TDE Instruments Digalox DPM72-AV Manual de Usario

TDE Instruments Equipo de medición Digalox DPM72-AV

Lee a continuación 📖 el manual en español para TDE Instruments Digalox DPM72-AV (7 páginas) en la categoría Equipo de medición. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/7
Digalox DPM72-AV
Instructio
Package contents:
Panel me
1. Intended use
• Indoor use non
condens
• Panel mounting.
•
Failure to comply with th
2. Safety instructions
•
Note: the measuremen
voltages!
• When working on the
d
the device!
•
The device must not be
shutdown.
•
Read instruction manual
•
The device is not intende
devices must be used to
• When
connecting switch
whose isolation voltage
i
voltage. For example,
least 500V.
• Do not open the
housing
• Do not use
the instrumen
• All cables
carrying hazar
separators.
----- ----- 1
on manual
(Rev-2015-04)
ter Digalox DPM72,
5x jumpers, 1
x
ing
, non corrosive.
ese instructions will
void
all guaran
t inputs of the device can carry l
device
hazardous voltages must
e used as the only protective dev
carefully before operating the devi
ed to protect persons or facilities ag
guarantee safety (protection
relays
es
to the terminals J1-J6 only
switc
s at least
twice the
maximum occu
hen measuring
250V AC switch
mu
g!
nt
in the presence of explosive or
fla
rdous
voltages must be secured
wit
x
mounting bracket
tee and warranty.
ife
-threatening
not be connected
to
vice or protective
ce!
gainst harm. Specific
s
, off-switches, etc).
ches must
be used
rring
measurement
ust be isolated
for at
ammable substances!
th external
3. Description
The measuring modes V
ol
are supported. Scale
endp
signal and current transfor
switch,
alternatively the op
used. The unit can be swit
external switch. Minimum
optionally using an extern
a
of 3 minutes up to 14 days
history can be activated by
----- ----- 2
lt AC/DC,
A
mpere, frequency and 5
point of the indicator as well as scal
rmer measurement can be adjusted
ption for automatic adaption of the s
tched between volt and ampere me
and maximum values are recorded
al switch. Measure values are recor
s. The
time base
as well as the disp
y an external switch.
Front
1
Measure mode t
2
Upper scale cap
3
Graphical measu
4
Digital measurem
Back
1 DIP switch for
s
mode and
uppe
2
Supply voltage
3 Jumpers for
con
connection exte
activating/switch
mode,
graphica
min/
max display
4
Measurement in
5A current transformer
ing of the analogue
d freely via the DIP
scale
endpoint can be
asurement via an
and can be displayed
rded over a
time span
play of the measuring
ext
tion
urement
display
ment value
etting
measurement
r
scale caption
input
nfiguration
or
ernal
switch for
hing
measurement
l historic data
display,
y
, auto-scaling
nputs
----- ----- 3
4. Electrical Connections
The device may only be operated in one of the connection options shown below.
5. Configuration
The device can be configured via DIP switches and jumpers.
Scale
In modes where a scaling is necessary to represent the correct measurement value
(for example 5A AC for current transformer) the upper scale value corresponds to
the primary value of the current transformer. Example:
upper scale value = 50 = primary value of the current transformer
Configuration via DIP switches and jumpers if only one measurement mode is
required (Manual mode)
1. Set DIP switch 10 to ON position.
2. Set measurement mode with jumpers at J4-J6 according to table "Measurement
mode”, column “Manual mode".
3. Set upper scale caption for the first measurement mode with DIP switches 1-9
(see “Configuration of the upper scale caption”).
4. Connect supply voltage.
DPM72 AV/P
Voltage and current
direct measurement
I
low
I
high
U
high
U
low
U
s
U
s
Load
+/L -/N
max.
10A
Measurement inputs
10-24V
Supply
Fuse 250mA
max.
500V
DPM72 AV/P
Voltage direct, current via
current transformer
I
low
I
high
U
high
U
low
Load
+/L -/N
Current
transformer
Measurement inputs
max.
500V
U
s
U
s
10-24V
Supply
Fuse 250mA

Especificaciones del producto

Marca: TDE Instruments
Categoría: Equipo de medición
Modelo: Digalox DPM72-AV

¿Necesitas ayuda?

Si necesitas ayuda con TDE Instruments Digalox DPM72-AV haz una pregunta a continuación y otros usuarios te responderán


Equipo de medición TDE Instruments Manuales

TDE Instruments

TDE Instruments Digalox DPM72-AVP Manual de Usario

2 Septiembre 2024
TDE Instruments

TDE Instruments Digalox DPM72-MP Manual de Usario

2 Septiembre 2024
TDE Instruments

TDE Instruments Digalox DPM72-PP Manual de Usario

1 Septiembre 2024
TDE Instruments

TDE Instruments Digalox DPM72-MPP Manual de Usario

31 Agosto 2024
TDE Instruments

TDE Instruments Digalox DPM72-MPPA Manual de Usario

31 Agosto 2024
TDE Instruments

TDE Instruments Digalox DPM72-MPN Manual de Usario

31 Agosto 2024
TDE Instruments

TDE Instruments DPM961 Manual de Usario

30 Agosto 2024
TDE Instruments

TDE Instruments Digalox DPM72-AV Manual de Usario

30 Agosto 2024

Equipo de medición Manuales

Últimos Equipo de medición Manuales

PeakTech

PeakTech 1207 Manual de Usario

26 Octubre 2024
Kern

Kern FL 1KG Manual de Usario

25 Octubre 2024
PeakTech

PeakTech 6193 Manual de Usario

25 Octubre 2024
PCE Instruments

PCE Instruments PCE-TUM 50 Manual de Usario

24 Octubre 2024
PCE Instruments

PCE Instruments PCE-325D Manual de Usario

23 Octubre 2024
PCE Instruments

PCE Instruments PCE-AM 30 Manual de Usario

23 Octubre 2024
PCE Instruments

PCE Instruments PCE-900 Manual de Usario

23 Octubre 2024
PCE Instruments

PCE Instruments PCE-CSM 10 Manual de Usario

23 Octubre 2024
PCE Instruments

PCE Instruments PCE-CSM 7 Manual de Usario

23 Octubre 2024
PCE Instruments

PCE Instruments PCE-CSM 3 Manual de Usario

23 Octubre 2024