Chicago Pneumatic CP7762 Manual de Usario

Lee a continuación 📖 el manual en español para Chicago Pneumatic CP7762 (36 páginas) en la categoría maquina de atornillar. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/36
Operators Manual
CP7762
Impact Wrench
WARNING
To reduce risk of injury, everyone using, installing, repairing, maintaining,
changing accessories on, or working near this tool must read and
understand these instructions, as well as separately provided safety
instructions part number 6159948710, before performing any such task.
8940174867 REV. 02
04/2017
Fig. 02
Air Diagram:
Model
Drive
Torque
Speed Dimension
L*W*H
Air consumption
Weight
Inner
hose di-
ameter
Air inlet
Sound
pres-
sure
LpA
Sound
power
LwA
Vibrations
Working Max @ load a k
W
L
1 2 3 4 5 6 7 8 9 10 11
in. ft.lbs
N.m
ft.lbs
N.m rpm in.
mm
SCFM
Nl/s
lbs
kg
in.
mm in. dB(A) dB(A) m/s² m/s²
CP7762 3/4" 150 - 670
200 – 900
1050
1420 4850 6,24*3,3*7,87
159*84*200
34,75
16,4
6,6 3/4"
3/8" NPT 95 106 10,7 2,8
3 10
Fig. 01
AC
B
3/8’
Technical Data
Model
Drive
Torque
Free speed Dimension
L x W x H
Air Consumption
Weight Inner Hose Dia. Air Inlet
Sound pressure
LpA
Sound power
LwA
Vibrations
Working Max Average at load ahd K
W
L
1 2 3 4 5 6 7 8 9 10
[inch] [ft.lbs]
[Nm]
[ft.lbs]
[Nm] [min-1] [inch]
[mm]
[Nl/s]
[SCFM]
[kg]
[lb]
[inch]
[mm] [inch] [dB(A)] [dB(A)] [m/s²] [m/s²]
max. pressure 6.3bar(90psi)
ah : Vibration level, Uncertainty ; k L
pA Sound pressure dB(A), K
pA K= WA = 3 dB Uncertainty.
Declaration of noise and vibration statement (ISO 15744 and ISO 28927-2)
All values are current as of the date of this publication. For the latest information please visit www.cp.com.
These declared values were obtained by laboratory type testing in accordance with the stated standards and are suitable for comparison with the declared
values of other tools tested in accordance with the same standards. These declared values are not adequate for use in risk assessments and values measured
in individual work places may be higher. The actual exposure values and risk of harm experienced by an individual user are unique and depend upon the way
the user works, the workpiece and the workstation design, as well upon the exposure time and the physical condition of the user. We, CHICAGO PNEUMATIC
TOOLS , cannot be held liable for the consequences of using the declared values, instead of values reecting the actual exposure, in an individual risk
assessment in a work place situation over which we have no control. This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
An EU guide to managing hand-arm vibration can be found at www. pneurop.eu/uploads/documents/pdf/PN3-02-NV_Declaration_info_sheet_0111.pdf. We
recommend a programme of health surveillance to detect early symptoms which may relate to noise or vibration exposure, so that management procedures can
be modied to help prevent future impairment.
Machine type(s)
This product is designed for installing and removing threaded fasteners in wood, metal and plastic. No other use permitted. For professional use only.
Operation
Fix the accessories properly to the tool.
Connect device as shown in Fig. 01 to a clean and dry air supply.
To start the machine, pull the trigger (A). Machine speed is increase by increasing pressure on the trigger. Release the trigger to stop.
To switch rotation, turn the switch (B) as shown in Fig. 02.
Use the reverse switch (B) only when the drive spindle comes to a complete stop. Changing the speed before the drive spindle stops may damage the
machine.
To adjust output power, turn the regulator (C) as shown in Fig. 02.
Lubrication
Motor Clutch
Use an air line lubricator with SAE #10 oil, adjusted to two drops per minute. If an air line
lubricator cannot be used, add air motor oil to the inlet once a day.
Recommended lubricant : CP Oil PROTECTO-LUBE
- 4 oz (0.12l) P/N: CA149661
- 20.8 oz (0.591l) P/N: CA000046
- 1gal (3.8l) P/N: P089507
Use CP Pneu-Lube synthetic clutch Grease 8940158455 :
9 g (0.31 oz.)
Maintenance instruction
Follow local country environmental regulations for safe handling and disposal of all components.
Maintenance and repair work must be carried out by qualified personnel using only original spare parts. Contact the manufacturer or your nearest authorised
dealer for advice on technical service or if you require spare parts.
Always ensure that the machine is disconnected from energy source to avoid accidental operation.
Disassemble and inspect the tool every three 3 months if the tool is used every day. Replace damaged or worn parts.
High wear parts are underlined in the parts list.
To keep downtime to a minimum, the following service kits are recommended :
Tune-Up Kit : see part list
Disposal
The disposal of this equipment must follow the legislation of the respective country.
All damaged, badly worn or improperly functioning devices MUST BE TAKEN OUT OF OPERATION.
Repair only by technical maintenance staff.
EU Declaration of Conformity
We : CHICAGO PNEUMATIC Tool Co. LLC, 1815 Clubhouse Drive, Rock Hill, SC 29730 - USA
Machine type(s) : impact wrench
Declare under our sole responsibility that the product(s) : CP7762 Serial Number : 00001-99999
Origin of the product : Taiwan
is in conformity with the requirements of the council Directives on the approximation of the laws of the Member States relating : to “Machinery 2006/42/EC
(17/05/2006)
applicable harmonised standard(s) : EN ISO 11148-6:2012
Name and position of issuer : Pascal Roussy (R&D Manager)
Place & Date : Saint-Herblain, 16/03/2017
Technical le available from EU headquarter. Pascal Roussy R&D manager, CP Technocenter 38, rue Bobby Sands - BP10273 44800 Saint Herblain - France
Copyright 2017, Chicago Pneumatic Tool Co. LLC
All rights reserved. Any unauthorized use or copying of the contents or part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers and drawings.
Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not covered by Warranty or Product Liability.
Original Instructions
EN English (English) CP7762
impact wrench

