Extron MLC 104 IP Plus Manual de Usario
Extron
Afstandsbediening
MLC 104 IP Plus
Lee a continuación 📖 el manual en español para Extron MLC 104 IP Plus (16 páginas) en la categoría Afstandsbediening. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/16
Global Confi gurator 2.2,
MLC 226/104 Confi guration Program 3.1.1, and
System 5 IP Confi guration Program 3.1.1
Upgrade Guide
68-1313-01 Rev. A
08 06
PRELIMINARY
1
Global Configurator, Windows-based Control Programs
PRELIMINARY
Introduction
This installation guide provides step by step instructions on how to
• Upgrade to Global Configurator 2.2
• Upgrade from GC 2.0.x
• Upgrade from GC 2.1.x
• Upgrade to MediaLink 226/104 or System 5 IP Configuration Software 3.1.1
• Upgrade the System 5 IP with patch firmware (This includes information on how
to )retain IP settings after upgrading from version 1.0x to 2.00.
If you encounter problems with the following upgrades, please keep in mind that
Extron Technical Support (http://www.extron.com/company/contactus.asp) is only
a phone call or a few mouse clicks away.
Upgrading to Global Configurator 2.2: a Checklist
Prior to upgrading your existing Global Configurator (GC) project to GC 2.2, ensure
that the following four elements are present on your system.
cThe Global Configurator project file
For GC 2.0.x
• Original project files
For GC 2.1.x
• Original project files or
• Import a compressed project file (.gcc) or
• Import the file from an IP Link device
cThe Extron serial and IR drivers used in the project file
These drivers can be found
• On the Extron Web site (http://www.extron.com/iplinkdrivers)
• Via the Driver Subscription feature of GC 2.2
• Via the IR Learner software's user-defined IR drivers (.eir)
N Defective device drivers are routinely removed from the Extron Web site, so you
may find that some drivers are missing. Most of these drivers are replaced with
newer versions.
If a required device driver is missing after you open your project in GC 2.2, and
it cannot be found on the Extron Web site, search for an updated version of the
driver. When the correct driver is found, you must upgrade it for every IP Link
device in your network.
cThe minimum firmware version for the MLC products
Global Configurator 2.2 requires the following minimum firmware
versions. Any IP Link device with an earlier version requires a firmware
upgrade. This firmware can be obtained from the Extron Web site
(http://www.extron.com/iplinkdrivers).
• MLC 104 Series, version 1.03
• MLC 104 IP Series, version 1.03
• MLC 226 IP Series, version 1.05
N For IP Link devices that reside on a network, firmware can be easily upgraded
using IP Link File Manager 1.1.3 or later.
PRELIMINARY
Upgrade Guide, cont’d
Global Configurator, Windows-based Control Programs
2
PRELIMINARY
N If a firmware update is needed, execute the command after the EscZY reset
firmware is updated. See the firmware’s release notes for instructions.
cThe minimum firmware version for the System 5 IP products
Global Configurator 2.2 requires the following minimum firmware
version. Any IP Link device with an earlier version requires a firmware
upgrade. This firmware can be obtained from the Extron Web site
(http://www.extron.com/firmware).
System 5 IP Series, version 2.00
N For instruction on how to retain your System 5 IP settings when upgrading
the firmware from version 1.0x to 2.00, please refer to the System 5 IP Patch
Firmware Upgrade section.
c IP Link devices that are online
Upgrading to Global Configurator 2.2 requires that all IP Link devices
be online to successfully upload the configuration.
N When uploading files to devices, please note that any customized GlobalViewer
(GV) files, including those placed in the GC2 directory of an IP Link device,
must be uploaded the GC 2.2 upload process is complete. after
Upgrading from GC 2.0.x
Upgrading from Global Configurator (GC) 2.0 requires the original project file
(.gc2) and all of its device configuration files (.xml). The Import File option cannot
be used for this configuration.
Step 1: Open the GC project file.
1. Open the Global Configurator file by choosing from the menu Open... File
and choosing the file.
The following message box appears.
2. Click .OK
Step 2: Rebuild all devices in the configuration
1. From the menu, choose . The Upload Manager Build Build All Configurations
appears when the build is complete.
2. On the Upload Manager window, click .Begin
3. Click when the upload is complete.Close
Using this rebuild option saves your project in the new GC 2.2 format.
PRELIMINARY
Especificaciones del producto
Marca: | Extron |
Categoría: | Afstandsbediening |
Modelo: | MLC 104 IP Plus |
¿Necesitas ayuda?
