Pyle PDWM8300 Manual de Usario

Pyle micrófono PDWM8300

Lee a continuación 📖 el manual en español para Pyle PDWM8300 (10 páginas) en la categoría micrófono. Esta guía fue útil para 15 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/10
8-Ch. Conference Wireless Microphone System
PDWM8300
with (8) Tabletop Goosenecks Mics
www PyleUSA com
2
www PyleUSA com
3
FOREWORD
Please read this manual thoroughly before you attempt to set up and use the
Wireless Microphone System. It contains a range of installation suggestions as
well as instructions to ensure safe usage. Installed properly, you can expect
years of trouble-free service from this product.
Main Features
1. Using VHF 170-215.8 VHF band to avert interferencing frequency.
2. Using multi level high frequency and mid frequency narrow band lter, so as
to dispel any possible interferencing signals.
3. A specially designed circuit switch is on the phone. It is for clearing up waves
of miscellaneous signals
4. All use quartz crystal oscillating circuits, so the frequency is very steady.
5. With audio compressing-expanding technology, the machine can lower
noises and increase the dynamic range. It can also lower reecho.
6. It has separate channel and mix output, and it can be connected with the
sound-adjusting stage and the karaoke enlarge.
7. Special key tone locked identity functions to avoid interference signal
from outside. Opens the mute system.
8. There are multiple noise detect multi-circuits. With strong anti-jamming
function.
9. Uniform cardioid pickup pattern isolates the main sound source and minimizes
background noise
10. Eective, built-in spherical wind and pop lter.
11. Longest distance in open:100m. Idealest distance in open: 50m
Cautions
1. Please ensure to place the host receiver in a place where it has good condition
for signal, without dead angle.
2. Please keep the microphone transmitter from throwing, casting, and so on.
Care should be taken to protect against breaking.
3. Non-waterproof. Protect the receiver from rain or water to prevent a short
circuit.
4. Please keep distance with or away electromagnetic eld, high voltage
power net or big metal subjects.
5. Please switch the transmitter when you change the battery.OFF
6. Please put out the battery if you will not use the microphone for a long time.
7. Please plug out the reciever if you will not use the microphone for a long time.
8. If any part of the product is damaged, please contact your dealer/distributor
or nearest service center
9. This warranty does not cover service or parts to repair damage caused by
accident, neglect, abuse, normal & wear, disaster, misuse, abuse, overpowering,
negligence, inadequate packing or shipping procedures and service, repair or
any modications to the product which have not been authorized or
approved by PyleUSA.
TECHNICAL PARAMETERS
Unit Specication
Frequency range
Frequency stability
Modulation
Frequency response
T.H.D
Distance
Temperture
Reciever
Receiving system
Sensitivity
Removing weight
Audio output
Output connection
Power supply
170-215.8MHz VHF band
±0.005%
FM
40Hz-18KHz (3dB)
-0.8%
50-100M
14-131°F (-10-55°C)
Quartz crystal frequency
10UV/40DB emf
50ms
0-0.35Vp-p 5k
6.3 mm plug
DC:12-17 V

Especificaciones del producto

Marca: Pyle
Categoría: micrófono
Modelo: PDWM8300

¿Necesitas ayuda?

Si necesitas ayuda con Pyle PDWM8300 haz una pregunta a continuación y otros usuarios te responderán




micrófono Pyle Manuales

micrófono Manuales

Últimos micrófono Manuales