Especificaciones del producto

Marca: Chicago Pneumatic
Categoría: maquina de atornillar
Modelo: CP7762
Colocación del dispositivo: Vrijstaand
Tipo de operación: Draaiknop
Color del producto: Wit
Bisagras de puerta: Rechts
Pantalla incorporada: Nee
Peso.: 59000 g
Ancho: 540 mm
Profundidad: 610 mm
Altura: 1830 mm
Impuesto neto: 156 W
Tipo de enchufe: Type G
Número de cajones del congelador: 4
Bloqueo infantil: Nee
Nivel de ruido: 40 dB
Clase-de-eficiencia-energética: E
Consumo-anual-de-energía: 230 kWu
Peso del embalaje: 64000 g
Ancho del embalaje: 578 mm
Empaquetadura en profundidad: 632 mm
Altura del embalaje: 1882 mm
Capacidad neta del congelador: 96 l
Capacidad de congelación: 5 kg/24u
Función de descongelación: Ja
Dirección de apertura de puerta intercambiable.: Ja
Capacidad neta del frigorífico: 248 l
Sin escarcha (nevera): Ja
Iluminación interior del frigorífico: Ja
tipo-de-lámpara: LED
Sistema multivía aérea (refrigerador): Nee
Número de estantes en el refrigerador.: 4
Número-de-cajones-para-verduras: 1
Posición del congelador: Onder
Sin escarcha (congelador): Ja
Tiempo de retención en caso de corte de energía: 8 uur
Función de congelación rápida: Nee
Número de estantes del congelador: 4
numero de estrellas: 4*
Capacidad neta total: 248 l
Alarma de temperatura: Nee
rejilla para huevos: Ja
Botellero: Nee
Sin sistema Frost: Ja
Descongelación automática (frigorífico): Ja
Material del estante: Glas
Bolsillos en las puertas del refrigerador: 3
Al área del compartimento: Ja
Alarma de puerta abierta: Nee
Actual: 0.75 A
Función incorporada: Nee
Temperatura mínima de funcionamiento: 16 °C
Temperatura máxima (en funcionamiento): 32 °C
Clase-climática: N
Descongelación automática (congelador): Ja
Clase de emisión de ruido: C
Pies ajustables: Ja
Ubicación de la exhibición: Binnenin
País de origen: Turkije
Peso del paquete: 64 kg
Código aduanero de producto (TARIC): 84181080
Estantes ajustables: Ja
Dispensador de agua: Nee
Número de clasificación de control de exportaciones (ECCN): 84181080
voltaje-de-entrada-de-CA: 220 V
Frecuencia-de-entrada-de-CA: 50 Hz
Dividido: 50/50
Peso del embalaje de poliestireno expandido (EPS): 556 g
Porta cubitos de hielo: Ja
Peso del embalaje de papel: 3059 g
Peso de los envases de plástico.: 197 g
Hotpoint Technologies (almacenamiento de alimentos): Fresh Zone, Frost Free, Power safe

¿Necesitas ayuda?

Si necesitas ayuda con Chicago Pneumatic CP7762 haz una pregunta a continuación y otros usuarios te responderán




maquina de atornillar Chicago Pneumatic Manuales

maquina de atornillar Manuales

Últimos maquina de atornillar Manuales