Si necesitas ayuda con Extron MLC 104 IP Plus haz una pregunta a continuación y otros usuarios te responderán
Afstandsbediening Extron Manuales
18 Septiembre 2024
18 Septiembre 2024
18 Septiembre 2024
18 Septiembre 2024
18 Septiembre 2024
18 Septiembre 2024
Afstandsbediening Manuales
- Afstandsbediening Sony
- Afstandsbediening LG
- Afstandsbediening Philips
- Afstandsbediening Kenwood
- Afstandsbediening Motorola
- Afstandsbediening Medion
- Afstandsbediening Nikon
- Afstandsbediening Yamaha
- Afstandsbediening Canon
- Afstandsbediening Abus
- Afstandsbediening Alpine
- Afstandsbediening Arcam
- Afstandsbediening Brennenstuhl
- Afstandsbediening Hikvision
- Afstandsbediening Omega
- Afstandsbediening Silvercrest
- Afstandsbediening Nedis
- Afstandsbediening Thomson
- Afstandsbediening SilverStone
- Afstandsbediening Vivanco
- Afstandsbediening Meliconi
- Afstandsbediening Logitech
- Afstandsbediening Energy Sistem
- Afstandsbediening Harman Kardon
- Afstandsbediening Vision
- Afstandsbediening DataVideo
- Afstandsbediening Axis
- Afstandsbediening Benning
- Afstandsbediening Hama
- Afstandsbediening Velleman
- Afstandsbediening Technics
- Afstandsbediening Steren
- Afstandsbediening Perel
- Afstandsbediening Kicker
- Afstandsbediening Bose
- Afstandsbediening Steinel
- Afstandsbediening Clarion
- Afstandsbediening Grohe
- Afstandsbediening Marantz
- Afstandsbediening Genius
- Afstandsbediening AV:link
- Afstandsbediening Vello
- Afstandsbediening Cotech
- Afstandsbediening Insignia
- Afstandsbediening Unitron
- Afstandsbediening Danfoss
- Afstandsbediening Tascam
- Afstandsbediening Clas Ohlson
- Afstandsbediening Viper
- Afstandsbediening Konig
- Afstandsbediening Sweex
- Afstandsbediening Vizio
- Afstandsbediening EVE
- Afstandsbediening Metronic
- Afstandsbediening Technaxx
- Afstandsbediening One For All
- Afstandsbediening Hannspree
- Afstandsbediening Marmitek
- Afstandsbediening Delta Dore
- Afstandsbediening Niko
- Afstandsbediening Humax
- Afstandsbediening Vaddio
- Afstandsbediening Jung
- Afstandsbediening Lifetec
- Afstandsbediening Apart
- Afstandsbediening Msonic
- Afstandsbediening Revox
- Afstandsbediening CME
- Afstandsbediening Ruwido
- Afstandsbediening RGBlink
- Afstandsbediening Nexa
- Afstandsbediening Walkera
- Afstandsbediening EQ3
- Afstandsbediening Homematic IP
- Afstandsbediening REV
- Afstandsbediening Crestron
- Afstandsbediening ORNO
- Afstandsbediening Provision ISR
- Afstandsbediening Monacor
- Afstandsbediening Logilink
- Afstandsbediening Fortin
- Afstandsbediening Zalman
- Afstandsbediening Wet Sounds
- Afstandsbediening Swiss Sense
- Afstandsbediening Reely
- Afstandsbediening Exxter
- Afstandsbediening Medion MD6461
- Afstandsbediening Vimar
- Afstandsbediening TCM
- Afstandsbediening Antelope Audio
- Afstandsbediening Intertechno
- Afstandsbediening Heitech
- Afstandsbediening Sunwave
- Afstandsbediening AudioControl
- Afstandsbediening Lindy
- Afstandsbediening Glashart Media
- Afstandsbediening Innr
- Afstandsbediening Universal Electronics
- Afstandsbediening Voxx
- Afstandsbediening Audiofrog
- Afstandsbediening Memphis Audio
- Afstandsbediening AMX
- Afstandsbediening GBS Elettronica
- Afstandsbediening Mosconi
- Afstandsbediening Ridem
Últimos Afstandsbediening Manuales
23 Septiembre 2024
23 Septiembre 2024
23 Septiembre 2024
22 Septiembre 2024
22 Septiembre 2024
22 Septiembre 2024
20 Septiembre 2024
20 Septiembre 2024
19 Septiembre 2024
19 Septiembre 2024