Thermocet Coventry S Manual de Usario
Lee a continuación 📖 el manual en español para Thermocet Coventry S (26 páginas) en la categoría Endurecer. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/26
Page 1
OPERATING AND INSTALLATION INSTRUCTIONS
CLASSIC FIRE
Flue and concentric connection
Models:
Brookfield S/CC
Coventry S/CC
Beverly S/CC
Beverly
Brookfield
Coventry
Page 2
TABLE OF CONTENTS
Introduction Page 4
1. General Page 4
Attention
Warranty
Versions
2. Operating instruction for AB version Page 5
2.1 Function of remote control
2.2 Ignite apparatus
2.3 Technical data
3. Operating instruction for HB version Page 7
3.1 Switching on the unit
3.2 Switching off the unit
4. Installation instruction for flue version Page 7
4.1 Fitting the unit
5. Fitting the cast iron construction Page 8
5.1 Fitting the combustion chamber
5.2 Taking out the glass panel
5.3 Replacing the glass panel
6. Fitting the log inset Page 8
7. Outlet protection Page 10
8. Distances to flammable materials Page 10
8. Gas technical specifications (Hi) Page 10
9. Gas technical specifications (Lo) Page 10
10. Technical data GV 60 Page 11
11. Technical data BM733 Page 11
12. Concentric flue system Page 11
12.1 Possibilities for connection
12.2 Construction of concentric flue system
13. Installation instructions for cast iron Beverly Page 14
14. Installation instructions for cast iron Brookfield/Coventry Page 16
15. Additional instructions for the Mertik Maxitrol GV60 and the remote control Page 18
Problems and possible solutions to them Page 20
Diagrams Page 22 t/m 24
Important tips Page 25
Warranty Certificate and Registration card
Warranty conditions Page 26
Subject to change
(1/18032008)
Page 3
We hope you really enjoy the warmth of your new gas fire Read these instructions carefully before install-
ing and starting to use the gas fire. Keep these instructions in a safe place. Always provide the following in-
formation if the gas fire breaks down: type and serial number.
1. General
The Classic Fire is supplied as a complete unit. Check the unit immediately after delivery to confirm that it has
not been damaged during transport. If it is damaged in any way, then please inform your supplier immediately
and provide as many details as possible Your fire has been enamelled using heat-resistant enamel that can with-
stand extremely high temperatures. Allow the fire to burn at the highest setting and ventilate the room thoroughly
during the first hours of use. As the enamel is cured, convection will cause a non-hazardous smell and/or some
smoke to be emitted. Any deposit on the heat-resistant glass should be removed immediately using a cleaner suit-
able for heat-resistant glass.
Attention
The Classic Fire must be installed, connected and inspected by a qualified fitter according to national and re-
gional standards., The fitter must inspect the unit for tightness in relation to gas and combustion products and the
correct operation of the different components and functions.
The flue tube system and the outlets in the outer wall (CC version) or roof face must also meet the requirements
of the appropriate regulations.
The concentric unit falls in the closed unit category in a set-up location without a fan and with a chimney loss
that is greater than 17 % (non-condensing).
Warranty
The registration/warranty card (see page 25 and 26) should be completed and sent to the manufacturer within ten
days after the purchase date. Please retain the warranty certificate. The type and serial number are listed on the
identification plate that you can find on the control entrance door of the Brookfield, Coventry and Beverly .
Versions fully assembled:
Brookfield CC (AB)
Brookfield CC (HB)
Brookfield S (AB)
Brookfield S (HB)
Coventry CC (AB)
Coventry CC (HB)
Coventry S (AB)
Coventry S (HB)
Beverly CC (AB)
Beverly CC (HB)
Beverly S (AB)
Beverly S (HB)
Especificaciones del producto
| Marca: | Thermocet |
| Categoría: | Endurecer |
| Modelo: | Coventry S |
¿Necesitas ayuda?
Si necesitas ayuda con Thermocet Coventry S haz una pregunta a continuación y otros usuarios te responderán
Endurecer Thermocet Manuales
8 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
Thermocet Trimline 83 Corner Left DB - 1182 Manual de Usario
8 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
Endurecer Manuales
- Endurecer Toolland
- Endurecer OneConcept
- Endurecer Landmann
- Endurecer Dimplex
- Endurecer Perel
- Endurecer Well Straler
- Endurecer Qlima
- Endurecer Dovre
- Endurecer Napoleon
- Endurecer Faber
- Endurecer Blumfeldt
- Endurecer Manor House
- Endurecer Edilkamin
- Endurecer Hwam
- Endurecer Bellfires
- Endurecer Xaralyn
- Endurecer Livin Flame
- Endurecer Spartherm
- Endurecer Brula
- Endurecer Stuv
- Endurecer Haas-Sohn
- Endurecer Thermorossi
- Endurecer Saey
- Endurecer M-design
- Endurecer Element4
- Endurecer Wanders
- Endurecer Blackline
- Endurecer JAcobus
- Endurecer Italiana Camini
- Endurecer Olsberg
- Endurecer Brunner
- Endurecer DRU
- Endurecer Ruby Fires
- Endurecer Hergom
- Endurecer Mondena
- Endurecer Godin
- Endurecer Kalfire
- Endurecer Barbas
- Endurecer Icon Fires
- Endurecer Big Fire
- Endurecer Jydepejsen
Últimos Endurecer Manuales
18 Octubre 2024
5 Octubre 2024
26 Septiembre 2024
23 Septiembre 2024
22 Septiembre 2024
21 Septiembre 2024
19 Septiembre 2024
17 Septiembre 2024
16 Septiembre 2024
16 Septiembre 2024