Pyle PDWM2135 Manual de Usario

Pyle micrófono PDWM2135

Lee a continuación 📖 el manual en español para Pyle PDWM2135 (6 páginas) en la categoría micrófono. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/6
VHF Fixed Frequency Wireless Microphone System
PDWM2135 • PDWM2140 • PDWM2145
PDWM2135 PDWM2140
PDWM2145
1
*Each Wireless Microphone System operates within the qualied wireless
operating frequency range listed as: 174-216MHz.*
This microphone system operates on high-eciency, low-consumption
discharging techniques. Performance features include independent
developed mobile frequency compression,expander circuitry, image
frequency limiting circuits, multiple-checked silent and noise-free circuits,
antenna diversity receiving circuit & switch impact noise defeat circuits.
The PDWM2135 - PDWM2140 - PDWM2145 were manufactured to be easy to use
and still give you professional performance quality.
Simple Installation and Operation:
* Please note- select models come equipped with dierent transmitters
and microphones.
Unscrew the bottom of the microphone (or slide open the battery compartment
tray of the belt-pack transmitter) to install two 'AA' Batteries. Screw the Battery cap
back on.
Plug your receiving unit into your mixer or amplier with a 1/4" mono microphone
cord.
Plug the receiving unit into your electrical wall outlet.
Turn the receiver by using the switch located at the front of the unit.ON ON/OFF
There is a switch located on each of the two microphones that turns each
microphone & mutes them individually.ON/OFF
2
FEATURES AND SPECIFICATIONS
PDWM2135
System Features:
VHF Narrow Band Receiver System
Dual Frequency Design (Channel A/B)
High Signal/Noise Ratio Performance
Broad Frequency Response Range & Low Distortion
Independent Adjustable Volume Control
Dual Independent Channel Antennas
RF Signal and AF Signal LED Indicators
Radio Frequency and Audio Frequency
Handheld Microphones:
RF Power Output: >13dBm
Modulation Degree: >30KHz
Power Current: <110mA
Harmonic at Higher Degree: <60dB
Modulation Pattern: FM
Battery Powered, Require (2) x 'AA' Batteries -Each
System Receiver:
Sensitivity: -95dBm (S/N:12dB)
RF Image Rejection:-75dB
Audio Dynamic Range: 95dB
T.H.D.: <1%
S/N Ratio: >70dB
Neighboring Channel / Interference: >70dB
Power: AC 120V, 60Hz
Receiver Dimensions (L x W x H):
8.07'' x 5.75'' x 1.64''
What's in the Box:
Receiver Base
(2) Handheld Microphones

Especificaciones del producto

Marca: Pyle
Categoría: micrófono
Modelo: PDWM2135

¿Necesitas ayuda?

Si necesitas ayuda con Pyle PDWM2135 haz una pregunta a continuación y otros usuarios te responderán




micrófono Pyle Manuales

micrófono Manuales

Últimos micrófono Manuales