Pyle PSW101CM Manual de Usario

Pyle micrófono PSW101CM

Lee a continuación 📖 el manual en español para Pyle PSW101CM (8 páginas) en la categoría micrófono. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/8
Warning: Some TV require two people to lift, as we are not responsible for any
personal injury or product damage due to mishandling.
W
W
W
Warning:
arning:
arning:
arning:
Fig 3a Fig 3b
Step 3: Hanging display
Firstly lift the bracket mounted display over the wall mount. And then hook the
brackets over the top of the wall mount. Rotate the display let the bottom of the
brackets hook over the bottom of wall mount, as shown in Fig.3a. Then put safe
bolts into the bottom of the brackets and lock it, as shown in Fig.3b.
Step
Step
Step
Step 3:
3:
3:
3: Hanging
Hanging
Hanging
Hanging display
display
display
display
-8-
Multifunctional double deck wall mount
INSTALLATION GUIDE
IMPORTANT: If dont understand about right install ways, please
consult to normal installing specialist.
IMPORT
IMPORT
IMPORT
IMPORTANT
ANT
ANT
ANT:
:
:
:
Thank you for choosing our products
Thank
Thank
Thank
Thank you
you
you
you for
for
for
for choosing
choosing
choosing
choosing our
our
our
our products
products
products
products
Tilt Flat Panel TV Bracket
Easy installing: Just hang up the display
Safety: locking by spinning bolt on the bottom
Max load capacity:60kg/132lbs
TV size range: 42 ~65
Adjustable angle: 5 15
" "
- ~
Inside has balance adjust system
leveler system
4
2,3
1
UP
UP
After determining the height of stand, follow the installation instructions in below
to install wall mount to different kinds of wall -wooden, concrete.
Usin g a aw l or nail to make where the nails are located , as sho wn as fi g.2b . Distance
between two nails for fixing wall mount must not less than 12. Pre-drill these holes
with a 5mm drill bit to at least 50mm in deep hole. Please make sure these holes are
level and located at center. Use wall mount as a template to mark the location of other
three holes and drill the same holes. Fix the wall mount to the wall with 4 long bolts(J)
and washers(L).
Wooden wall:
W
W
W
Wooden
ooden
ooden
ooden wall:
wall:
wall:
wall:
-2- -7-
1
23
4
Hardware List: Actual parts may appear slightly different than
illustrated.
Hardwar
Hardwar
Hardwar
Hardware
e
e
eList:
List:
List:
List:
6
6
6
4
I
J
K
L
M
Square washer
Long bolt
Wall anchor
Long bolt washer
Spacer
ID Description
1
2
A
3
B
C
1
1
4
1
4
4
Wall mount
Left bracket
Right bracket
M4 mm×12 bolt
M4 mm×16 bolt
M5× mm16 bolt
M6× mm16 bolt
M8×16mm bolt
M ×36mm5 bolt
M6×36mm bolt
M ×36mm8 bolt
Qty
D4
4
4
4
4
4
E
F
G
H
4 2 Safe bolt
A-H LI KJ M
ID DescriptionQty
Fig 2b Fig 2c
Concrete wall:
Using the wall mount as template to mark 6 holes location on the wall. Th ee holes are
located at the top row of the slots and three more are located at the bottom row. The
outer holes must be fall to the left and right of the two holes in the middle of the
mount. Please make sure these holes are level and at least 6 between any two lines.
Pre-drill these holes with a 10mm drill bit to at least 50mm deep hole. Insert Wall
anchors(K) into each of these holes. Attach the wall mount to the wall using 6 Long
bolts(J) and washers(L).
r
Concrete
Concrete
Concrete
Concrete wall:
wall:
wall:
wall:
J
1
L
Balance-adjusting
Using balance-adjusting system on the plate, make sure whether wall plate is installed
balance. If not, then slide the wall plate let pointer level in the center position.
UP
UP

Especificaciones del producto

Marca: Pyle
Categoría: micrófono
Modelo: PSW101CM

¿Necesitas ayuda?

Si necesitas ayuda con Pyle PSW101CM haz una pregunta a continuación y otros usuarios te responderán




micrófono Pyle Manuales

micrófono Manuales

Últimos micrófono Manuales