Thermocet Flat Fire M Manual de Usario
Lee a continuación 📖 el manual en español para Thermocet Flat Fire M (30 páginas) en la categoría Endurecer. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/30
Page.1
Flat Fire M
OPERATING AND INSTALLATION INSTRUCTIONS
Page.2
CONTENTS
1. General Page 3
Important information
Guarantee
Contents of package
2. Operating instructions Page 4
The remote control unit and its function
Function of the remote control
Setting of the desired night temperature
Setting of first period of heating
Igniting of the apparatus
Preparations for installing the Flat Fire Page 6
3. Installation instructions Page 6
General instructions
Distances to non- combustible materials.
Components of the fire
Installing the fire
Removing the burner
Connection to the gas main
4. Concentric duct system Page 7
Components
Connection options
5. Structure of concentric duct system Page 9
6. Gas specifications Page 10
7. Technical specifications Page 10
8. Additional instructions for the Mertik Maxitrol GV60 and the remote control Page 11
9. Problems and possible solutions to them Page 12
Drawings and picture Page 13-14
Concentric Flue system article numbers Page 15
Template Page 15
Wiring diagram Page 16
Important tips Page 17
Guarantee certificate and registration card
Guarantee conditions Page 18
SUBJECT TO CHANGE WITHOUT NOTICE
(0/19072007)
Page.3
We hope you really enjoy the warmth of your new gas fire Read these instructions carefully before install-
ing and starting to use the gas fire. Keep these instructions in a safe place. Always provide the following
information if the gas fire breaks down: type and serial number.
1. General
The Stove is supplied as a complete unit. Check the unit immediately after delivery to confirm that it has not
been damaged during transport. If it is damaged in any way, then please inform your supplier immediately and
provide as many details as possible Your fire has been enamelled using heat-resistant enamel that can withstand
extremely high temperatures. Allow the fire to burn at the highest setting and ventilate the room thoroughly dur-
ing the first hours of use. As the enamel is cured, convection will cause a non-hazardous smell and/or some
smoke to be emitted. Any deposit on the heat-resistant glass should be removed immediately using a cleaner suit-
able for heat-resistant glass.
Attention
The Unit must be installed, connected and inspected by a qualified fitter according to national and regional stan-
dards. The fitter must inspect the unit for tightness in relation to gas and combustion products and the correct op-
eration of the different components and functions.
Make sure that local gas supply is in correspondence with type of unit.
The flue tube system and the outlets in the outer wall or roof face must also meet the requirements of the appro-
priate regulations.
The concentric unit falls in the closed unit category in a set-up location without a fan and with a chimney loss
that is greater than 17 % (non-condensing).
Warranty
The registration/warranty card (see page 19 and 20) should be completed and sent to the manufacturer within ten
days after the purchase date. Please retain the warranty certificate. The type and serial number are listed on the
identification plate that you can find on the inside of the bottom of the Unit cover
Contents of package:
Flat Fire M ( See Page 13 fig. 2 ) with Decorative Window
Flat Fire M ( See Page 13 fig. 3 ) with Decorative Steel Front
1 x Completely assembled fire
1 x Operation and installation instructions
1x Remote control
1 x Guarantee card
4 x Cotter bolts
1 x Restriction sheet iron
1 x Decorative Steel Front or Decorative Window to choice
1x bag with lava stones
1x battery 9V
4x battery 1,5 V AA
Especificaciones del producto
| Marca: | Thermocet |
| Categoría: | Endurecer |
| Modelo: | Flat Fire M |
¿Necesitas ayuda?
Si necesitas ayuda con Thermocet Flat Fire M haz una pregunta a continuación y otros usuarios te responderán
Endurecer Thermocet Manuales
8 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
Thermocet Trimline 83 Corner Left DB - 1182 Manual de Usario
8 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
Endurecer Manuales
- Endurecer Toolland
- Endurecer OneConcept
- Endurecer Landmann
- Endurecer Dimplex
- Endurecer Perel
- Endurecer Well Straler
- Endurecer Qlima
- Endurecer Dovre
- Endurecer Napoleon
- Endurecer Faber
- Endurecer Blumfeldt
- Endurecer Manor House
- Endurecer Edilkamin
- Endurecer Hwam
- Endurecer Bellfires
- Endurecer Xaralyn
- Endurecer Livin Flame
- Endurecer Spartherm
- Endurecer Brula
- Endurecer Stuv
- Endurecer Haas-Sohn
- Endurecer Thermorossi
- Endurecer Saey
- Endurecer M-design
- Endurecer Element4
- Endurecer Wanders
- Endurecer Blackline
- Endurecer JAcobus
- Endurecer Italiana Camini
- Endurecer Olsberg
- Endurecer Brunner
- Endurecer DRU
- Endurecer Ruby Fires
- Endurecer Hergom
- Endurecer Mondena
- Endurecer Godin
- Endurecer Kalfire
- Endurecer Barbas
- Endurecer Icon Fires
- Endurecer Big Fire
- Endurecer Jydepejsen
Últimos Endurecer Manuales
18 Octubre 2024
5 Octubre 2024
26 Septiembre 2024
23 Septiembre 2024
22 Septiembre 2024
21 Septiembre 2024
19 Septiembre 2024
17 Septiembre 2024
16 Septiembre 2024
16 Septiembre 2024