: | Volledige zelfklevend |
Protector de pantalla duradero: | Ja |
Compatible con pantalla táctil: | Ja |
Tamaño-de-la-imagen: | Standaard |
Color del filtro: | Transparant |
Transmision de luz: | 75 procent |
Orientación del filtro de privacidad: | Liggend & staand |
Reversibilidad: | Mat-naar-glanzend |
Aplicación sin inclusiones de aire.: | Ja |
¿Necesitas ayuda?
Si necesitas ayuda con Chicago Pneumatic CP7737 haz una pregunta a continuación y otros usuarios te responderán
maquina de atornillar Chicago Pneumatic Manuales
14 Septiembre 2024
14 Septiembre 2024
14 Septiembre 2024
14 Septiembre 2024
14 Septiembre 2024
14 Septiembre 2024
14 Septiembre 2024
14 Septiembre 2024
14 Septiembre 2024
maquina de atornillar Manuales
- maquina de atornillar Bosch
- maquina de atornillar AEG
- maquina de atornillar DeWalt
- maquina de atornillar Silverline
- maquina de atornillar Ferm
- maquina de atornillar Gude
- maquina de atornillar Omega
- maquina de atornillar Makita
- maquina de atornillar Hitachi
- maquina de atornillar Black And Decker
- maquina de atornillar Vonroc
- maquina de atornillar Stanley
- maquina de atornillar Skil
- maquina de atornillar Yato
- maquina de atornillar Hilti
- maquina de atornillar Ryobi
- maquina de atornillar Festool
- maquina de atornillar Metabo
- maquina de atornillar Parkside
- maquina de atornillar Worx
- maquina de atornillar Meec Tools
- maquina de atornillar Milwaukee
- maquina de atornillar Hikoki
- maquina de atornillar Dremel
- maquina de atornillar Tacklife
- maquina de atornillar Hazet
- maquina de atornillar Einhell
- maquina de atornillar Craftsman
- maquina de atornillar Powerplus
- maquina de atornillar Cotech
- maquina de atornillar Genesis
- maquina de atornillar Beta
- maquina de atornillar Kraftwerk
- maquina de atornillar Kress
- maquina de atornillar Fieldmann
- maquina de atornillar Cocraft
- maquina de atornillar Meister Craft
- maquina de atornillar Toolcraft
- maquina de atornillar Fein
- maquina de atornillar Park Tool
- maquina de atornillar Elu
- maquina de atornillar Goon
- maquina de atornillar Sthor
- maquina de atornillar Wiha
- maquina de atornillar SW-Stahl
- maquina de atornillar Cleco
- maquina de atornillar MSW
- maquina de atornillar Einhell Bavaria
- maquina de atornillar Wera
- maquina de atornillar Rodcraft
- maquina de atornillar Bavaria By Einhell
- maquina de atornillar Facom
- maquina de atornillar TAURUS Titanium
Últimos maquina de atornillar Manuales
24 Octubre 2024
20 Octubre 2024
17 Octubre 2024
17 Octubre 2024
15 Octubre 2024
12 Octubre 2024
10 Octubre 2024
7 Octubre 2024
5 Octubre 2024
5 Octubre 2024