Draper FocalPoint Manual de Usario
Draper
pantalla de proyección
FocalPoint
Lee a continuación 📖 el manual en español para Draper FocalPoint (29 páginas) en la categoría pantalla de proyección. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/29
FocalPoint™ Instructions and Assembly Guides
Clicking on size or page number below will take you to that particular assembly guide.
Page
FocalPoint Assembly Instructions ............................................................................................................................... 2
FocalPoint Assembly Guides ..................................................................................................................................3- 26
4:3 NTSC Format
Image Area Image Area Overall Size Overall Size
(Inches) (cm) (Inches) (cm) Diagonal
60" X 80" 152 X 203 68" X 92" 173 x 234 100" 3
72" x 96" 183 x 244 80" x 104" 203 x 264 150" 4
90" x 120" 229 x 305 98" x 128" 249 x 325 150" 5
108" x 144" 274 x 366 116" x 152" 295 x 386 180" 6
126" x 168" 320 x 427 134" x 176" 340 x 447 210" 7
144" x 192" 366 x 488 152" x 200" 386 x 508 240" 8
162" x 216" 411 x 549 170" x 224" 432 x 569 270" 9
180" x 240" 457 x 610 188" x 248" 478 x 630 300" 10
16:9 HDTV Format
45" x 80" 114 x 203 56" x 92" 142 x 234 92" 11
54" x 96" 137 x 244 62" x 104" 157 x 264 110" 12
67½" x 120" 171 x 305 80" x 128" 203 x 325 138" 13
81" x 144" 206 x 366 92" x 152" 234 x 386 165" 14
94½" x 168" 240 x 427 104" x 176" 264 x 447 193" 15
108" x 192" 274 x 488 116" x 200" 295 x 508 220" 16
121½" x 216" 309 x 549 134" x 224" 340 x 569 248" 17
135" x 240" 343 x 610 146" x 248" 371 x 630 275" 18
16:10 Format
50" x 80" 127 x 203 62" x 92" 157 x 234 94" 19
60" x 96" 152 x 244 68" x 104" 173 x 264 113" 20
75" x 120" 191 x 305 86" x 128 218 x 325 142" 21
90" x 144" 229 x 366 98" x 152" 249 x 386 170" 22
105" x 168" 267 x 427 116" x 178" 295 x 447 198" 23
120" x 192" 305 x 488 128" x 200" 325 x 508 226" 24
135" x 216" 343 x 549 146" x 224" 371 x 569 255" 25
150" x 240" 381 x 610 158" x 248" 401 x 630 283" 26
FocalPoint Leg Assembly Guides ......................................................................................................................... 27 29-
®
Assembly Instructions
FocalPoint™ Projection Screen by Draper
Frame/Screen Assembly
① Remove tarp from case and place on the ground.
② Remove frame pieces from case and place in the appropriate locations
on the tarp.
Please Note: For screens with Viewing areas of 18’ or larger Draper
ships a special corner labeled “Large Screen corner”. If you did not
order a complete screen do not use the standard “corner” for the large
screens. Contact Draper if needed.
Please Note: Each piece is color-coded: refer to FocalPoint™ Assembly
Map included with screen for correct layout (see reverse side).
Please Note: Frame pieces should be placed with "forks" running
counter-clockwise and DuraLoop Attachment Lugs facing out.
③ Assemble frame by inserting "forks" of each piece into extrusions on the
adjoining piece (see Fig. 1). Tighten by turning color-coded attachment
knobs (see Fig. 2).
④ Remove leg pieces from case and place in the appropriate locations on
the tarp.
⑤ Assemble leg according to color-coded assembly map by inserting "forks"
of front extension into extrusion on the leg base and tighten color-coded
attachment knobs. Also, attach vertical frame members in the same man-
ner. Do not yet attach the back extension to the leg base (see Fig. 3).
⑥ Place the screen frame on top of the legs (see Fig. 4).
Copyright © 2011 Draper Inc. Form FocalPoint_Inst11-R Printed in U.S.A.
®
Caution
① Read instructions through completely before proceeding; retain for future
reference.
② Handle viewing surface with care; do not allow it to come in contact with
sharp or dirty objects.
③ These instructions are based on assembly by a minimum of two people.
