Konig KN-HDMIREP10 Manual de Usario

Konig extensor AV KN-HDMIREP10

Lee a continuación 📖 el manual en español para Konig KN-HDMIREP10 (48 páginas) en la categoría extensor AV. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/48
KN-HDMIREP10
2
HDMI REPEATER
6
HDMI-REPEATER
10
PÉTEUR HDMI
14
HDMI-VERSTERKER
18
RIPETITORE HDMI
22
REPETIDOR HDMI
26
HDMI JELISMÉTLŐ
30
HDMI-SIGNAALINVAHVISTIN
34
HDMI REPEATER
38
HDMI PŘEVADĚČ
42
REPEATER HDMI
2
ENGLISH
Introduction:
Extend the HDMI cable distance up to 30 m with this device. Transfer the HDMI source signal
from one part of the room to the other without any signal loss.
Features:
No need of external power supply. (The power input is optional)
No system control required.
Extension: Extends usable HDMI cable distance up to 30meters
Signaling rates up to 1.65 GBps in support of UXGA and 1080p display
40 dB receiver equalization
Supports HDCP
Supports HDMI or DVI inputs
Speci cations:
Signal Inputs/Output
HDMI Connector type A 19pin female
Input DDC Signal 5 V p-p (TTL)
Maximum Single Link Range UXGA, 1080p
Data transfer speed 2.25 GBps X 3
Input Video Signal 0.5-1.0 V p-p
Resolutions (HDTV)
Interlaced(50&60Hz) 480i, 576i, 1080i
Progressive(50&60Hz) 480p, 576p, 720p, 1080p, 1200p
HDMI version HDMI 1.3
Environmental
Operating Temperature -5 °C to +35 °C
Operating Humidity 5% to 90 % RH (no condensation)
Storage Temperature -10 °C to +80 °C
Storage Humidity 5% to 90 % RH (no condensation)
Power Requirement
External Power Supply 5V DC@2A
Power Consumption 10 watts (max)
Regulatory Approvals
Converter Unit FCC, CE, UL
Power Supply UL, CE, FCC
3
Connections:
1) HDMI input port
2) Power adapter connection
3) HDMI output port
Connections and Operation:
Before installation, please make sure all devices you wish to connect have been turned off.
Connect the HDMI input source into the Repeater input port (cables are optional)
Connect the HDMI device into the Repeater output port.
Power on all input and output devices.
HDMI output HDMI Repeater
HDMI Monitor
Warning: If a DVI device does not appear to work, make certain that the device is HDCP
compliant. A non-HDCP compliant DVI device will not work with a signal that has HDCP
encoding present

Especificaciones del producto

Marca: Konig
Categoría: extensor AV
Modelo: KN-HDMIREP10

¿Necesitas ayuda?

Si necesitas ayuda con Konig KN-HDMIREP10 haz una pregunta a continuación y otros usuarios te responderán




extensor AV Konig Manuales

extensor AV Manuales

Últimos extensor AV Manuales