Thermocet VERSA LV-HV Manual de Usario
Lee a continuación 📖 el manual en español para Thermocet VERSA LV-HV (14 páginas) en la categoría Endurecer. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/14
Page.1
OPERATION AND INSTALLATION MANUAL
VERSA LV/HV
Page.2
CONTENTS
1. GENERAL Page 3
1.1 Delivery
1.2 Contents of packaging
1.3 First firing
1.4 Guarantee
2. OPERATING INSTRUCTIONS VERSA Page 3
2.1 Igniting
2.2 Operation of thermostat
2.3 Operation of glow-effect burner
2.4 Operation of fan
2.5 Switching off the fire
2.6 Maintenance
3. OUTLET SAFETY (T.T.B.) Page 4
4. ELECTRICAL INSTALLATION INSTRUCTIONS Page 5
5. GAS INSTALLATION INSTRUCTIONS Page 5
5.1 General instructions
5.2 Preparations for installing the fireplace
5.3 Installing the fireplace Page 6
6. DISMANTLING OF BURNER UNIT AND FAN Page 7
7. DISMANTLING OF T.T.B. BRACKET Page 7
8. LIST OF PARTS Page 7
9. GAS SPECIFICATIONS Page 8
DRAWINGS Pages 9/10
PHOTOGRAPHS LOG SET Page 11
Important tips Page 25
Guarantee certificate and registration card
Guarantee conditions Page 26
SUBJECT TO ALTERATIONS
NG 04240104 (2/22092003)
Page.3
We wish you happy heating with the purchase of this ThermoCet recessed gas fireplace. Please read
these instructions thoroughly before installing and using the fireplace. Keep these instructions care-
fully. Always state model and serial number in the event of a breakdown.
1. GENERAL
1.1 Delivery
You should inspect the appliance for damage in transit, immediately it has been delivered. If it is damaged,
you should report this without delay and as precisely as possible to your supplier. Please refer to the delivery
document.
1.2 Contents of packaging
1 x Completely assembled appliance
1 x Operation and installation manual
1 x Warranty card
1 x Pipe mouth with 4 self-tapping screws for connection of outlet
1.3 First firing
Your fireplace is coated with heat-resistant enamel that can withstand extremely high temperatures. Burn the
fire at high during the first hours of use and ventilate the room well. The curing of the enamel may produce a
smell/smoke, but this is harmless, however. Any marks on the glass can be removed immediately with glass
cleaner.
1.4 Guarantee ( see page 13 and 14)
Always complete your guarantee card in full and return it to your supplier immediately after purchase. Type
and serial number are shown on the plate that you will find on the bottom of the burner unit.
2. OPERATING INSTRUCTIONS VERSA
The Versa has a combined glow-effect and main burner (see page 10 figure 4). This burner can be operated
with either the thermostat knob (A) or the manual slide (B). You select the required setting with the thermo-
stat knob (A) and the modulating thermostat provides the right temperature. The hand-operated slide (B) al-
lows you to select the flame height you wish and the burner will continue to burn at that setting until you
change the selected setting.
2.1 Igniting.
* Open the gas stopcock fitted in the gas pipe to the appliance.
* Ensure that the thermostat knob (A) is at position n in the initial setting.
* Turn the thermostat knob (A) to the ignition position.ô
* Push the thermostat knob (A) and keep it pushed in.
* Push the ignition knob (C) all the way in until you hear a “click”; this is the spark ignition.
* You can see through the glass window whether the pilot light is burning. “Click” a few more
times if necessary, until the pilot light ignites.
* Keep the thermostat knob (A) pushed in for about another 30 seconds when the pilot light starts
burning and then release the knob.
* If the pilot light does not continue to burn, wait 5 minutes and then repeat the procedure.
* The burner is ignited by turning the thermostat knob (A) to the required setting (between set
tings 1 and 7, depending on the required temperature).
* To ignite the appliance with the glow-effect burner, move the slide (B) from position n depend-
ing on the required flame height (see figure). The glow-effect burner only functions when the
thermostat knob is between positions 1 and 7 (position 1 = low, position 7 = high).
Remark
Position (1) on the thermostat knob (A) is the pilot light setting if the room temperature is 10°C or more. If
the room temperature is below 10°C, the burner will also start to burn in position (1) until the temperature
has risen to 10°C.
Especificaciones del producto
| Marca: | Thermocet |
| Categoría: | Endurecer |
| Modelo: | VERSA LV-HV |
¿Necesitas ayuda?
Si necesitas ayuda con Thermocet VERSA LV-HV haz una pregunta a continuación y otros usuarios te responderán
Endurecer Thermocet Manuales
8 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
Thermocet Trimline 83 Corner Left DB - 1182 Manual de Usario
8 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
Endurecer Manuales
- Endurecer Toolland
- Endurecer OneConcept
- Endurecer Landmann
- Endurecer Dimplex
- Endurecer Perel
- Endurecer Well Straler
- Endurecer Qlima
- Endurecer Dovre
- Endurecer Napoleon
- Endurecer Faber
- Endurecer Blumfeldt
- Endurecer Manor House
- Endurecer Edilkamin
- Endurecer Hwam
- Endurecer Bellfires
- Endurecer Xaralyn
- Endurecer Livin Flame
- Endurecer Spartherm
- Endurecer Brula
- Endurecer Stuv
- Endurecer Haas-Sohn
- Endurecer Thermorossi
- Endurecer Saey
- Endurecer M-design
- Endurecer Element4
- Endurecer Wanders
- Endurecer Blackline
- Endurecer JAcobus
- Endurecer Italiana Camini
- Endurecer Olsberg
- Endurecer Brunner
- Endurecer DRU
- Endurecer Ruby Fires
- Endurecer Hergom
- Endurecer Mondena
- Endurecer Godin
- Endurecer Kalfire
- Endurecer Barbas
- Endurecer Icon Fires
- Endurecer Big Fire
- Endurecer Jydepejsen
Últimos Endurecer Manuales
18 Octubre 2024
5 Octubre 2024
26 Septiembre 2024
23 Septiembre 2024
22 Septiembre 2024
21 Septiembre 2024
19 Septiembre 2024
17 Septiembre 2024
16 Septiembre 2024
16 Septiembre 2024