④ Make sure screen is level.
⑤ Do not write on viewing surface.
⑥ The ideal temperature range for assembling folding screens to prevent
damaging the surface is 68°-78° F (20°-26° C). Assembling below
recommended temperatures may damage surface and void warranty.
⑦ Do not permit screen fabric to contact border material or loops when
folded. Store in pouch provided.
If you encounter any diffi culties assembling your FocalPoint™, call your dealer
or Draper, Inc. in Spiceland, In di ana, 765-987-7999, or fax 765-987-7142.
Figure 1
⑦ Attach legs to frame (see Fig. 4) using provided Leg Cranks as follows:
Package A–3 cranks per leg; Package B–4 cranks per leg; and Package
C–5 cranks per leg. Leg Cranks should be placed as follows: 1 at the low-
est attachment point, 1 at the highest attachment point, and the rest evenly
spaced between the two.
⑧ Attach viewing surface to frame (see Fig. 5).
⑨ Raise FocalPoint into place (this step requires at least two people, depend-
ing on screen size) (see Fig. 6).
⑩ Attach the back extensions to the leg bases (see Fig. 7).
⑪ If provided, attach Anti-Sway Stabilizers to the frame and legs. First,
unhook the viewing surface from the bottom of the frame near the attach-
ment points. Attach ends with threaded hole through the square extrusion
to the fi fth visible hole in from each end of the screen. Attach end with
metal extension to the closest leg extrusion hole (see Fig. 8).
Please Note: You may need to use the built-in adjustment knob to short-
en or lengthen the Anti-Sway Stabilizer so it will reach holes (see Fig. 9).
⑫ If provided, attach HD Leg Braces to frame and legs. Attach ends with
threaded hole through the square extrusion to the frame. Attach end with
metal extension to the back foot extrusion (see Fig. 10).
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7
Caution:
Beware of
pinch points.
Figure 2
Figure 8
Figure 10
Figure 9
Adjustment
Knob
Patent
Pending
2' (61cm)
4' (122 cm) 2' (61cm)
4' (122 cm)
4' (122 cm)
4' (122 cm)
FocalPoint™ Projection Screen by Draper—Assembly Map
60" x 80" (152 x 203 cm) Image Area—4:3 Format
Copyright © 2010 Draper Inc. Form FocalPoint_60x80_Assy Printed in U.S.A.
®
Before you start:
• Spread the tarp (included).
• Assemble the frame and legs before attaching the screen
surface.
• Frame sections should be arranged so that:
➽ Viewing surface attachment posts are on the outside
of the frame
➽ Guide pins should point counterclockwise
➽ Bolt heads should face upward
All Pins
should point
counterclockwise.
Bolt heads should
face up.
2' (61cm)
Caution:
Beware of
pinch points.
For use with these part numbers
Black-Backed M1300 CineFlex
Silver Anodized Black Silver Anodized Black
385030 385086 385038 385094
Especificaciones del producto
| Marca: | Draper |
| Categoría: | pantalla de proyección |
| Modelo: | FocalPoint |
¿Necesitas ayuda?
Si necesitas ayuda con Draper FocalPoint haz una pregunta a continuación y otros usuarios te responderán
pantalla de proyección Draper Manuales
22 Septiembre 2024
14 Agosto 2024
12 Agosto 2024
24 Julio 2024
23 Julio 2024
21 Julio 2024
19 Julio 2024
pantalla de proyección Manuales
- pantalla de proyección Pyle
- pantalla de proyección Kodak
- pantalla de proyección Optoma
- pantalla de proyección Nec
- pantalla de proyección Da-Lite
- pantalla de proyección Luxburg
- pantalla de proyección Duronic
- pantalla de proyección EluneVision
- pantalla de proyección Celexon
- pantalla de proyección Stewart
- pantalla de proyección Instaal
- pantalla de proyección Elite ProAV
- pantalla de proyección KHOMO GEAR
- pantalla de proyección EPV
Últimos pantalla de proyección Manuales
11 Octubre 2024
6 Octubre 2024
2 Octubre 2024
29 Septiembre 2024
29 Septiembre 2024
27 Septiembre 2024
26 Septiembre 2024
20 Septiembre 2024
18 Septiembre 2024
18 Septiembre 2024