Pyle PDWMU115 Manual de Usario

Pyle Microfoon PDWMU115

Lee a continuación 📖 el manual en español para Pyle PDWMU115 (2 páginas) en la categoría Microfoon. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/2
www.PyleUSA.com
UHF Wireless Microphone
PDWMU115
Wireless Transmitter with Universal Plug-and-Play Audio
Product Introduction
UHF all-purpose wireless microphone is suitable to all kinds
of audio equipment as much as PA system.
The standard 3.5mm plug convertable to 6.5mm
plug is very convenient. Stable signals, sounds loud and clear.
Function Introduction
Operation
1. Switch Order: Dial the switch of the receiver to ON, then dial the switch of headset
microphone to ON.
2. Frequency conversion/frequency conversion steps:
A. Automatic Frequency: When the receiver and microphone are turned , the ON
reception indicator (blue) changes from ashing to constant light, and the head-
mounted emission indicator (red) changes from ashing to constant light.
B. Manual frequency conversion: Keep the receiver and wore a transmitter in the
open, and let the receiver light with the launch of the lamp head 15 cm distance
corresponding to each other, and then press and hold M button on the trans-
mitter for three seconds, receiver light’s blue and launch the red light ashing
began to sweep at the same time, when the lights stop ashing and stays on,
the frequency conversion succeed. Press mode button of transmitter one timeM
to change frequency.
3. When the receiver is charging using the charger, the charging indicator Charging:
light is bright red; When the charging is complete, the indicator lights o.
4. Volume Adjustment: the default volume of power is 5 level (medium volume),ON
adjust V+ to increase the volume and to decrease. The volume level is not saved.V-
The default volume is turned .ON
Power switch
USB Charging
Volume -
Volume +
MODE
3.5mm plug
USB Charging
Power switch
ww w.PyleUSA.com
Features:
Convenient Microphone Voice-Over
Already Paired Device before Using
Simple Plug-and-Play Operation
Integrated Low Noise Circuitry
Noise-Eliminating SMT Technology
Crisp Audio Clarity for Vocals & Singing
Connect & Stream Audio to External
Devices
1/4'' -inch (6.3mm) Wired Microphone
Input
Rear Panel 1/4'' -inch (6.3mm)
Unbalanced Mixed Output
Rear Panel Aux (3.5mm) Audio Input/
Output Jacks Perfect for Professional
Audio Stage & Studio Performances
What's in the Box:
Headset Microphone
USB Charging Cable
Audio Connection Cable
Receiver Unit
Handheld Transmitter Specs:
Carrier Frequency: U Band
Frequency Stability: <0.002%
Transmit Power: 10mV
Current Consumption: <25mA
Harmonic: Main wave 40dB
Standard: Not Fixed Frequency
(Frequency Range:530 550MHz)
Pickup: 6000 Single Directivity
Battery Operated: 2*AA/MIC
(not included)
Antenna: Built-in
Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
Receiver Specs:
Receiving Frequency: U Band
Frequency Stability: <0.002%;
Sensitivity: 2mV
Interference Frequency Ratio > 90dB;
Image Interference Ratio: >88dB
Signal to Noise Ratio: >95dB;
Audio Output: 800mV-1.4V
Working Range: Standard conditions
30 to 50 m
Receive Channel: 2
Supply Voltage: 5V
Battery Type: 1000mAh, Polymer
Open Circuit Sensitivity: >115 dB
Frequency Response: 100Hz-10kHz
Output Impedance: 600 Ohm, +/-3dB
(0dB=1V/Pa @ 1kHz)
Power Consumption: 3W
Antenna: Universal Antenna
Product Dimension (L x W x H):
0.49'' x 0.49'' x 0.16'' -inches

Especificaciones del producto

Marca: Pyle
Categoría: Microfoon
Modelo: PDWMU115

¿Necesitas ayuda?

Si necesitas ayuda con Pyle PDWMU115 haz una pregunta a continuación y otros usuarios te responderán




Microfoon Pyle Manuales

Microfoon Manuales

Últimos Microfoon Manuales