Thermocet Color Manual de Usario

Thermocet Endurecer Color

Lee a continuación 📖 el manual en español para Thermocet Color (32 páginas) en la categoría Endurecer. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/32

Page 1

OPERATING AND INSTALLATION INSTRUCTIONS

HI-FIRE COLLECTION

BASE UNIT

GREAT BRITTAN-GB IRELAND-IE

Page 2

TABLE OF CONTENTS

1. General Page 3

1.1 Contents of the packaging

2. Safety device Page 4

2.1 Safety

3. Remote control Page 5

3.1 General

3.2 Manual transmitter

3.3 Screen setup

3.4 Time setup

3.5 Setting the desired temperature

3.6 Setting the Timer

3.7 Changing the signal codes

3.8 Controls (AB)

3.9 Possible error messages

3.10 Setting the flame size/ Extinguishing the fire

3.11 Switching the unit off

3.12 Replacing the batteries

4. Manual control Page 8

5. Initial start-up Page 9

5.1 Daily maintenance

5.2 Important tips

6. Installation instructions Page 10

7. Concentric flue system Page 11

7.1 Components of the concentric flue system

7.2 Construct concentric flue system

7.3 Installation instructions regarding existing flues.

7.4 Parts.

7.5 Installation

7.6 Cleaning and maintenance

8. Instructions for the Mertik Maxitrol GV60 and the Remote Control: Page 16

9. Maintenance check-list Page 19

10. Maintenance Page 20

11. Installing the unit Page 21

11.1 C omponents of the round and flat shaped combustion chamber

11.2 Connection to the gas pipes

11.3 Installing the ceramic wood blocks

12. Options for connecting the concentric flue system Page 22

12.1 Direct exterior wall duct

12.2 Indirect exterior wall duct

12.3 Roof termination without slope

12.4 Roof termination with 45º slope

12.5 Roof termination with 90º slope

12.6 Connection to existing flue pipe

12.7 Installing the restriction plate (O) and (P)

13. Technical details Page 23

13.1 Gas-technical specifications

14. Problems and possible solutions Page 24

Illustrations Page 24 –30

(0/07012008)

Page 3

We hope you really enjoy the warmth of your new gas fire Read these instructions carefully before

installing and using the gas fire. Keep these instructions in a safe place. Always provide the following

information if the gas fire breaks down: model and serial number, which can be found on the unit. Your

purchase invoice is your proof of warranty.

1. General

The entire unit is delivered to you with your choice of mantle and/or accessories. See the installation instructions

for the relevant mantle and/or accessories that are packaged separately from the unit. Check the unit immediately

after delivery to confirm that it has not been damaged during transport. If it is damaged in any way, please

inform your supplier immediately and provide as many details as possible. Your fire has been finished with

special paint that can withstand extremely high temperatures. Allow the fire to burn at the highest setting and

ventilate the room thoroughly during the first hours of use. As the paint is cured, this will cause a non-hazardous smell and/

or some smoke to be emitted. Any deposit on the heat-resistant glass should be removed immediately using a

fireplace cleaner suitable for heat-resistant glass.

Attention

The unit must be installed, connected and checked by a qualified fitter based on national, regional, and local

standards and regulations. The fitter must inspect the unit for tightness in relation to gas and combustion

products and correct operation of the different components and functions. The flue tube system and the outlets in

the outer wall or roof face must also meet the requirements of the applicable regulations. The unit falls in the

closed unit category, in a set-up location without a fan and with a chimney loss that is greater than 17 % (non-

condensing).

Warning

Gas fires become hot when in use. Therefore care should be taken, for example, by keeping children and those

requiring help away from the immediate vicinity of burning fires. Gas fires must not be placed on or against

flammable materials (curtains, etc.).

1.1 Package contents:

1 x Base unit

1 x Wood mixset

1 x Operating and installation instructions

1 x Remote control

1 x Restriction plate and Restriction plate ø 65

1 x Radiation plate

1 x 9 volt battery

4 x AA 1.5V batteries

1 x 45º Bend Ø100/150

Especificaciones del producto

Marca:	Thermocet
Categoría:	Endurecer
Modelo:	Color
Colocación del dispositivo:	Vrijstaand
Tipo de operación:	Buttons, Rotary
Pantalla incorporada:	Ja
Peso.:	39500 g
Ancho:	598 mm
Profundidad:	545 mm
Altura:	846 mm
Impuesto neto:	900 W
Sistema de secado:	Warmtepomp
Temporizador de inicio retrasado:	Ja
Retraso del inicio:	24 uur
Indicación de tiempo restante:	Ja
Bloqueo infantil:	Ja
Número de programas de secado:	15
Nivel de ruido:	64 dB
Clase-de-eficiencia-energética:	A++
Consumo-anual-de-energía:	236 kWu
Peso del embalaje:	40500 g
Ancho del embalaje:	650 mm
Empaquetadura en profundidad:	550 mm
Altura del embalaje:	885 mm
Actual:	4 A
Hora de apagar:	30 min
Pies ajustables:	Ja
Ajuste de pies:	15 mm
Señal de advertencia:	Ja
Número de ajustes de temperatura:	2
Longitud de la manguera de drenaje:	1.3 m
Número de pies ajustables:	4
Consumo de energía (mantenerlo encendido):	1 W
Consumo de energía (cuando está apagado):	0.47 W
Iluminación en tambor:	Ja
Indicador LED de progreso del programa:	Ja
Temperatura ambiente (mín.):	5 °C
Temperatura ambiente (máx.):	40 °C
Número de niveles de secado:	3
Interruptor de seguridad:	Ja
Consumo de energía por ciclo (carga parcial):	1.08 kWu
Capacidad nominal:	8 kg
voltaje-de-entrada-de-CA:	230 - 240 V
Frecuencia-de-entrada-de-CA:	50 Hz
Tipo-de-visualización:	LED
Reinicio del filtro indicador:	Ja
Indicador de tanque de agua lleno:	Ja
Programas de secado:	Cotton cupboard dry, Cotton eco, Cotton, Down wear/duvet, Gentle care, Hygienic drying, Hygienic freshen-up, Jeans/denim, Mix, Outdoor/sport, Shirts, Synthetics, Timed, Towel, Xpress super short
Tiempo de ciclo ponderado:	156 min
Tiempo de ciclo (carga parcial):	125 min
Eficiencia de condensación:	81 procent
Eficiencia de condensación (carga parcial):	81 procent
Sistema de seguimiento automatizado de clasificación de productos básicos (CCATS):	84512100
Herramientas necesarias:	Standaard gereedschapskist
Capacidad de calentamiento:	0 W
Peso del embalaje de poliestireno expandido (EPS):	756 g
Zumbador apagado:	Ja
Operación de tambor inverso:	Ja
Peso del embalaje de papel:	336 g
Peso de los envases de plástico.:	192 g
Tecnologías Beko (cuidado de la ropa):	Automatic Anti-Creasing Function
Alimentación enchufable:	13 A
Se requiere instalación profesional:	Ja
Retención de repuestos:	7 jaar
Secado en frío:	Ja
Indicador de nivel de sequedad:	Ja